STGW19NC60WD STGP19NC60WD N-channel 600V - 19A - TO-220 - TO-247 Ultra fast PowerMESH™ IGBT Features VCE(sat) IC @100°C (max)@25°C Type VCES STGP19NC60WD 600V < 2.5V 22A STGW19NC60WD 600V < 2.5V 23A 3 ■ High frequency operation ■ Low CRES / CIES ratio (no cross-conduction susceptibility) ■ Very soft ultra fast recovery antiparallel diode 1 TO-220 2 TO-247 Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix “W” identifies a family optimized for very high frequency application. Internal schematic diagram Applications ■ High frequency motor controls, inverters, UPS ■ HF, SMPS and PFC in both hard switch and resonant topologies Order code Part number Marking Package Packaging STGP19NC60WD GP19NC60WD TO-220 Tube STGW19NC60WD GW19NC60WD TO-247 Tube May 2007 Rev 3 1/15 www.st.com 15 Contents STGP19NC60WD - STGW19NC60WD Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 7 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 STGP19NC60WD - STGW19NC60WD 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter Unit TO-220 TO-247 VCES Collector-emitter voltage (VGS = 0) IC(1) Collector current (continuous) at TC = 25°C 40 42 A IC(1) Collector current (continuous) at TC = 100°C 22 23 A ICL (2) 600 V Collector current (pulsed) 35 A Diode RMS forward current at TC = 25°C 12 A VGE Gate-emitter voltage ±20 V PTOT Total dissipation at TC = 25°C 125 W Tstg Storage temperature – 55 to 150 °C IF Tj Operating junction temperature 1. Calculated according to the iterative formula: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------C C R × V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp=480V, Tj=150°C, RG=10Ω, VGE=15V Table 2. Thermal resistance Value Symbol Parameter Thermal resistance junction-case max Unit TO-220 TO-247 1 0.95 °C/W 2.25 2.5 °C/W Rthj-case Thermal resistance junction-case max diode Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W 3/15 Electrical characteristics 2 STGP19NC60WD - STGW19NC60WD Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol Parameter VBR(CES) Collector-emitter breakdown voltage VCE(sat) Collector-emitter saturation VGE= 15V, IC= 12A voltage VGE= 15V, IC=12A,Tc=125°C VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA ICES Collector cut-off current (VGE = 0) VCE= Max rating,TC= 25°C IGES gfs Table 4. Symbol Cies Coes Cres Qg Qge Qgc 4/15 Static Test conditions IC= 1mA, VGE= 0 Min. Typ. Max. 600 Unit V 2.1 1.8 2.5 V V 5.75 V VCE= Max rating,TC= 125°C 150 1 µA mA Gate-emitter leakage current (VCE = 0) VGE= ±20V, VCE= 0 ±100 nA Forward transconductance VCE = 15V, IC= 12A 3.75 10 S Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, Figure 16 Min. Typ. Max. Unit 1180 130 26 pF pF pF 53 10 21 nC nC nC STGP19NC60WD - STGW19NC60WD Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Table 6. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Electrical characteristics Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions Min. VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Figure 17 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Tj = 125°C Figure 17 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Figure 17 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Tj = 125°C Figure 17 Typ. Max. Unit 25 7 1600 ns ns A/µs 25 8 1400 ns ns A/µs 22 90 43 ns ns ns 47 127 77 ns ns ns Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Figure 17 VCC = 390V, IC = 12A RG= 10Ω, VGE= 15V, Tj = 125°C Figure 17 Min. Typ. Max. Unit 81 125 206 µJ µJ µJ 161 255 416 µJ µJ µJ 1. Eon is the turn-on losses when a typical diode is used in the test circuit in Figure 15 If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/15 Electrical characteristics Table 7. Symbol Collector-emitter diode Parameter Vf Forward on-voltage trr Reverse recovery time Reverse recovery charge Reverse recovery current Qrr Irrm trr Qrr Irrm 6/15 STGP19NC60WD - STGW19NC60WD Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions If = 12A If = 12A, Tj = 125°C If = 12A,VR = 50V, Tj = 25°C, di/dt = 100 A/µs Figure 18 If = 12A,VR = 50V, Tj =125°C, di/dt = 100A/µs Figure 18 Min. Typ. Max. Unit 1.9 1.5 2.5 V V 31 30 2 ns nC A 59 102 4 ns nC A STGP19NC60WD - STGW19NC60WD Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations 7/15 Electrical characteristics STGP19NC60WD - STGW19NC60WD Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 8/15 STGP19NC60WD - STGW19NC60WD Figure 13. Turn-off SOA Electrical characteristics Figure 14. Emitter-collector diode characteristics 9/15 Test circuit 3 STGP19NC60WD - STGW19NC60WD Test circuit Figure 15. Test circuit for inductive load switching Figure 16. Gate charge test circuit Figure 17. Switching waveform Figure 18. Diode recovery time waveform 10/15 STGP19NC60WD - STGW19NC60WD 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/15 Package mechanical data STGP19NC60WD - STGW19NC60WD TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 12/15 Typ 4.40 0.61 1.14 0.49 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 STGP19NC60WD - STGW19NC60WD Package mechanical data TO-247 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.85 5.15 0.19 0.20 A1 2.20 2.60 0.086 0.102 b 1.0 1.40 0.039 0.055 b1 2.0 2.40 0.079 0.094 0.134 b2 3.0 3.40 0.118 c 0.40 0.80 0.015 0.03 D 19.85 20.15 0.781 0.793 E 15.45 15.75 0.608 e 5.45 L 14.20 14.80 0.560 L1 3.70 4.30 0.14 L2 18.50 øP 3.55 øR 4.50 S 5.50 0.620 0.214 0.582 0.17 0.728 3.65 0.140 5.50 0.177 0.143 0.216 0.216 13/15 Revision history 5 STGP19NC60WD - STGW19NC60WD Revision history Table 8. 14/15 Revision history Date Revision Changes 04-Oct-2006 1 Initial release. 13-Apr-2007 2 Final version 08-May-2007 3 Added TO-247 STGP19NC60WD - STGW19NC60WD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 15/15