BAS116LT1 Preferred Device Switching Diode • • • • This switching diode has the following features: Low Leakage Current Applications Medium Speed Switching Times Available in 8 mm Tape and Reel Use BAS116LT1 to order the 7 inch/3,000 unit reel Pb−Free Package is Available http://onsemi.com MAXIMUM RATINGS Rating 1 ANODE 3 CATHODE Symbol Value Unit Continuous Reverse Voltage VR 75 Vdc Peak Forward Current IF 200 mAdc IFM(surge) 500 mAdc MARKING DIAGRAM Characteristic Symbol Max Unit JV M Total Device Dissipation FR−5 Board (Note 1) TA = 25°C Derate above 25°C PD 225 mW 1.8 mW/°C Thermal Resistance, Junction−to−Ambient RJA 556 °C/W PD 300 mW 2.4 mW/°C RJA 417 °C/W TJ, Tstg −55 to +150 °C Peak Forward Surge Current THERMAL CHARACTERISTICS Total Device Dissipation Alumina Substrate (Note 2) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. FR−5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. SOT−23 (TO−236) CASE 318 STYLE 8 JV = Specific Device Code M = Date Code ORDERING INFORMATION Device BAS116LT1 BAS116LT1G Package Shipping† SOT−23 3000 / Tape & Reel SOT−23 (Pb−Free) 3000 / Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2004 April, 2004 − Rev. 4 1 Publication Order Number: Devicenumber/D BAS116LT1 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR) 75 − Vdc Reverse Voltage Leakage Current (VR = 75 Vdc) Reverse Voltage Leakage Current (VR = 75 Vdc, TJ = 150°C) IR − − 5.0 80 nAdc Forward Voltage (IF = 1.0 mAdc) Forward Voltage (IF = 10 mAdc) Forward Voltage (IF = 50 mAdc) Forward Voltage (IF = 150 mAdc) VF − − − − 900 1000 1100 1250 mV Diode Capacitance (VR = 0 V, f = 1.0 MHz) CD − 2.0 pF Reverse Recovery Time (IF = IR = 10 mAdc) (Figure 1) trr − 3.0 s OFF CHARACTERISTICS Reverse Breakdown Voltage (IBR = 100 Adc) 820 +10 V 2.0 k 100 H tr 0.1 F IF tp t IF trr 10% t 0.1 F 90% DUT 50 INPUT SAMPLING OSCILLOSCOPE 50 Output Pulse Generator 1. 2. 3. VR iR(REC) = 1.0 mA IR INPUT SIGNAL OUTPUT PULSE (IF = IR = 10 mA; MEASURED at iR(REC) = 1.0 mA) A 2.0 k variable resistor adjusted for a Forward Current (IF) of 10 mA. Input pulse is adjusted so IR(peak) is equal to 10 mA. tp » trr Figure 1. Recovery Time Equivalent Test Circuit http://onsemi.com 2 BAS116LT1 PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AH NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. 318−03 AND −07 OBSOLETE, NEW STANDARD 318−08. A L 3 1 V B S 2 DIM A B C D G H J K L S V G C D H K J INCHES MIN MAX 0.1102 0.1197 0.0472 0.0551 0.0350 0.0440 0.0150 0.0200 0.0701 0.0807 0.0005 0.0040 0.0034 0.0070 0.0140 0.0285 0.0350 0.0401 0.0830 0.1039 0.0177 0.0236 MILLIMETERS MIN MAX 2.80 3.04 1.20 1.40 0.89 1.11 0.37 0.50 1.78 2.04 0.013 0.100 0.085 0.177 0.35 0.69 0.89 1.02 2.10 2.64 0.45 0.60 STYLE 8: PIN 1. ANODE 2. NO CONNECTION 3. CATHODE SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 0.8 0.031 SCALE 10:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 3 BAS116LT1 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. BAS116LT1/D