HD1750JL Very high voltage NPN power transistor for high definition and slim CRT display PRELIMINARY DATA Features ■ State-of-the-art technology: diffused collector “enhanced generation“ EHVS1 ■ Wider range of optimum drive conditions ■ Less sensitive to operating temperature variation ■ In compliance with the 2002/93/EC European directive 1 2 3 TO-264 Description The HD1750JL is manufactured using Diffused Collector in Planar technology adopting new and Enhanced High Voltage Stricture 1 (E.H.V.S.1) developed to fit High-Definition CRT display. The new HD product series show improved silicon efficiency bringing updated performance to the Horizontal Deflection stage. Internal schematic diagram Applications ■ High-definition and slim CRT TV and monitors Order code Part number Marking Package Packaging HD1750JL HD1750JL TO-264 Tube February 2007 Rev 3 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/10 www.st.com 10 Electrical ratings 1 HD1750JL Electrical ratings Table 1. Absolute maximum ratings Symbol Value Unit VCES Collector-emitter voltage (VBE = 0) 1700 V VCEO Collector-emitter voltage (IB = 0) 800 V VEBO Emitte-base voltage (IC = 0) 10 V Collector current 24 A Collector peak current (tP < 5ms) 36 A Base current 12 A IBM Base peak current (tP < 5ms) 18 A PTOT Total dissipation at Tc = 25°C 200 W TSTG Storage temperature -65 to 150 °C 150 °C IC ICM IB TJ Table 2. Symbol RthJ-C 2/10 Parameter Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case max Value Unit 0.625 °C/W HD1750JL 2 Electrical characteristics Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol Electrical characteristics Parameter ICES Collector cut-off current (VBE = 0) IEBO Emitter cut-off current (IC = 0) Collector-emitter VCEO(sus)(1) sustaining voltage (I = 0) B VEBO(1) Emitter-base saturation voltage (IC = 0) Test conditions Max. Unit VCE = 1700V; TC = 125°C 0.2 2 mA mA VEB = 5V 10 µA IC = 10mA 800 V IE = 10mA 10 V Collector-emitter saturation IC = 12A; IB = 3A voltage VBE(sat)(1) Base-emitter saturation voltage ts tf DC current gain Inductive load Storage time Fall time Typ. VCE = 1700V VCE(sat)(1) hFE Min. IC = 12A; IB = 3A 0.95 IC = 1A; VCE = 5V IC = 12A; VCE = 5V IC = 12A; IB(on)= 1.8A 3 V 1.5 V 30 5.5 8.5 IB(off)= -7.25A; VCE(fly)= 1320V; VBE(off)= -2.7V; LBB(on)= 0.8µH; 3 300 3.6 450 µs ns 1.6 110 2 220 µs ns fh= 31520Hz IC = 6.5A; ts tf Inductive load Storage time Fall time IB(on)= 1.1A IB(off)= -5.25A; VCE(fly)= 1220V; VBE(off)= -2.7V; LBB(on)= 0.25µH; fh= 100kHz 1. Pulsed: pulse duration = 300µs, duty cycle < 2% 3/10 Electrical characteristics 2.1 4/10 HD1750JL Electrical characteristics (curve) Figure 1. Safe operating area Figure 2. Derating curve Figure 3. Output characteristics Figure 4. Reverse biased SOA Figure 5. DC current gain Figure 6. DC current gain HD1750JL Electrical characteristics Figure 7. Collector-emitter saturation voltage Figure 8. Base-emitter saturation voltage Figure 9. Power losses Figure 10. Power losses Figure 11. Inductive load switching time Figure 12. Inductive load switching time 5/10 Test circuit 3 HD1750JL Test circuit Figure 13. Power losses and inductive load switching test circuit Figure 14. Reverse biased safe operating area test circuit 6/10 HD1750JL 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/10 Package mechanical data Table 4. TO-264 Mechanical Data Figure 15. TO-264 Drawing 8/10 HD1750JL HD1750JL 5 Revision history Revision history Table 5. Revision history Date Revision Changes 12-Oct-2006 1 Initial release. 17-Oct-2005 2 Final document 23-Feb-2007 3 The document has been reformatted 9/10 Revision history HD1750JL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10