HCF4094B 8 STAGE SHIFT AND STORE BUS REGISTER WITH 3-STATE OUTPUTS ■ ■ ■ ■ ■ ■ ■ ■ 3-STATE PARALLEL OUTPUTS FOR CONNECTION TO COMMON BUS SEPARATE SERIAL OUTPUTS SYNCHRONOUS TO BOTH POSITIVE AND NEGATIVE CLOCK EDGES FOR CASCADING MEDIUM SPEED OPERATION 5MHz at 10V QUIESCENT CURRENT SPECIFIED UP TO 20V STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS 5V, 10V AND 15V PARAMETRIC RATINGS INPUT LEAKAGE CURRENT II = 100nA (MAX) AT VDD = 18V TA = 25°C 100% TESTED FOR QUIESCENT CURRENT DESCRIPTION The HCF4094B is a monolithic integrated circuit fabricated in Metal Oxide Semiconductor technology available in DIP and SOP packages. The HCF4094B is an 8 stages serial shift register having a storage latch associated with each stage for strobing data from the serial input to parallel buffered 3-state outputs. The parallel outputs may be connected directly to common bus lines. Data is shifted on positive clock transition. The data in each shift register stage is transferred to the DIP SOP ORDER CODES PACKAGE TUBE T&R DIP SOP HCF4094BEY HCF4094BM1 HCF4094M013TR storage register when the STROBE input is high. Data in the storage register appears at the outputs whenever the OUTPUT-ENABLE signal is high. Two serial outputs are available for cascading a number of HCF4094B devices. Data is available at the QS serial output terminal on positive clock edges to allow for high speed operation in cascaded system in which the clock rise time is fast. The same serial information, available at the Q’S terminal on the next negative clock edge, provides a means for cascading HCF4094B devices when the clock rise time is slow. PIN CONNECTION March 2004 1/13 HCF4094B IINPUT EQUIVALENT CIRCUIT PIN DESCRIPTION PIN N° SYMBOL 2 1 3 DATA STROBE CLOCK QS, Q’S Data Input Strobe Input Clock Input Q1 to Q8 Parallel Outputs 9, 10 4, 5, 6, 7, 14, 13, 12, 11 NAME AND FUNCTION Serial Outputs 8 OUTPUT ENABLE VSS Negative Supply Voltage 16 VDD Positive Supply Voltage 15 Output Enable Input FUNCTIONAL DIAGRAM TRUTH TABLE CLOCK PARALLEL OUTPUTS OUTPUTS ENABLE STROBE L X L SERIAL OUTPUTS DATA Q1 Qn Q*S Q’S X OC OC Q7 No Change X X OC OC No Change Q7 H L X No Change No Change Q7 No Change H H L L Qn - 1 Q7 No Change H H H H Qn - 1 Q7 No Change H H H No Change No Change No Change Q7 X : Don’t Care OC : Open Circuit * At the positive clock edge information on the 7th shift register stage is transferred to the 8th register stage and the QS output. 2/13 HCF4094B LOGIC DIAGRAM TIMING CHART 3/13 HCF4094B ABSOLUTE MAXIMUM RATINGS Symbol VDD Parameter Supply Voltage VI DC Input Voltage II DC Input Current PD Value Unit -0.5 to +22 V -0.5 to VDD + 0.5 ± 10 V mA 500 (*) 100 mW mW Top Power Dissipation per Package Power Dissipation per Output Transistor Operating Temperature -55 to +125 °C Tstg Storage Temperature -65 to +150 °C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. All voltage values are referred to VSS pin voltage. (*) 500mW at 65 °C; derate to 300mW by 10mW/°C from 65°C to 85°C RECOMMENDED OPERATING CONDITIONS Symbol VDD 4/13 Parameter Supply Voltage VI Input Voltage Top Operating Temperature Value Unit 3 to 20 V 0 to VDD V -55 to 125 °C HCF4094B DC SPECIFICATIONS Test Condition Symbol IL VOH VOL VIH VIL IOH IOL II Parameter Quiescent Current High Level Output Voltage Low Level Output Voltage VI (V) 0/5 0/10 0/15 0/20 0/5 0/10 0/15 5/0 10/0 15/0 High Level Input Voltage Low Level Input Voltage Output Drive Current Output Sink Current Input Leakage Current IOH, IOL 3-State Output Leakage Current Input Capacitance CI VO (V) 0/5 0/5 0/10 0/15 0/5 0/10 0/15 0.5/4.5 1/9 1.5/13.5 4.5/0.5 9/1 13.5/1.5 2.5 4.6 9.5 13.5 0.4 0.5 1.5 Value |IO| VDD (µA) (V) <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 <1 5 10 15 20 5 10 15 5 10 15 5 10 15 5 10 15 5 5 10 15 5 10 15 TA = 25°C Min. Typ. Max. 0.04 0.04 0.04 0.08 5 10 20 100 4.95 9.95 14.95 -40 to 85°C -55 to 125°C Min. Min. 150 300 600 3000 4.95 9.95 14.95 0.05 0.05 0.05 4.95 9.95 14.95 3.5 7 11 1.5 3 4 -3.2 -1 -2.6 -6.8 1 2.6 6.8 Max. 150 300 600 3000 0.05 0.05 0.05 3.5 7 11 -1.36 -0.44 -1.1 -3.0 0.44 1.1 3.0 Max. 3.5 7 11 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 µA V 0.05 0.05 0.05 1.5 3 4 Unit V V 1.5 3 4 -1.1 -0.36 -0.9 -2.4 0.36 0.9 2.4 V mA mA 0/18 Any Input 18 ±10-5 ± 0.1 ±1 ±1 µA 0/18 0/18 18 ±10-4 ± 0.4 ± 12 ± 12 µA Any Input 5 7.5 pF The Noise Margin for both "1" and "0" level is: 1V min. with VDD=5V, 2V min. with VDD=10V, 2.5V min. with VDD=15V 5/13 HCF4094B DYNAMIC ELECTRICAL CHARACTERISTICS (Tamb = 25°C, CL = 50pF, RL = 200KΩ, tr = tf = 20 ns) Test Condition Symbol VDD (V) tPLH tPHL Propagation Delay Time (Clock to serial Output QS) tPLH tPHL Propagation Delay Time (Clock to serial Output Q’S) tPLH tPHL Propagation Delay Time (Clock to Parallel Output) tPLH tPHL Propagation Delay Time (Strobe to Parallel Output) tPZL, tPZH Propagation Delay Time Output Enable to Parallel Out: Output High to High Impedance tPHZ tPLZ Propagation Delay Time Output Enable to Parallel Out: Output Low to High Impedance tW tW tsetup thold Strobe Pulse Width Clock Pulse Width Data Setup Time Minimum Hold Time tTLH tTHL Transition Time tr, tf fmax Unit Clock input Rise or Fall Time Maximum Clock Input Frequency Typ. Max. 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 300 125 95 230 110 75 420 195 135 290 145 100 140 75 55 600 250 190 460 220 150 840 390 270 580 290 200 280 150 110 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 5 10 15 225 95 70 100 40 35 100 50 40 60 30 20 0 0 0 100 50 40 450 190 140 (*) Typical temperature coefficient for all VDD value is 0.3%/°C. 6/13 Value (*) Parameter Min. 200 80 70 200 100 83 125 55 35 0 0 0 15 5 5 1.25 2.5 3 ns ns ns ns ns ns ns ns ns 0 0 0 200 100 80 ns ns µs 2.5 5 6 MHz HCF4094B TYPICAL APPLICATION (REMOTE CONTROL HOLDING REGISTER) TEST CIRCUIT TEST SWITCH tPLH, tPHL Open tPZL, tPLZ VCC tPZH, tPHZ GND CL = 50pF or equivalent (includes jig and probe capacitance) RL = 200KΩ RT = ZOUT of pulse generator (typically 50Ω) 7/13 HCF4094B WAVEFORM 1: PROPAGATION DELAY TIMES, PULSE WIDTH (CLOCK), SETUP AND HOLD TIME (DATA IN TO CLOCK) (f=1MHz; 50% duty cycle) WAVEFORM 2: PROPAGATION DELAY TIME, PULSE WIDTH (STROBE), SETUP AND HOLD TIME (STROBE TO CLOCK) (f=1MHz; 50% duty cycle) 8/13 HCF4094B WAVEFORM 3: OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cycle) 9/13 HCF4094B Plastic DIP-16 (0.25) MECHANICAL DATA mm. inch DIM. MIN. a1 0.51 B 0.77 TYP MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 10/13 HCF4094B SO-16 MECHANICAL DATA DIM. mm. MIN. TYP A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.008 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45˚ (typ.) D 9.8 10 0.385 0.393 E 5.8 6.2 0.228 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 8 0.024 ˚ (max.) PO13H 11/13 HCF4094B Tape & Reel SO-16 MECHANICAL DATA mm. inch DIM. MIN. A MAX. MIN. 330 13.2 TYP. MAX. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 12/13 TYP 0.504 22.4 0.519 0.882 Ao 6.45 6.65 0.254 0.262 Bo 10.3 10.5 0.406 0.414 Ko 2.1 2.3 0.082 0.090 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 HCF4094B Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners © 2004 STMicroelectronics - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 13/13