Ordering number : EN*A1404 Thick-Film Hybrid IC STK628-130-E Inverter for IH Cooker Inverter Hybrid IC Overview The STK628-130-E is a inverter power hybrid IC for IH cooker containing power devices (IGBT and FRD), pre-driver, and temperature monitor. Applications • Inverter for IH cooker. Features • Built in integrates power devices (IGBT and FRD), pre-driver circuit. • Built in thermal protection. • The temperature monitor is enabled through the use of an internal thermistor. • A single power supply drive is enabled with using of internal bootstrap circuits for upper power supplies. • Direct input of control signal is possible. • SIP (the single in-line package). Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to "standard application", intended for the use as general electronics equipment (home appliances, AV equipment, communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee thereof. If you should intend to use our products for applications outside the standard applications of our customer who is considering such use and/or outside the scope of our intended standard applications, please consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely responsible for the use. Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer' s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer' s products or equipment. 20409HKIM No. A1404-1/6 STK628-130-E Specifications Absolute maximum ratings at Tc = 25°C Parameter Supply voltage Symbol Conditions Ratings VCC Unit 400 V Collector-emitter voltage VCE +-- 600 V Output current IO +, -, OUT terminal current ±60 A Output peak current Iop +, -, OUT terminal current PW=100μs, 1pulse Pre-driver supply voltage VL VL - VSS VDD VDD - VSS Input signal voltage VIN HIN, LIN ,SD terminal Maximum loss Pd Junction-to-substrate thermal resistance Junction temperature ±90 A 0 to 18 V 0 to 18 V -0.3 to VDD+0.3 V IGBT, Per 1 pcs 135 W θj-c(T) IGBT, Per 1 pcs 0.9 θj-c(D) DIODE, Per 1 pcs 1.9 Tj IGBT, FRD junction temperature 150 °C -40 to +125 °C Storage temperature Tstg Operating temperature TC H-IC case temperature Tightening torque MT A screw part *1 -20 to +100 °C/W °C 1.0 N•m max unit In the case without the instruction, the voltage standard is VSS terminal voltage. *1 Flatness of the heat-sink should be lower than 0.25mm. Electrical Characteristics at Tc=25°C, VL, VDD=15V Parameters Symbols Conditions min typ Power output part Collector-to-emitter cut-off current ICE VCE=600V Collector-to-emitter saturation voltage VCE (sat) IO=60A, Ch+, Ch- Diode forward voltage VF IO=-40A, Ch+, Ch- ID VL, VDD=15V Input ON voltage VIH Output ON Input OFF voltage VIL Output OFF Excessive temperature TSD The substrate surface Temperature mounting resistance Rt TH-VSS value Monitor resistor B-constant B 25/50 °C Switching time ton IO=50A, Inductive load 150 μA 1.8 2.5 V 1.6 2.2 V 0.7 2.0 mA Control (Pre-driver) part Pre-drive power supply consumption electric current 9.5 V 6.0 90 100 4250 toff 0.7 0.7 V °C 110 110 kΩ k μs In the case without the instruction, the voltage standard is VSS terminal voltage. Notes 1. Input ON voltage indicates a value to turn on output stage IGBT. Input OFF voltage indicates a value to turn off output stage IGBT. At the time of output ON, set the input signal voltage VIH (min.) to VDD (max.). At the time of output OFF, set the input signal voltage 0V to VIL (Max.). 2. When assembling the hybrid IC on the heat sink, tightening torque range is 0.8N•m to 1.0N•m. Flatness of the heat-sink should be lower than 0.25mm. No. A1404-2/6 STK628-130-E Package Dimensions unit:mm (typ) 1 26.2 (24.0) 13.1 21.8 3.6 (3.6) 60.0 23 4.2 2.0 0.5 0.75 5.0 6.0 22 2.0=44.0 (50.0) 67.0 Internal Block Diagram VB 6 1 VDD 19 2 +VCC 3 VL 20 LIN 21 7 8 Driver IC SD OUT 9 22 10 HIN 23 13 VSS 18 14 Thermal sensor -VCC 15 16 17 12 11 4 5 TH1 TH2 NC NC NC NC No. A1404-3/6 STK628-130-E Test Circuit +shows the upper side and - shows the lower side. Fig.1 ICEO (IGBT/FRD) ICEO (IGBT/FRD) ICE CH+ CH- M 1 9 N 7 14 A M VCE N Fig.2 VCE(sat) (Test by the pulse) CH+ CH- M 1, 2, 3 7, 8, 9, 10 N 7, 8, 9, 10 13, 14, 15 m 23 21 M VB=15V 6 7 VDD=15V 19 18 VCE m VL=15V IO V (sat) 20 18 N Fig.3 VF (Test by the pulse) CH+ CH- M 1, 2, 3 7, 8, 9, 10 N 7, 8, 9, 10 13, 14, 15 M IO V VF N No. A1404-4/6 STK628-130-E Fig.4 Switching time (example: ch1-) VB=15V 1 2 3 6 Input 7 VDD=15V 7 8 9 19 18 VCC Iout 90% CS Signal input 10% 10 21 VL=15V ton 20 Iout 13 14 18 toff Example of The Application Circuit HIN SD LIN TH1 TH2 VSS VDD VL -VCC NC -VCC -VCC OUT NC +VCC +VCC +VCC NC NC VB OUT OUT OUT STK628-130-E 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1μF VCC 0.68μF 4.7μF Thermal Sensor 0.047μF Control Logic L (55μH) 0.047μF 0.68μF +15V 10μF GND GND Recommended Operating Conditions Parameters Symbol Conditions min typ max unit Supply voltage VCC +VCC - -VCC 283 330 V Pre-driver supply voltage VDD VDD - VSS *1 13 15 18 V Input ON voltage VIN (ON) HIN, LIN, SD - VSS terminal 11 13 18 Input OFF voltage VIN (OFF) PWM frequency fPWM Tightening torque MT V 5 20 ‘M3’ Type Screw 0.8 60 kHz 1.0 N•m Usage Precautions 1. This IC has a built-in thermistor between the TH terminal 1 (16pin) and TH terminal 2 (17pin). It allows monitoring of the board temperature using the divided voltage developed with the pull-up resistance RP. The resistance of the RP must be 10kΩ or higher at a pull-up voltage of 5V and 39kΩ or higher at a pull-up voltage of 15V. No. A1404-5/6 STK628-130-E -IF - VF [FRD] IC - VCE(sat) 100 [IGBT] Tc=25°C 80 60 60 IC - A 25 10 °C 0° C -IF - A 20V 80 40 40 20 0 0.6 10V 15V 100 20 0 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VF - V ITF02656 VCE(sat) - Tc 3.2 2.2 [IGBT] 0 0.5 1.0 1.5 2.0 2.5 3.0 VCE(sat) - V 3.5 4.0 ITF02657 VGE=15V 2.8 IC=100A 80A VCE(sat) - V 2.4 2.0 60A 40A 1.6 20A 1.2 0.8 0.4 0 10 20 30 40 50 60 Tc - °C 70 80 90 100 110 ITF02658 SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein. SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are controlled under any of applicable local export control laws and regulations, such products may require the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written consent of SANYO Semiconductor Co.,Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO Semiconductor Co.,Ltd. product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. Upon using the technical information or products described herein, neither warranty nor license shall be granted with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's intellectual property rights which has resulted from the use of the technical information and products mentioned above. This catalog provides information as of February, 2009. Specifications and information herein are subject to change without notice. PS No. A1404-6/6