ALUMINUM ELECTROLYTIC CAPACITORS CY Miniature Sized, High Ripple Current, High Reliability series CS High ripple current and Long Life product withstanding load life of 8000 to 10000 hours at +105°C. Suited for ballast application. Adapted to the RoHS directive (2002/95/EC). Smaller CY Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C Rated Voltage Range 160 to 400V Rated Capacitance Range 6.8 to 560µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.04CV+100 (µA) Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 160 0.20 200 0.20 250 0.20 350 0.24 400 0.24 Measurement frequency : 120Hz Rated voltage (V) Stability at Low Temperature Impedance ratio ZT / Z20 (MAX.) Z–25°C / Z+20°C Z–40°C / Z+20°C 160 3 6 200 3 6 250 3 6 350 5 6 400 5 6 Endurance After an application of D.C. bias voltage plus the rated ripple current for 10000 hours (8000 hours for φD =10) at 105°C the peak voltage shall not exceed the rated D.C. voltage, capacitors meet the characteristic requirements listed at right. Shelf Life After storing the capacitors under no load at 105˚C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with white color letter on dark brown sleeve. Capacitance change tan δ Leakage current Within ±20% of initial value 200% or less of initial specified value Initial specified value or less Type numbering system (Example : 250V 100µF) Radial Lead Type 1 φd Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 U CY 2 E 1 0 1 M HD T Size code Capacitance tolerance (±20%) P ± 0.5 φD+0.5MAX. Configuration Rated Capacitance (100µF) Rated voltage (250V) Series name Pressure relief vent L + 1.5 MAX. 15 MIN Type 4 MIN Configuration φD (mm) φD 10 12.5 16 18 P 5.0 5.0 7.5 7.5 φd 0.6 0.6 0.8 0.8 Pb-free leadwire Pb-free PET sleeve 10 PD 12.5 to 18 HD In case L > 25 for the φ12.5 dia. unit, lead dia. φ d = 0.8mm. • Please refer to page 20 about the end seal configulation. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100W ALUMINUM ELECTROLYTIC CAPACITORS CY series Dimensions Cap V 160 200 250 350 Code 2C 2D 2E 2V 400 2G 6R8 10 × 16 140 10 100 10 × 16 150 12 120 10 × 16 160 10 × 20 175 15 150 10 × 20 180 10 × 20 180 18 180 10 × 20 215 10 × 25 235 10 × 25 255 12.5 × 20 325 10 × 31.5 275 6.8 22 220 10 × 16 225 10 × 16 225 27 270 10 × 16 235 10 × 20 255 305 12.5 × 20 360 10 × 20 305 12.5 × 20 380 12.5 × 25 385 12.5 × 20 400 16 × 20 450 16 × 20 450 10 × 31.5 33 330 10 × 16 260 10 × 20 305 39 390 10 × 16 295 10 × 20 325 10 × 25 345 12.5 × 25 455 12.5 × 31.5 465 10 × 20 360 10 × 31.5 405 12.5 × 25 510 16 × 20 520 12.5 × 20 490 490 16 × 20 540 18 × 20 590 12.5 × 31.5 590 12.5 × 35.5 630 18 × 20 600 16 × 25 585 12.5 × 40 720 18 × 25 735 16 × 31.5 805 18 × 25 765 47 56 470 560 10 × 20 10 × 20 10 × 25 68 680 12.5 × 20 10 × 31.5 82 100 120 820 101 121 180 220 270 330 390 151 181 221 271 331 391 380 455 415 10 × 31.5 485 12.5 × 20 12.5 × 25 515 615 12.5 × 20 650 16 × 20 650 534 12.5 × 25 645 12.5 × 31.5 715 640 12.5 × 20 645 12.5 × 25 10 × 25 12.5 × 20 590 12.5 × 20 12.5 × 31.5 150 375 760 905 16 × 20 945 16 × 31.5 740 18 × 25 765 12.5 × 40 785 16 × 31.5 825 850 18 × 25 16 × 35.5 785 790 875 16 × 20 775 16 × 25 845 16 × 35.5 18 × 31.5 925 12.5 × 31.5 810 18 × 31.5 940 18 × 31.5 940 12.5 × 35.5 965 18 × 20 910 18 × 35.5 1080 18 × 40 1030 16 × 25 945 18 × 40 1205 18 × 46 1110 18 × 20 815 12.5 × 40 890 18 × 25 970 16 × 31.5 1110 1035 18 × 25 1050 12.5 × 40 1200 16 × 31.5 1230 18 × 20 1105 1185 1295 1185 18 × 25 16 × 40 16 × 25 18 × 25 1235 16 × 35.5 1400 18 × 31.5 1410 18 × 35.5 1450 16 × 31.5 1510 16 × 40 1595 18 × 25 1445 18 × 31.5 1560 18 × 46 1600 16 × 40 1730 18 × 31.5 1695 18 × 40 1780 2130 700 715 1090 1920 16 × 25 16 × 20 16 × 25 18 × 40 660 12.5 × 35.5 12.5 × 40 18 × 35.5 18 × 20 710 16 × 20 1050 561 695 695 12.5 × 25 1000 471 12.5 × 35.5 690 690 16 × 20 560 565 16 × 20 16 × 20 12.5 × 35.5 470 16 × 20 Case size φD × L (mm) : Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency 50Hz 120Hz 1kHz 10kHz 100kHz to more Coefficient 0.80 1.00 1.60 1.80 2.00 : In this case, 6 will be put at 12th digit of type numbering system. : In this case, 3 will be put at 12th digit of type numbering system. CAT.8100W