TI AM26S10CN

AM26S10C
QUADRUPLE BUS TRANSCEIVERS
SLLS116C – JANUARY 1977 – REVISED MARCH 1997
D
D
D
D
D
D OR N PACKAGE
(TOP VIEW)
Schottky Circuitry for High Speed, Typical
Propagation Delay Time . . . 12 ns
Drivers Feature Open-Collector Outputs for
Party-Line (Data Bus) Operation
Driver Outputs Can Sink 100 mA at 0.8 V
Maximum
pnp Inputs for Minimal Input Loading
Designed to Be Interchangeable With
Advanced Micro Devices AM26S10
GND
1B
1R
1D
2D
2R
2B
GND
1
16
2
15
3
14
4
13
5
12
6
11
7
10
8
9
VCC
4B
4R
4D
S
3D
3R
3B
description
The AM26S10C is a quadruple bus transceiver utilizing Schottky-diode-clamped transistors for high speed. The
drivers feature open-collector outputs capable of sinking 100 mA at 0.8 V maximum. The driver and strobe
inputs use pnp transistors to reduce the input loading.
The driver of the AM26S10C is inverting and has two ground connections for improved ground current-handling
capability. For proper operation, the ground pins should be tied together.
The AM26S10C is characterized for operation over the temperature range of 0°C to 70°C.
Function Tables
AM26S10C
(transmitting)
INPUTS
OUTPUTS
S
D
B
R
L
H
L
H
L
L
H
L
AM26S10C
(receiving)
INPUTS
S
B
D
OUTPUT
R
H
H
X
L
H
L
X
H
H = high level, L = low level, X = irrelevant
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
AM26S10C
QUADRUPLE BUS TRANSCEIVERS
SLLS116C – JANUARY 1977 – REVISED MARCH 1997
logic symbol†
logic diagram (positive logic)
AM26S10C
S
12
AM26S10C
S
EN1
4
3
1R
5
2D
6
2R
11
3D
10
3R
13
4D
14
4R
1D
1
2
7
9
15
1B
2B
3B
4B
† These symbols are in accordance with ANSI/IEEE Std 91-1984
and IEC Publication 617-12.
1D
1R
2D
2R
3D
3R
4D
4R
12
2 1B
4
3
7
5
2B
6
9 3B
11
10
15 4B
13
14
schematic (each transceiver)
B
VCC
110 Ω
NOM
2 kΩ
NOM
V
R
D
GND
V
2.7 kΩ
NOM
To Three
Other
Drivers
S
2
POST OFFICE BOX 655303
To One
Other
Receiver
• DALLAS, TEXAS 75265
To Two
Other
Receivers
AM26S10C
QUADRUPLE BUS TRANSCEIVERS
SLLS116C – JANUARY 1977 – REVISED MARCH 1997
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 7 V
Driver or strobe input voltage range, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.5 V
Bus voltage range, driver output off, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.5 V to 5.25 V
Driver or strobe input current range, II . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 30 mA to 5 mA
Driver output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 mA
Receiver output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 mA
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTE 1: All voltage values are with respect to network ground terminals connected together.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
D
950 mW
7.6 mW/°C
608 mW
N
1150 mW
9.2 mW/°C
736 mW
recommended operating conditions
Supply voltage, VCC
High levael input voltage
High-levael
voltage, VIH
Low level input voltage,
voltage VIL
Low-level
D or S
MIN
NOM
MAX
UNIT
4.75
5
5.25
V
2
B
D or S
0.8
B
1.75
Driver
100
Receiver high-level output current, IOH
Low level output current,
Low-level
current IOL
V
2.25
–1
Receiver
20
Operating free-air temperature, TA
0
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
70
V
mA
mA
°C
3
AM26S10C
QUADRUPLE BUS TRANSCEIVERS
SLLS116C – JANUARY 1977 – REVISED MARCH 1997
electrical characteristics over recommended operating free-air temperature range
PARAMETER
TEST CONDITIONS
VIK
Input clamp voltage
D or S
VOH
High-level output voltage
R
VCC = 4.75 V,
VCC = 4.75 V,
IOH = – 1 mA
VIH = 2 V,
VIL = 0.8 V,
VIH = 2 V,,
IOL = 20 mA
IOL = 40 mA
R
VOH
IO(off)
( )
Low level output voltage
Low-level
Off-stage output current
IIH
High level input current
High-level
II
Input current at maximum
input voltage
IIL
Low level input current
Low-level
IOS
Short-circuit output current‡
ICC
Supply current
VCC = 4.75 V,,
VIL = 0.8 V
B
VIH = 2 V,
V
VIL = 0
0.8
8V
B
D
S
D or S
D
S
R
MIN
TYP†
II = – 18 mA
2.7
MAX
UNIT
– 1.2
V
3.4
V
0.5
IOL = 70 mA
IOL = 100 mA
0.33
0.5
0.42
0.7
0.51
0.8
VCC = 5.25 V,
VCC = 5.25 V,
VO = 0.8 V
VO = 4.5 V
– 50
VCC = 0,
VO = 4.5 V
100
25 V
VCC = 5
5.25
V,
7V
VI = 2
2.7
VCC = 5.25 V,
VI = 5.5 V
25 V
VCC = 5
5.25
V,
4V
VI = 0
0.4
100
30
20
100
– 0.54
– 0.36
VCC = 5.25 V
– 18
VCC = 5.25 V,,
Strobe at 0 V,,
All driver outputs low
– 60
45
No load,,
V
70
80
µA
µA
µA
mA
mA
mA
† All typical values are at TA = 25°C and VCC = 5 V.
‡ Not more than one output should be shorted to ground at a time, and duration of the short circuit should not exceed one second.
switching characteristics, VCC = 5 V, TA = 25°C
PARAMETER
tPLH
tPHL
Propagation delay time, low-to-high-level output
tPLH
tPHL
Propagation delay time, low-to-high-level output
tPLH
tPHL
Propagation delay time, low-to-high-level output
tTLH
tTHL
4
Propagation delay time, high-to-low-level output
Propagation delay time, high-to-low-level output
Propagation delay time, high-to-low-level output
FROM
(INPUT)
TO
(OUTPUT)
D
B
S
B
B
R
Transition time,
low-to-high-level output
TEST
CONDITIONS
AM26S10C
MIN
See Figure 1
TYP
MAX
10
15
10
15
14
18
13
18
10
15
10
15
4
10
2
4
B
Transition time,
high-to-low-level output
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
ns
ns
ns
ns
AM26S10C
QUADRUPLE BUS TRANSCEIVERS
SLLS116C – JANUARY 1977 – REVISED MARCH 1997
PARAMETER MEASUREMENT INFORMATION
VCC
Pulse
Generator
(see Note A)
50 Ω
280 Ω
Driver
Receiver
See Note C
50 pF
(see Note B)
15 pF
(see Note B)
Pulse
Generator
(see Note A)
D
S
B
R
TEST CIRCUIT
3V
1.5 V
Driver Input
3V
1.5 V
0V
Strobe Input
tPLH
D to B
tPHL
D to B
tPLH
S to B
tPHL
S to B
VOH
1.5 V
VOL
Bus
tPHL
B to R
tPLH
B to R
tPHL
B to R
tPLH
B to R
VOH
1.5 V
VOL
Receiver Output
VOLTAGE WAVEFORMS
NOTES: A. The pulse generators have the following characteristics: ZO = 50 Ω, tr = 10 ± 5 ns.
B. Includes probe and jig capacitance.
C. All diodes are 1N916 or equivalent.
Figure 1. Test Circuit and Voltage Waveforms
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
AM26S10C
QUADRUPLE BUS TRANSCEIVERS
SLLS116C – JANUARY 1977 – REVISED MARCH 1997
APPLICATION INFORMATION
Strobe
Driver
Inputs
Receiver
Outputs
D DD D
5V
Strobe
S R
AM26S10C
Driver
Inputs
Receiver
Outputs
D DD D
R
S R
B
B
B
R
S R
AM26S10C
B
B
B
B
R
R
5V
R
R
B
B
B
B
R
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
100 Ω
100-Ω Transmission Line
Figure 2. Party-Line System
6
Receiver
Outputs
D DD D
R
AM26S10C
R
B
Strobe
Driver
Inputs
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1998, Texas Instruments Incorporated