ALUMINUM ELECTROLYTIC CAPACITORS ST 7mmL, Wide Temperature Range series Wide temperature range of – 55 to +105˚C, with 7mm height. Compliant to the RoHS directive (2011/65/EU). ST High Temperature SA Specifications Item Performance Characteristics Category Temperature Range –55 to +105˚C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.1 to 220µF Capacitance Tolerance ± 20% at 120Hz, 20˚C Leakage Current After 2 minutes' application of rated voltage at 20°C, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20˚C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.21 16 0.18 25 0.15 35 0.13 50 0.12 Measurement frequency : 120 Hz Stability at Low Temperature Rated voltage (V) Z– 25˚C / Z+20˚C Impedance ratio Z– 40˚C / Z+20˚C ZT / Z20 (MAX.) 6.3 3 6 10 2 5 25 2 3 35 2 3 50 2 3 Within ±25% of the initial capacitance value (16Vor less) Within ±20% of the initial capacitance value (25Vor more) 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 105°C. Endurance 16 2 4 tan δ Leakage current After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with white color letter on black sleeve. Shelf Life Marking Type numbering system (Example : 10V 33μF) Radial Lead Type φd Sleeve (P.E.T.) φd 1 2 3 4 5 6 7 8 9 10 11 U D 11 D 1 S 2 T 3 1 4 A 5 3 6 3 7 0 8 M 9 10 US T 1 A 3 3 0 M D D Configuration P±0.5 P±0.5 φD+0.5MAX φD+0.5MAX Sleeve (P.E.T.) L+1MAX L+1MAX 15MIN Rated capacitance (33µF) Capacitance tolerance (±20%) voltage(33µF) (10V) RatedRated capacitance (mm) 4MIN 15MIN Capacitance tolerance (±20%) Configuration 4MIN φD 4 5 6.3 8 P φD φd P 1.5 4 0.45 1.5 2.0 5 0.45 2.0 2.5 6.3 0.45 2.5 3.5 8 0.5 3.5 φd 0.45 0.45 0.45 0.5 Series (10V) name Rated voltage (mm) Type Series name Configuration Type Pb-free leadwire φD Configuration Pb-free PET sleeve Pb-free leadwire 4φtoD 8 DD Pb-free PET sleeve 4 to 8 Dimensions V Cap.(μF) Code 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 6.3 0J 4×7 5×7 5×7 6.3 × 7 8×7 10 1A 34 42 50 77 130 5×7 5×7 6.3 × 7 8×7 8×7 16 1C 38 47 59 96 140 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 25 1E 29 44 57 68 107 5×7 6.3 × 7 6.3 × 7 8×7 35 1V 33 51 63 78 4×7 5×7 6.3 × 7 8×7 50 1H 24 36 57 72 4×7 4×7 4×7 4×7 4×7 4×7 4×7 5×7 6.3 × 7 8×7 Case size φ D × L (mm) 1.0 2.3 3.5 5.0 10 19 24 29 44 65 Rated ripple Rated ripple current 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 4×7 5×7 6.3 × 7 6.3 × 7 8×7 DD 10 kHz or more 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100D