ALUMINUM ELECTROLYTIC CAPACITORS SP 7mmL, Bi-Polarized series Bi-polarized series with 7mm height. Extended capacitance range by an addition of φ8 product. Compliant to the RoHS directive (2011/65/EU). SP SA Bi-polarized Specifications Item Performance Characteristics Category Temperature Range –40 to +85˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.05CV or 10 (µA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120 Hz Stability at Low Temperature Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio Z– 40˚C / Z+20˚C ZT / Z20 (MAX.) 6.3 4 8 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 2000 hours at 85°C with the polarity inverted every 250 hours. Endurance 10 3 6 16 2 4 25 2 4 35 2 3 50 2 3 Within ±20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan δ Leakage current After storing the capacitors under no load at 85˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33µF) Radial Lead Type 1 Sleeve (P.E.T.) Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 10 D 11 D U2 S3 P4 15 A6 37 38 09 M US P 1 A 3 3 0 M DD 1 φd φd L+1MAX L+1MAX 15MIN 15MIN Capacitance (±20%) Ratedtolerance capacitance (33µF) Rated capacitance (33µF) Rated voltage (10V) (mm) 4MIN 4 φD 4MIN P±0.5 P±0.5 φD+0.5MAX φD+0.5MAX Configuration Configuration Capacitance tolerance (±20%) 5 Rated voltage (10V) Series name 6.3 (mm)8 Series name Type φD P 4 1.5 5 2.06.3 2.5 8 3.5 P φd 1.50.452.00.452.50.453.5 0.5 φd 0.45 0.45 0.45 0.5 Type Configuration Configuration φD φ D4 to 8 Pb-free leadwire Pb-free PET sleeve Pb-free leadwire Pb-free PET DD sleeve 4 to 8 DD Dimensions V Cap.(μF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 6.3 0J 0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7 10 1A 42 58 95 140 0.4 × 7 0.5 × 7 6.3 × 7 6.3 × 7 0.8 × 7 16 1C 24 40 56 67 110 0. 0.4 × 7 0.5 × 7 6.3 × 7 6.3 × 7 6.3 × 7 8×7 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 18 30 51 63 75 125 0.5 × 7 6.3 × 7 6.3 × 7 0.8 × 7 0.8 × 7 35 1V 21 35 53 73 87 0.4 × 7 0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7 16 22 37 62 76 50 1H 0.4 × 7 0.4 × 7 0.4 × 7 0.4 × 7 0.4 × 7 0.4 × 7 0.5 × 7 6.3 × 7 0.8 × 7 0.8 × 7 1.0 2.3 3.5 5.0 10 14 20 27 44 65 Case size φ D × L (mm) Rated ripple Rated ripple current (mArms) at 85˚C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 25 1E 10 kHz or more 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D