MD2103DFH High voltage NPN power transistor for standard definition CRT display General features ■ State-of-the-art technology: – Diffused collector “enhanced generation” ■ More stable performance versus operating temperature variation ■ Low base drive requirement ■ Tighter hFE range at operating collector current ■ Fully insulated power package U.L. compliant ■ Integrated free wheeling diode ■ In compliance with the 2002/93/EC European Directive 1 2 3 TO-220FH Description Internal schematic diagram The MD2103DFH is manufactured using Diffused Collector in Planar technology adopting new and enhanced high voltage structure. The new MD product series show improved silicon efficiency briging updated performance to the horizontal deflection stage. Applications ■ RBE=65Ω (typ) Horizontal deflection output for TV Order codes Part number Marking Package Packing MD2103DFH MD2103DFH TO-220FH Tube July 2006 Rev 1 1/11 www.st.com 11 MD2103DFH Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 MD2103DFH 1 Electrical ratings Electrical ratings Table 1. Absolute maximum rating Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE =0) 1500 V VCEO Collector-emitter voltage (IB =0) 700 V VEBO Emitter-base voltage (IC =0) 7 V Collector current 6 A Collector peak current (tP < 5ms) 9 A Base current 3 A Ptot Total dissipation at Tc ≤25°C 38 W VINS Insulation withstand voltage (RMS) from all three leads to external heatsink 2500 V Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 3.3 °C/W IC ICM IB TJ Table 2. Symbol Max. operating junction temperature Thermal data Parameter Rthj-case Thermal resistance junction-case __max 3/11 Electrical characteristics 2 MD2103DFH Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol Electrical characteristics Parameter Test conditions Typ. VCE = 1500V Max. Unit 0.2 2 mA mA 125 mA ICES Collector cut-off current (VBE =0) IEBO Emitter cut-off current (IC =0) VEB = 5V Emitter-base brakdown voltage (IC = 0) IE = 700mA VCE(sat) (1) Collector-emitter saturation voltage IC = 3A _ _ IB =0.75A 1.8 V VBE(sat) (1) Base-emitter saturation voltage IC = 3A _ _ IB =0.75A 1.5 V IC = 1A VCE =5V 17 IC = 3A VCE =1V 6 IC = 3A VCE =5V IC =3A fh =16kHz V(BR)EBO hFE (1) ts tf VF DC current gain Inductive load Storage time Fall time VCE = 1500V TC = 125°C 50 11 IB(on) =0.5A VBE(off) =-2.7V LBB(off) =6.3µH (see Figure 11) Diode forward voltage IF = 3A Note (1) Pulsed duration = 300 µs, duty cycle ≤1.5% 4/11 Min. 6.5 V 9.5 3.8 µs 0.25 µs 2 V MD2103DFH 2.1 Electrical characteristics Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Derating curve Figure 3. Output characteristics Figure 4. Reverse biased SOA Figure 5. DC current gain Figure 6. DC current gain 5/11 Electrical characteristics 6/11 MD2103DFH Figure 7. Collector-emitter saturation voltage Figure 8. Base-emitter saturation voltage Figure 9. Power losses Figure 10. Inductive load switching time MD2103DFH 2.2 Electrical characteristics Test circuits Figure 11. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 7/11 Package mechanical data 3 MD2103DFH Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/11 MD2103DFH Package mechanical data TO-220FH (Fully plastic High voltage) MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 4.4 4.6 0.173 0.181 B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.3 1.8 0.051 0.070 F2 1.3 1.8 0.051 0.070 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 L2 16 L3 28.6 30.6 1.126 L4 9.8 10.6 0.385 L5 0.409 0.630 3.4 1.204 0.417 0.134 L6 15.9 16.4 0.626 0.645 L7 9 9.3 0.354 0.366 L8 14.5 15 0.570 L9 2.4 0.590 0.094 P011W 9/11 Revision history 4 MD2103DFH Revision history Table 4. 10/11 Revision history Date Revision 25-Jul-2006 1 Changes First release MD2103DFH Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11