2STF2360 2STN2360 Low voltage fast-switching PNP power transistors Features ■ Very low collector-emitter satuaration voltage ■ High current gain characteristic ■ Fast-switching speed ■ In Complance with the 2002/93/EC European Directive ■ Surface mounting devices in medium power SOT-223 and SOT-89 packages ■ 2 1 Available in tape & reel packing Emergency lighting ■ Led ■ CCFL drivers (back lighting) ■ Voltage regulation ■ Relay driver 3 SOT-223 Applications ■ 2 SOT-89 Internal Schematic Diagram Description The 2STF2360 and 2STN2360 are PNP transistors manufactured using new “PB-HDC” (Power Bipolar High Density Current) technology. The resulting transistor shows exceptional high gain performances coupled with very low saturation voltage. Order Codes Part Number Marking Package Packaging 2STF2360 2STN2360 2360 N2360 SOT-89 SOT-223 Tape & Reel Tape & Reel March 2007 Rev.2 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. 1/9 www.st.com 9 2STF2360 - 2STN2360 1 Absolute Maximum Ratings 1 Absolute Maximum Ratings Table 1. Absolute Maximum Rating Symbol Parameter Unit 2STF2360 2STN2360 SOT-89 SOT-223 VCBO Collector-Base Voltage (IE = 0) -60 V VCEO Collector-Emitter Voltage (IB = 0) -60 V VEBO Emitter-Base Voltage -6 V Collector Current -3 A Collector Peak Current (tP < 5ms) -5 A Base Current -0.2 A Base Peak Current (tP < 5ms) -0.4 A IC ICM IB IBM (IC = 0) PTOT Total dissipation at Tamb = 25°C Tstg Storage Temperature TJ 1.6 W -65 to 150 °C 150 °C Thermal Data Symbol Parameter RthJ-amb # Note: 1.4 Max. Operating Junction Temperature Table 2. 2/9 Value Thermal Resistance Junction-Ambient ______ ______Max # Device mounted on a PCB area of 1 cm 2. SOT-89 SOT-223 89 78 °C/W 2STF2360 - 2STN2360 2 2 Electrical Characteristics Electrical Characteristics Electrical Characteristics (TCASE = 25°C; unless otherwise specified) Table 3. Symbol Parameter Test Conditions ICBO Collector Cut-off Current (IE = 0) IEBO Emitter Cut-off Current (IC = 0) VEB = -6V VBE(on) Base-Emitter Voltage VCE = -2V VCE(sat) Collector-Emitter Saturation Voltage Note: 1 VBE(sat) Note: 1 hFE tr ts tf fT IC = -100mA IC = -2A _ _ IB = -100mA __ IB = -150mA Base-Emitter Saturation Voltage IC = -2A _ IB = -100mA DC Current Gain IC = -100mA_ VCE = -2V IC = -1A _ VCE = -2V RESISTIVE LOAD Delay Time Rise Time Storage Time Fall Time Transition Frequency Typ. Max. Unit -100 nA -100 nA -670 -730 mV -250 -350 -320 -500 mV mV -0.89 -1.2 V 280 400 VCB = -60V IC = -3A Note: 1 td Min. IC = -3A -630 80 160 10 15 ns 75 100 ns 250 350 ns 35 50 ns VCC = -10V IC = -0.1A ___ V CE =-10V 130 MHz Note: 1 Pulsed duration = 300 µs, duty cycle ≤1.5%. 2.1 Typical Characteristics (curves) Figure 1. DC Current Gain Figure 2. DC Current Gain 3/9 2STF2360 - 2STN2360 2 Electrical Characteristics Figure 3. Collector Emitter Saturation Voltage Figure 4. Base Emitter Saturation Voltage Figure 5. Resistive Load Switching Times Resistive LoadSwitching Times Figure 7. Capacitance 4/9 Figure 6. 2STF2360 - 2STN2360 3 3 Package Mechanical Data Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 5/9 2STF2360 - 2STN2360 3 Package Mechanical Data SOT-89 MECHANICAL DATA mm DIM. MIN. TYP. mils MAX. MIN. TYP. MAX. A 1.4 1.6 55.1 63.0 B 0.44 0.56 17.3 22.0 B1 0.36 0.48 14.2 18.9 C 0.35 0.44 13.8 17.3 C1 0.35 0.44 13.8 17.3 D 4.4 4.6 173.2 181.1 D1 1.62 1.83 63.8 72.0 E 2.29 2.6 90.2 102.4 e 1.42 1.57 55.9 61.8 e1 2.92 3.07 115.0 120.9 H 3.94 4.25 155.1 167.3 L 0.89 1.2 35.0 47.2 P025H 6/9 2STF2360 - 2STN2360 3 Package Mechanical Data SOT-223 MECHANICAL DATA mm DIM. MIN. TYP. A inch MAX. MIN. TYP. 1.80 MAX. 0.071 B 0.60 0.70 0.80 0.024 0.027 0.031 B1 2.90 3.00 3.10 0.114 0.118 0.122 c 0.24 0.26 0.32 0.009 0.010 0.013 D 6.30 6.50 6.70 0.248 0.256 0.264 e 2.30 0.090 e1 4.60 0.181 E 3.30 3.50 3.70 0.130 0.138 0.146 H 6.70 7.00 7.30 0.264 0.276 0.287 V A1 10 o 10o 0.02 P008B 7/9 2STF2360 - 2STN2360 4 Revision History 4 8/9 Revision History Date Revision Changes 13-Sep-2006 1 Initial Release 02-Mar-2007 2 New graphics have been added 2STF2360 - 2STN2360 4 Revision History Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. ©2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9