STP5NK52ZD - STB5NK52ZD-1 STD5NK52ZD - STD5NK52ZD-1 N-channel 520V - 1.22Ω - 4.4A - TO-220 - DPAK - I2PAK - IPAK Zener-protected SuperMESH™ Power MOSFET General features Type VDSS RDS(on) ID Pw STB5NK52ZD-1 520V <1.5Ω 4.4A 70W STD5NK52ZD 520V <1.5Ω 4.4A 70W STD5NK52ZD-1 520V <1.5Ω 4.4A 70W STP5NK52ZD 520V <1.5Ω 4.4A 70W ■ 100% avalanche tested ■ Extremely high dv/dt capability 3 2 3 12 1 IPAK I²PAK 3 3 1 1 ■ Gate charge minimized ■ Very low intrinsic capacitances ■ Very good manufacturing repeatability ■ Improved ESD capability DPAK 2 TO-220 Internal schematic diagram Description The SuperFREDMesh™ series associates all advantages of reduced on-resistance, zener gate protection and very high dv/dt capability with a Fast body-drain recovery diode. Such series complements the “FDmesh™” advanced technology. Applications ■ Switching application Order codes Part number Marking Package Packaging STB5NK52ZD-1 B5NK52ZD I²PAK Tube STD5NK52ZD D5NK52ZD DPAK Tape & reel STD5NK52ZD-1 D5NK52ZD IPAK Tube STP5NK52ZD P5NK52ZD TO-220 Tube March 2006 Rev 4 1/17 www.st.com 17 Contents STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2/17 .............................................. 9 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD 1 Electrical ratings Electrical ratings Table 1. Absolute maximum ratings Symbol Value Unit Drain-source voltage (VGS = 0) 520 V Drain-gate voltage (R GS = 20 kΩ) 520 V Gate- source voltage ± 30 V ID Drain current (continuous) at TC = 25°C 4.4 A ID Drain current (continuous) at TC = 100°C 2.7 A Drain current (pulsed) 17.6 A 70 W 0.56 W/°C 2800 V 15 V/ns -55 to 150 °C VDS VDGR VGS IDM (1) PTOT Parameter Total dissipation at T C = 25°C Derating factor VESD(G-S) Gate source ESD(HBM-C=100pF, R=1.5KΩ) dv/dt (2) Tj Tstg Peak diode recovery voltage slope Operating junction temperature Storage temperature 1. Pulse width limited by safe operating area 2. ISD <4.4A, di/dt <200A/µs, VDD =80% V(BR)DSS Table 2. Thermal data TO-220/I²PAK Rthj-case Thermal resistance junction-case Max Rthj-amb Thermal resistance junction-ambient Max Tl Table 3. Symbol Maximum lead temperature for soldering purpose DPAK/IPAK 1.78 62.5 °C/W 100 300 °C/W °C Avalanche Characteristics Parameter Max value Unit IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) 4.4 A EAS Single pulse avalanche energy (starting Tj = 25°C, ID = IAR, VDD = 50V) 170 mJ 3/17 Electrical characteristics 2 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Electrical characteristics (Tcase =25°C unless otherwise specified) Table 4. Symbol V(BR)DSS On /off states Parameter Drain-source breakdown voltage Test conditions ID = 1mA, VGS = 0 IDSS VDS = Max rating Zero gate voltage drain current (VGS = 0) VDS = Max rating, TC=125°C IGSS Gate-body leakage current (VDS = 0) Gate threshold voltage VDS = VGS, ID = 50µA RDS(on Static drain-source on resistance Symbol gfs (1) Ciss Coss Crss COSS eq(1) Qg Qgs Qgd Typ. Max. Unit 520 V 1 50 µA µA ± 10 µA 3.75 4.5 V 1.22 1.5 Ω Typ. Max. Unit VGS = ± 20V VGS(th) Table 5. Min. 2.5 VGS = 10V, ID = 2.2A Dynamic Parameter Forward transconductance Test conditions Min. VDS = 15V , ID = 2.2A 3.1 S Input capacitance Output capacitance Reverse transfer capacitance VDS = 25 V, f = 1 MHz, VGS = 0 529 71 13.4 pF pF pF Equivalent output capacitance VGS = 0V, VDS = 0 to 416V 11 pF Total gate charge Gate-source charge Gate-drain charge VDD = 416V, ID = 4.4A, VGS = 10V (see Figure 16) 16.9 4.2 8.4 nC nC nC 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/17 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Table 6. Switching times Symbol Parameter td(on) tr td(off) tf Table 7. Turn-on delay time Rise time Turn-off-delay time Fall time Parameter ISD Source-drain current Source-drain current (pulsed) ISDM VSD (2) trr Qrr IRRM trr Qrr IRRM Min. Typ. Max Unit 11.4 13.6 23.1 15 VDD = 260V, ID = 2.2A, RG = 4.7Ω, V GS = 10V (see Figure 15) ns ns ns ns Source drain diode Symbol (1) Test Conditions Electrical characteristics Test Conditions Min. Typ. Max. Unit 4.4 17.6 A A 1.6 V Forward On Voltage ISD = 4.4A, V GS = 0 Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4.4A, di/dt = 100A/µs VDD = 60V, Tj = 25°C (see Figure 20) 97.7 300 5.9 ns nC A Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4.4A, di/dt = 100A/µs VDD = 60V, Tj = 150°C (see Figure 20) 139 500 7.2 ns nC A 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 % Table 8. Symbol BVGSO(1) Gate-source zener diode Parameter Gate-source breakdown voltage Test conditions Igs=± 1mA (Open Drain) Min Typ Max Unit 30 V 1. The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components 5/17 Electrical characteristics STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for TO-220 / I²PAK / D²PAK Figure 3. Safe operating area for DPAK / IPAK Figure 4. Thermal impedance for DPAK / IPAK Figure 5. Output characterisics Transfer characteristics 6/17 Figure 2. Figure 6. Thermal impedance for TO-220 / I²PAK / D²PAK STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Figure 7. Normalized BVDSS vs temperature Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 8. Electrical characteristics Static drain-source on resistance Figure 12. Normalized on resistance vs temperature 7/17 Electrical characteristics STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Figure 13. Source-drain diode forward characteristics 8/17 Figure 14. Maximum avalanche energy vs temperature STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD 3 Test circuits Test circuits Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/17 Package mechanical data 4 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/17 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Package mechanical data TO-220 MECHANICAL DATA DIM. mm. MIN. TYP inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 b 0.61 0.88 0.024 0.034 b1 1.15 1.70 0.045 0.066 c 0.49 0.70 0.019 0.027 D 15.25 15.75 0.60 0.620 E 10 10.40 0.393 0.409 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 F 1.23 1.32 0.048 0.052 H1 6.20 6.60 0.244 0.256 J1 2.40 2.72 0.094 0.107 0.551 L 13 14 0.511 L1 3.50 3.93 0.137 L20 16.40 L30 0.154 0.645 28.90 1.137 øP 3.75 3.85 0.147 0.151 Q 2.65 2.95 0.104 0.116 11/17 Package mechanical data STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD TO-251 (IPAK) MECHANICAL DATA mm DIM. MIN. inch TYP. MAX. MIN. TYP. MAX. A 2.2 2.4 0.086 0.094 A1 0.9 1.1 0.035 0.043 A3 0.7 1.3 0.027 0.051 B 0.64 0.9 0.025 0.031 B2 5.2 5.4 0.204 0.212 B3 0.85 B5 0.033 0.3 0.012 B6 0.95 C 0.45 C2 0.48 D 6 E 6.4 6.6 0.037 0.6 0.017 0.023 0.6 0.019 0.023 6.2 0.236 0.244 0.252 0.260 G 4.4 4.6 0.173 0.181 H 15.9 16.3 0.626 0.641 L 9 9.4 0.354 0.370 L1 0.8 1.2 0.031 0.047 L2 0.8 1 0.031 0.039 A1 C2 A3 A C H B B3 = 1 = 2 G = = = E B2 = 3 B5 L D B6 L2 L1 0068771-E 12/17 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Package mechanical data DPAK MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A A1 A2 B b4 2.2 0.9 0.03 0.64 5.2 2.4 1.1 0.23 0.9 5.4 0.086 0.035 0.001 0.025 0.204 0.094 0.043 0.009 0.035 0.212 C C2 D D1 E E1 0.45 0.48 6 0.6 0.6 6.2 0.017 0.019 0.236 0.023 0.023 0.244 6.6 0.252 e e1 H L (L1) L2 L4 R V2 5.1 6.4 0.200 4.7 2.28 4.4 9.35 1 0.090 4.6 10.1 0.173 0.368 0.039 2.8 0.8 0.6 0.181 0.397 0.110 0.031 1 0.023 0.2 0° 0.260 0.185 0.039 0.008 8° 0° 8° 0068772-F 13/17 Package mechanical data STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. 14/17 MAX. MIN. A 4.40 TYP 4.60 0.173 TYP. MAX. A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 0.181 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD 5 Package mechanical data Package mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 16.4 N 50 T TAPE MECHANICAL DATA DIM. mm inch MIN. MAX. A0 6.8 7 0.267 0.275 B0 10.4 10.6 0.409 0.417 B1 D 1.5 D1 1.5 E 1.65 MIN. 12.1 0.476 1.6 0.059 0.063 1.85 0.065 0.073 7.4 7.6 0.291 0.299 2.55 2.75 0.100 0.108 0.153 0.161 P0 3.9 4.1 P1 7.9 8.1 0.311 0.319 P2 1.9 2.1 0.075 0.082 40 15.7 MAX. 330 12.992 13.2 0.504 0.520 18.4 0.645 0.724 0.059 0.795 1.968 22.4 0.881 BASE QTY BULK QTY 2500 2500 0.059 F R MIN. MAX. K0 W inch MAX. 1.574 16.3 0.618 0.641 15/17 Revision history 6 STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Revision history Table 9. 16/17 Date Revision Changes 16-Jun-2005 1 First release 06-Sep-2005 2 Inserted ecopack indication 03-Oct-2005 3 Corrected value on Table 1 23-Mar-2006 4 Complete version. New template STB5NK52ZD-1 - STD5NK52ZD-1 - STD5NK52ZD - STP5NK52ZD Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 17/17