ALUMINUM ELECTROLYTIC CAPACITORS MV 5mmL, Long Life Assurance series Extended load life of 5000 hours at +105°C, with 5mm height. Compliant to the RoHS directive (2002/95/EC). SV Smaller MV Long Life MT MF Specifications Item Performance Characteristics Category Temperature Range – 40 to +105°C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 100µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C Tangent of loss angle (tan δ) 4 0.37 Rated voltage (V) tan δ (MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 4 8 14 6.3 4 10 The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 5000 hours at 105°C. Endurance 10 3 7 16 2 5 25 2 3 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Within ± 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 105°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Printed with silver color letter on dark brown sleeve. Shelf Life Marking Type numbering system (Example : 25V 10µF) Radial Lead Type 1 φd 2 3 4 5 6 7 8 9 10 11 UMV 1 E 1 0 0 M F D Configuration P ±0.5 φ D+0.5 MAX. Sleeve (P.E.T.) Capacitance tolerance (± 20%) Rated capacitance (10µF) (mm) φD L+1MAX. 15 MIN 4 MIN Rated voltage (25V) 4 5 6.3 1.5 2.0 2.5 0.45 0.45 0.45 P φd Series name Type Configuration φD 4 to 6.3 Pb-free leadwire Pb-free PET sleeve FD Dimensions Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 4 0G V Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 4×5 5×5 5×5 6.3 × 5 6.3 0J 22 30 36 60 4×5 5×5 5×5 6.3 × 5 10 1A 22 30 36 60 5×5 5×5 6.3 × 5 16 1C 27 35 46 4×5 5×5 6.3 × 5 6.3 × 5 25 1E 18 30 40 50 4×5 5×5 6.3 × 5 6.3 × 5 35 1V 13 23 38 48 4×5 5×5 6.3 × 5 50 1H 15 25 42 4×5 4×5 4×5 4×5 4×5 4×5 4×5 5×5 6.3 × 5 01.0 02.6 03.2 03.8 06.2 11.0 14.0 19.0 30.0 Case size φ D ×L (mm) Rated ripple Rated ripple current (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. CAT.8100Z