STN4NF03L N-channel 30V - 0.039Ω - 6.5A - SOT-223 STripFET™ II Power MOSFET General features ■ Type VDSS RDS(on) ID STN4NF03L 30V <0.05Ω 6.5A 2 Low threshold drive 1 Description 2 3 SOT-223 This Power Mosfet is the latest development of STMicroelectronics unique “Single Feature Size™” strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalance characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications ■ Switching application Order codes Part number Marking Package Packaging STN4NF03L N4NF03L SOT-223 Tape & reel October 2006 Rev 4 1/12 www.st.com 12 Contents STN4NF03L Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 ................................................ 8 STN4NF03L 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Parameter Value Unit 30 V VDS Drain-source voltage (VGS = 0) VGS Gate-source voltage ± 16 V ID Drain current (continuous) at TC = 25°C 6.5 A ID Drain current (continuous) at TC=100°C 4.5 A Drain current (pulsed) 26 A Total dissipation at TC = 25°C 3.3 W 0.026 W/°C IDM (1) PTOT Derating factor EAS (2) Single pulse avalanche energy 200 mJ TJ Tstg Operating junction temperature Storage temperature -55 to 150 °C 1. Pulse width limited by safe operating area 2. Starting Tj=25°C, ID= 6.5A, VDD=15V Table 2. Thermal data Rthj-pcb Thermal resistance junction-PCB(1) max 38 °C/W Rthj-pcb Thermal resistance junction-PCB(2) max 100 °C/W Maximum lead temperature for soldering purpose (for 10 sec. 1.6 mm from case) typ 260 °C Tl 1. When mounted on 1 in2 FR-4 board , 2 oz Cu, t<10s 2. Minimum recommended footprint 3/12 Electrical characteristics 2 STN4NF03L Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol V(BR)DSS On/off states Parameter Drain-source breakdown voltage Test conditions ID = 250 µA, VGS= 0 Typ. Zero gate voltage drain current (VGS = 0) IGSS Gate body leakage current (VDS = 0) VGS = ±16V VGS(th) Gate threshold voltage VDS= VGS, ID = 250µA RDS(on) Static drain-source on resistance VGS= 10V, ID= 2A Max. 30 Unit V VDS = Max rating, IDSS Table 4. Min. VDS = Max rating @125°C 1 10 µA µA ± 100 nA 1 V 0.039 0.046 VGS= 5V, ID= 2A 0.05 0.06 Ω Ω Dynamic Symbol Parameter Test conditions Min. Typ. gfs (1) Forward transconductance VDS=10V, ID=1A Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge Max. Unit 3 6 S VDS =25V, f=1 MHz, VGS=0 330 90 40 pF pF pF VDD=24V, ID = 4A VGS =10V (see Figure 13) 6.5 3.2 2 9 nC nC nC Typ. Max. Unit 1. Pulsed: pulse duration=300µs, duty cycle 1.5% Table 5. Symbol 4/12 Switching times Parameter td(on) tr Turn-on delay time rise time td(off) tf Turn-off-delay time fall time Test conditions VDD=15 V, ID=2A, RG=4.7Ω, VGS=4.5V (see Figure 14) VDD=15 V, ID=2A, RG=4.7Ω, VGS=4.5V (see Figure 14) Min. 11 100 ns ns 35 22 ns ns STN4NF03L Electrical characteristics Table 6. Symbol ISD ISDM (1) VSD(2) trr Qrr IRRM Source drain diode Parameter Test conditions Max Unit Source-drain current 6.5 A Source-drain current (pulsed) 26 A 1.5 V Forward on voltage ISD=6.5A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current di/dt = 100A/µs, VDD=15 V, Tj=150°C ISD=6.5 A, (see Figure 14) Min Typ. 34 25 1.4 ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration=300µs, duty cycle 1.5% 5/12 Electrical characteristics STN4NF03L 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance junction-PCB Figure 3. Output characterisics Figure 4. Transfer characteristics Figure 5. Transconductance Figure 6. Static drain-source on resistance 6/12 STN4NF03L Electrical characteristics Figure 7. Gate charge vs gate-source voltage Figure 8. Figure 9. Normalized gate threshold voltage vs temperature Capacitance variations Figure 10. Normalized on resistance vs temperature Figure 11. Source-drain diode forward characteristics 7/12 Test circuit 3 STN4NF03L Test circuit Figure 12. Switching times test circuit for resistive load Figure 13. Gate charge test circuit Figure 14. Test circuit for inductive load Figure 15. Unclamped Inductive load test switching and diode recovery times circuit Figure 16. Unclamped inductive waveform 8/12 Figure 17. Switching time waveform STN4NF03L 4 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/12 Package mechanical data STN4NF03L SOT-223 MECHANICAL DATA mm DIM. mils MIN. TYP. MAX. MIN. TYP. MAX. a 2.27 2.3 2.33 89.4 90.6 91.7 b 4.57 4.6 4.63 179.9 181.1 182.3 c 0.2 0.4 0.6 7.9 15.7 23.6 d 0.63 0.65 0.67 24.8 25.6 26.4 e1 1.5 1.6 1.7 59.1 63 66.9 e4 0.32 12.6 f 2.9 3 3.1 114.2 118.1 122.1 g 0.67 0.7 0.73 26.4 27.6 28.7 l1 6.7 7 7.3 263.8 275.6 287.4 l2 3.5 3.5 3.7 137.8 137.8 145.7 L 6.3 6.5 6.7 248 255.9 263.8 L e1 l2 d a c b e4 f l1 C B C E g P008B 10/12 STN4NF03L 5 Revision history Revision history Table 7. Revision history Date Revision Changes 21-Jun-2004 3 Complete document 09-Oct-2006 4 New template, no content change 11/12 STN4NF03L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12