SDR2UF1.8 and SMS SDR2UF2.0 and SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 2 AMPS 1800 - 2000 VOLTS 70 nsec ULTRA FAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SDR2UF ___ ___ ____ │ │ │ │ │ │ │ │ │ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Package Type ___ = Axial SMS = Surface Mount Square Tab Voltage/Family 1.8 = 1800V 2 = 2000V │ │ │ │ │ └ └ FEATURES: • • • • • • • • • • Ultra Fast Recovery: 70 nsec maximum PIV to 2400 Volts Low Reverse Leakage Current Hermetically Sealed Low Thermal Resistance Low trr Change at High Temperature (typical: trr = 120ns @ 100°C) 2/ TX, TXV, and Space Level Screening Available Fast Recovery Versions Available. Contact Factory. Single Junction Construction Replaces 1N6512 and 1N6513 in many applications. MAXIMUM RATINGS Symbol Value Units VRRM VRWM VR 1800 2000 Volts IO 2 Amps Peak Surge Current (8.3 ms Pulse, Half Sine Wave, Superimposed on IO, Allow Junction to Reach Equilibrium between Pulses, TA=25oC) IFSM 30 Amps Operating Storage TOP Tstg -65 to +175 -65 to +200 RθJL RθJE 6 4 Reverse Voltage SDR2UF1.8 & SMS SDR2UF2.0 & SMS Average Rectified Forward Current (Resistive Load, 60 Hz, Sine Wave, TA=25oC) Temperature Range Maximum Thermal Resistance Junction to Lead, L = 0.125” (Axial Lead) Junction to End Tab (Surface Mount) NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flow Available on Request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial DATA SHEET #: RC0063E o C o C/W Surface Mount Square Tab (SMS) DOC SDR2UF1.8 and SMS SDR2UF2.0 and SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS Symbol Min Max Unit SDR2UF1.8 & SMS SDR2UF2.0 & SMS BVR –– –– 1800 2000 Volts Instantaneous Forward Voltage Drop (TA = 25oC, 300 – 500 μsec Pulse) IF1 =1 A IF2 =2 A VF1 VF2 –– –– 3.60 4.20 Instantaneous Forward Voltage Drop (TA = -55oC, 300 – 500 μsec Pulse) IF3 =1 A IF4 =2 A VF3 VF4 –– –– 3.80 4.60 TA = 25oC TA = 100oC IR1 IR2 –– –– 1.5 200 μA μA CJ –– 20 pF trr –– 70 ns DIM MIN MAX A B C D –– 0.240” 0.045” 1.00” 0.170” 0.270” 0.051” –– DIM MIN MAX A B C D 0.195” 0.290” 0.020” 0.002” 0.205” 0.330” 0.030” –– Breakdown Voltage (IR = 50 μA, TA = 25oC, 300μsec minimum Pulse) Reverse Leakage Current (VR =85% rated VR, 300μsec minimum Pulse) Junction Capacitance (VR = 50 VDC, TA = 25oC, f = 1 MHz) Reverse Recovery Time (IF =500 mA, IR =1 A, IRR =250 mA, TA = 25oC) Case Outline: (Axial) Case Outline: (SMS) NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0063E Volts Volts Volts Volts DOC