BUL49D BULB49D High voltage fast-switching NPN power transistors Features ■ High voltage capability ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed ■ High ruggedness 3 3 1 2 1 2 TO-220FP TO-220 Applications 3 ■ ■ 1 Electronic transformers for halogen lamps Flyback and forward single transistor low power converters Description 3 12 I2PAK D2PAK Figure 1. Internal schematic diagram The devices are manufactured using high voltage multi-epitaxial planar technology for high switching speeds and high voltage capability. The devices are designed for use in electronic transformer for halogen lamps. Table 1. Device summary Order code Marking Package Packaging BUL49D BUL49D TO-220 Tube BUL49DFP BUL49DFP TO-220FP Tube BULB49D-1 BULB49D I2PAK Tube BULB49DT4 BULB49D D2PAK Tape and reel June 2008 Rev 3 1/15 www.st.com 15 Contents BUL49D - BULB49D Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 Packaging information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 BUL49D - BULB49D 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol D2PAK Parameter Unit TO-220FP I2PAK TO-220 VCES Collector-emitter voltage (VBE =0) 850 V VCEO Collector-emitter voltage (IB =0) 450 V VEBO Emitter-base voltage (IC =0, IB <2 A, tP < 10 ms) V(BR)EBO V Collector current 5 A Collector peak current (tP < 5ms) 10 A Base current 2 A IBM Base peak current (tP < 5 ms) 4 A Ptot Total dissipation at Tc ≤25°C Tstg Storage temperature IC ICM IB TJ Table 3. 80 Max. operating junction temperature 34 W -65 to 150 °C 150 °C Thermal data D2PAK Symbol Parameter I2PAK TO-220FP Unit 3.67 62.5 °C/W °C/W TO-220 Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient __max __max 1.56 62.5 3/15 Electrical characteristics 2 BUL49D - BULB49D Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Electrical characteristics Symbol Parameter Test conditions Collector cut-off current (VBE =0) IEBO Emitter cut-off current (IC =0) VEB = 9 V Emitter-base brakdown voltage (IC = 0) IE =10 mA 10 Collector-emitter VCEO(sus)(1) sustaining voltage (I = 0) IC =10 mA B 450 VCE(sat) (1) VBE(sat) (1) hFE (1) VCEW ts tf ts tf VF (1) Collector-emitter saturation voltage Base-emitter saturation voltage DC current gain Maximum collectoremitter voltage without snubber Resistive load Storage time Fall time Inductive load Storage time Fall time VCE = 850 V Tc = 125 °C IC =1 A _ IC =2 A _ _ IB =0.4 A IC =4 A __ _ IB =0.8 A _ IB =0.2 A IC =1 A _ _ IB =0.2 A IC =4 A _ _ IB =0.8 A IC =10 mA VCE =5 V IC =500 mA VCE =5 V IC =7 A VCE =10 V IC =8 A VBB= -2.5 V L =50 µH RBB =0 Max. Unit 100 500 µA µA 100 µA 18 V V 0.1 0.3 0.6 1.2 V V V 1 1.3 V V 10 60 4 10 450 V tp =10 µs VCC =250 V IC =2 A IB1=-IB2 =400 mA 2 (see Figure 12) VCL =300 V IB(on) =800 mA VBE(off) =-5 V (see Figure 13) Diode forward voltage Typ. VCE = 850 V ICES V(BR)EBO IC = 3 A 1. Pulsed duration = 300 ms, duty cycle ≤1.5% 4/15 Min. 3 µs 0.8 µs IC =4 A RBB(off) =0 L =1 mH 0.6 1.3 µs 50 100 ns 1.5 V BUL49D - BULB49D 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Safe operating area (for TO-220 - D2PAK - I2PAK) Figure 3. Safe operating area (for TO-220FP) Figure 4. Derating curves Figure 5. Output characteristics Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage 5/15 Electrical characteristics Figure 8. DC current gain Figure 10. Inductive load storage time Figure 12. Reverse biased safe operating area 6/15 BUL49D - BULB49D Figure 9. DC current gain Figure 11. Inductive load fall time BUL49D - BULB49D 2.2 Electrical characteristics Test circuits Figure 13. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor Figure 14. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 7/15 Package mechanical data 3 BUL49D - BULB49D Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/15 BUL49D - BULB49D Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 9/15 Package mechanical data BUL49D - BULB49D TO-220FP mechanical data mm. Dim. Min. A 4.40 inch Typ Max. Min. 4.60 0.173 Typ. 0.181 Max. B 2.5 2.7 0.098 0.106 D 2.5 2.75 0.098 0.108 E 0.45 0.70 0.017 0.027 F 0.75 1.00 0.030 0.039 F1 1.15 1.50 0.045 0.067 F2 1.15 1.50 0.045 0.067 G 4.95 5.20 0.195 0.204 G1 2.40 2.70 0.094 0.106 H 10 10.40 0.393 L2 16 0.409 0.630 28.6 30.6 1.126 L4 9.80 10.60 0.385 1.204 0.417 L5 2.9 3.6 0.114 0.141 L6 15.90 16.40 0.626 0.645 L7 9 9.30 0.354 0.366 Dia 3 3.2 0.118 0.126 B D A E L3 L3 L6 F2 H G G1 Dia F F1 L7 L2 L5 1 2 3 L4 7012510-I 10/15 BUL49D - BULB49D Package mechanical data I²PAK (TO-262) mechanical data mm inch Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max Min 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 11/15 Package mechanical data BUL49D - BULB49D D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.4 0° 0079457_M 12/15 Typ 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° BUL49D - BULB49D 4 Packaging information Packaging information D 2 PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B DIM. mm inch MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 0.449 0.456 MIN. 330 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA inch MAX. MAX. 12.992 0.059 13.2 0.504 0.520 26.4 0.960 1.039 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 MAX. F 11.4 11.6 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 R 50 0.075 0.082 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 0.933 0.956 13/15 Revision history 5 BUL49D - BULB49D Revision history Table 5. 14/15 Document revision history Date Revision Changes 10-Sep-2003 1 First release. 04-May-2007 2 The document has been reformatted. 09-Jun-2008 3 Inserted devices in: D2PAK and I2PAK. BUL49D - BULB49D Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15