FTP-62ADSL000 Series interface boards for 24V FTP-60A Series FTP-62ADSL000 Series nHIGHLIGHTS • 24V FTP-60A series I/F board for 2-, 3- and 4-inch mechanisms • Supports serial (RS-232C) or USB (V.2.0) I/F • Supports 2-D bar codes and graphics • Windows®2000/XP/Vista, Linux, OPOS drivers, CE 5.0 • UL File No. E171434 • RoHS compliant n Part numbers Part Number Interface Type Cutter Control DIP Switch FTP-62ADSL000 USB / RS-232C Yes Yes Remarks Mechanism Part Number Evaluation All part numbers board only PRELIMINARY FTP-62ADSL001 USB Yes No USB printer FTP-62ADSL011 Serial Yes No RS-232C FTP-62ADSL021 USB Yes No USB com FTP-62ADSL002 USB Yes No USB printer FTP-62ADSL012 Serial Yes No RS-232C FTP-62ADSL022 USB Yes No USB com FTP-63AMCL001 FTP-63AMCL011 FTP-63AMCL401 FTP-63AMCL411 FTP-63AMCL101 FTP-63AMCL111 FTP-63AMCL301 FTP-63AMCL311 ninterface specification at host side Item Specifications RS-232C Data speed: Synchronous method: Handshake: Input/output level: 460.8k / 230.4k / 115.2k / 19.2k / 9.6k / 4.8k bps Full duplex DTR/DSR, XON/XOFF control RS-232C USB V1.1 Data speed: Data input/output method: Full speed 12Mbps Referential data input/output n Dip switch Setting DSW1 Bit No. Setting Function OFF ON 1 Communication setting USB printer USB com 2 Cutter type setting Slide cutter Rotary cutter Shipment setting OFF OFF*1 Note: *1: Please change to the setting for the mechanism used. Mechanism might malfunction when using the wrong setting. 1 FTP-62ADSL000 Series nDimensions 1. External specifications 1.1 External view of control circuit board PRELIMINARY Part side H=15mm(MAX) Board t=1.2mm Solder side H=5mm(MAX) Unit: mm 1.2 Control circuit board connector types Symbol Name Function CN1 Power supply connector To connect +24V power supply SM10B-PASS-TBT (LF)(SN) JST RS-232C I/F control signal connector To connectRS-232C interface & control signals S9B-ZR-SM4A-TF (LF)(SN) JST USB I/F connector To connect USB interface 51387-0530 Molex CN2*1 CN3 *1 Type case CN4 Thermal head connector To connect thermal head CN5 Paper feed & cutter connector To connect paper feed motor & LY20-18P-DL1-P5E cutter motor JST Drawer kick connector To connect drawer kick S6B-ZR-SM4A-TF (LF)(SN) JST CN7 Operation panel connector To connect operation panel S7B-ZR-SM4A-TF (LF)(SN) JST CN8 Near end sensor connector To connect near end detection switch S3B-PH-SM4-TB (LF)(SN) JST CN9 External sensor connector To connect external detection switch S4B-PH-SM4-TB (LF)(SN) JST CN6 *1 CN10 *2 ----Notes: *1: Depends on the board type *2: not mounted B30B-PHDSS (LF)(SN) Manufacturer JST --- 2 FTP-62ADSL000 Series 1.Connector for Head, Motor Power Supply (CN1) Connector part number: *SM10B-PASS-TBT (J.S.T) or equivalent (P.C.B. side) Mating connector: PAP-10V-S (J.S.T) or equivalent (P.C.B. side) No Signa l I/ O Content s N o Signa l I/ O Content s 1 +24 V I Power for head 2 +24V I Power for head 3 +24 V I Power for head 4 +24V | Power for head 5 +24V | Power for head 6 GND - Ground 7 GND - Ground 8 GND - Ground 9 GND - Ground 10 GND - Ground nInterface 2. RS-232C standard (1) Connector (CN2) Connector part number : S9B-ZR-SM4A-TF (J.S.T.) or equivalent Mating connector part number : ZHR-9 (J.S.T.) or equivalent (2) Connector pin assignment No Signa l I/ O 1 FG - No Signa l I/ O Frame ground 2 RD I TD O Transmission data 4 DTR O Data terminal ready GN D - Signal ground 6 DSR I Data set ready 7 SLCTI N I Printer select 8 INPRM I Reset 9 AF T I Paper feed request No Signa l I/ O 2 D- 4 N.C. 3 5 Content s Content s Receive Data PRELIMINARY 3.USB standard (1) Connector (CN3) Connector part number: 51387-0530 (Molex) Mating connector part number: UX40-MB-5P (Hirose) (2) Connector pin assignment No Signa l I/ O 1 VBU S I 3 D+ 5 GN D Content s Bus Power Supply I/ O Differential data + - Content s I/ O Differential data - No connection Signal ground Notes: • Symbol “——” means a negative logic signal. • “I” or “O” means a signal direction from the interface board side. 3 FTP-62ADSL000 Series nCONNECTOR PIN ASSIGNMENt of Control Board (fpc) 1. Thermal head control circuit side (CN4) Control circuit side: Mechanism side: No. Signal 1 VH 3 I/O B30B-PHDSS (LF) (SN) JST ) PHDR-30VS (J.S.T) Contents No. Signal I/O Contents O Head drive power 2 VH O Head drive power VH O Head drive power 4 VH O Head drive power 5 DI 1 I Data out 1 6 DO 1 O Data in 1 7 GND - Head ground 8 GND - Head ground 9 GND - Head ground 10 GND - Head ground 11 GND - Head ground 12 STB 1 O Strobe 1 13 CLK O Clock 14 LAT O Data latch 15 Vdd O Logic 16 GND - Ground 17 TH I Thermistor 18 STB 2 O Strobe 2 19 GND - Ground 20 GND - Ground 21 GND - Ground 22 GND - Ground 23 DI 2 I Data out 2 24 DO 2 O Data in 2 25 VH O Head drive power 26 VH O Head drive power 27 VH O Head drive power 29 VH O Head drive power 29 N.C. PRELIMINARY - Not connected 30 N.C. - Not connected 2. Motor, Sensor (CN5) Control circuit side: Mechanism side: LY20-18P-DL1-P5E (JAE) LY10-DC18 (JAE) No. Signal I/O Contents No. Signal I/O Contents 1 MT A I/O Motor excitation signal A (cutter) 2 MT B I/O Motor excitation signal B (cutter) 3 MT B I/O Motor excitation signal B (cutter) 4 MT A I/O Motor excitation signal A (cutter) 5 SVCC O Power supply for photointerruptor 6 CHP I Cutter photointerruptor (emitter) 7 CSEK I Cutter photointerruptor (cathode) 8 GND - Ground 9 TH I Thermistor 10 PSEK I Paper detection photointerruptor (cathode) 11 MT A I/O Motor excitation signal A (paper) 12 PES I Paper detection photointerruptor (emitter) 13 MT B I/O Motor excitation signal B (paper) 14 SVCC O Power supply for photointerruptor 15 MT B I/O Motor excitation signal B (paper) 16 SEK I Lever detection photointerruptor (cathode) 17 MT A I/O Motor excitation signal A (paper) 18 HUP I Lever detection photointerruptor (emitter) n INTERFACE COMMAND OPTIONS Please refer to the FTP-62ADSL series datasheet 4 FTP-62ADSL000 Series ■■ 3.Connector for Drawer Kick (CN6) Board side: Remote side: S6B-ZR-SM4A-TF (J.S.T) ZHR-6 (J.S.T.) No. Signal I/O 1 Power supply +24V O 3 Drawer kick2 control 5 Drawer kick1 sensor Contents No. Signal I/O Contents Drawer kick 2 Drawer kick1 control | Drawer kick1 control | Control Z terminal 4 Drawer kick1 sensor | Drawer kick2 control | Sensor2 6 +3V GND - Ground terminal for sensor 4.Connector for Operation Panel (CN7) No. CONNECTOR PIN ASSIGNMENt of INTERFACE BOARd Connector part number: S7B-ZR-SM4A-TF (J.S.T) or equivalent Mating connector: ZHR-7 (J.S.T.) Signal I/O Contents No. Signal I/O Contents 1 ATF | Motor Phase A 2 IMPRM | Reset 3 SLCTIN | Motor Phase B 4 3V GND - Logic ground 5 LED1 O LED 1 output 6 LED2 O LED 2 output 7 3.3V O Logic power 5.Connector for Paper Near-End Sensor (CN8) Connector part number: *B3B-PH-SM4-TB (J.S.T) or equivalent (P.C.B. side) Mating connector: PHR-3 PRELIMINARY No Signa l I/ O 1 +3V O 3 NES | Content s N o Signa l Power for logic 2 NC I/ O - Content s Not connected Paper near end signal 6.Connector for External I Sensor (CN9) Connector part number: B4B-PH-SM4-TB (J.S.T.) or equivalent No Signa l I/ O Content s No Signa l I/ O Content s 1 +3 V O Logic for Power 2 SEK | Paper Near End Signal 3 SENS | Paper Near End Signal 4 SVCC O Paper Near End Signal 7.Connector for Presenter (CN10) Connector part number: SM09B-SRSS-TB (J.S.T.) or equivalent No. Signal I/O Contents No. Signal I/O Contents 1 tbd 2 tbd 3 tbd 4 tbd 5 tbd 6 tbd 7 tbd 8 tbd 9 tbd tbd 5 FTP-62ADSL000 Series ■■ COMMANDS Command HT LF FF Moves print position to the next tab. Line feed. Feeds forms (new page). ESC EM+n Setting the amount of the feeding at automatic paper feed. ESC FF Data printing in page print mode. ECS RS Sets reverse printing. ESC US Resets reverse printing. ESC SP+n Character spacing setting. ESC ! + n Sets print mode. ESC $+n1+n2 Absolute position specification. ESC % + n External registration character specification/cancellation. ESC & +y+c1+c2+x+d1to dn External registration character definition. ESC *+m+n1+n2+d1+dN Sets bit image mode. ESC -+n Underline settting. ESC 2 Sets 1/6 inch line feed length. ESC 3+n Sets the line feed length. ESC ? + n External registration character deletion. ESC @ Printer initialization. ESC A+n Sets the space between the line. ESC C+n Sets the page length by character line. ESC D+d1+dN +NUL Sets the tab position. ESC E +n Highlighted printing specification/cancellation. ESC J+n Feeds paper in forward direction and prints. ESC K+n Reverse paper feed. ESC L Page printing mode selection. ESC Q + n +! + j Frame overlay function (page mode selection) ESC R+n Selects international character. ESC S Line printing mode. ESC T + n Page print mode print direction setting. ESC V+n Right Rotation 90° specification / cancellation. Contents PRELIMINARY 6 FTP-62ADSL000 Series Command Contents ESCW+x1+x2+y1+y2+d1+dX1+dX2+dY1+dy2 Page print mode print area setting ESC X+n+m Setting the turning time of the motor excitation. ESC Y+01n+ESC Program download. ESC Y+n1+n2 ESC a+n ESC c+1+n ESC c+5+n Horizontal position setting. Position alignment. Sets internal processing. Paper feed key valid/invalid setting. ESC d+n Printing and n-line feeding. ESC e+n Prints and reverse feeds n-lines. ESC r+n+t1+t2 Specified pulse generation. ESC s+n Sets printing speed. ESC t+n Character code table selection. ESC v Paper detector status transmission. ESC {+n Sets/resets upside down printing. FS !+n Kanji printing mode collective specification. FS & Kanji printing mode specification. FS*+m+n1+n2+d1 to dn High speed collective image printing specified. FS -+n Kanji underline specification/cancellation. FS . Kanji printing mode cancellation. FS 2+c1+c2+d1 to dn External character definition. FS 9+n Sets the detection functions. FS C+n Kanji code system selection. FS E+n Correction of impressed energy. FS S+n1+n2 Kanji spacing setting.*1 FS W+n Kanji double height and width printing specification/cancellation. FS r+n*1 Parameter transmission (serial mode). GS$+n1+n2 Horizontal position setting. GS !+n Character size setting. GS &+m+x+y1+y2+d1 to dN Registered bit image definition. GS '+m+n Registered bit image printing. Registered bit definition. PRELIMINARY GS *+x+y+d to dx 7 FTP-62ADSL000 Series Command Contents GS/+m Registered bit image printing. GS : Macro definition start /end. GS < Line feeds to the next mark. GE f+n HRI character font selection. GS h+n Barcode height setting. Barcode printing (number of characters specification mode). GS k+m+n+d1~dk+NUL Bar code printing (Nul end mode). GS k+m+k1+k2+k3+k4+ {[p1]}[d(1,1)]~[d(1,j)]}~{[pi] [d(i,1)]~[d(i,j)]}[00]h QR two dimensional code printing. GS k+m+k1+k2+k3+k4+k5;d1~dn Maxi two dimensional code printing. GS k+m+n+d1~dn GS k+m+k1+k2+k3+k4+k5+k6+d1~dn PDF 417 two dimensional code printing. GS r+n Peripheral status transmission. GS v Control board information transmission. GS w+n Barcode horizontal size setting. PRELIMINARY GS (+C+n1+n2+m+fn+b+d1~dn) GS A+m+n GS B+n GS E+n Printer customize. Sets the line feed length after mark detection. Angle setting of bar code. Sets print quality. GS H+n HRI character print position selection. GS L+Nn+n2 Left margin setting. GS M+n Mark detection correction. GS V+n+m Paper cutting (this command is only available for chip). GS Wn1+n2 Setting and cancellation of auto status transmission (serial mode). GS Y+n1+n2 Character vertical absolute position setting. GS a+n HRI character font selection. GS e+m+n Sets bar code height. *1: These commands are valid with FTP-62ADSL series. 8 FTP-62ADSL000 Series ■■ OPTIONS 1. Cables Name Operation Panel InterfaceCable(between board and equipment) Extension Cables Power Supply Cable Part Number Length (mm) (CN7) FTP-627Y203 500 (19.7 inches) RS232C (CN2) FTP-629Y302 500 (19.7 inches) USB (CN3) FTP-629Y301 1000 (34.4 inches) Head (CN4) FTP-62AY001 300 (11.8 inches) Platen, cutter, motor (CN5) FTP-62AY003 300 (11.8 inches) Logic, head, motor (CN 1) FTP-62AY601 300 (11.8 inches) 2. Driver LSI of Control Board Name ROM MCUandSRAM Part Number FTP-62ASR201 MB91302A MB91101A Quantity / Tray Remarks 96 - 3. Paper holder Name Paper Flange Paper Stand Part number FTP-040HF FTP-040HS PRELIMINARY Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2012 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. September 10 , 2012. 9 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Fujitsu: FTP-62ADSL000 FTP-62AY601