MBRF1035 THRU MBRF10100 Isolation 10.0 AMPS. Schottky Barrier Rectifiers Voltage Range 35 to 100 Volts Current 10.0 Amperes ITO-220AC Features .185(4.7) .390(9.90) .124(3.16) .118(3.00) .13 4(3. 4)D IA . 112 (2. 85) . 11 3(3. 0)D IA . 100 (2.5 5) .2 72( 6. 9) .2 48( 6. 3) . 606(1 5.5 ) . 583(1 4.8 ) .0 63 (1 .6 ) MA X .161(4.1) .146(3.7) .110( 2.8) Mechanical Data .406(10.3) .173(4.4) Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.25”(6.35mm)from case . 071 (1. 8) . 543( 13. 8) MA X . 512( 13. 2) .0 98(2 .5) Cases: ITO-220AC molded plastic body Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 5 in. - lbs. max Weight: 0.08 ounce, 2.24 grams 2 . 100 (2.5 5) . 10 0( 2 . 55) Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBRF MBRF MBRF MBRF MBRF MBRF Units Type Number 1035 1045 1050 1060 1090 10100 Maximum Recurrent Peak Reverse Voltage V VRRM 35 45 50 60 90 100 Maximum RMS Voltage V VRMS 24 31 35 42 63 70 Maximum DC Blocking Voltage V VDC 35 45 50 60 90 100 Maximum Average Forward Rectified Current See Fig. 1 Peak Repetitive Forward Current (Square Wave, 20KHz) at Tc=135oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Voltage Rate of Change (Rated VR) Maximum Instantaneous Forward Voltage at (Note 2) IF=10A, Tc=25OC IF=10A, Tc=125OC IF=20A, Tc=25OC IF=20A, Tc=125OC Maximum Instantaneous Reverse Current @ Tc =25℃at Rated DC Blocking Voltage (Note 2) @ Tc=125℃ Typical Junction Capacitance I(AV) 10 A IFRM 20.0 A IFSM 150 A IRRM dV/dt 1.0 0.57 0.84 0.72 VF 0.80 0.70 0.95 0.85 0.1 15.0 IR Cj A 0.5 V/uS 10,000 390 Maximum Thermal Resistance, Junction to Case RθJC (Note 3) TJ Operating Junction Temperature Range TSTG Storage Temperature Range Notes: 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Mounted on Heatsink Size of 2 in x 3 in x 0.25 in Al-Plate. - 130 - 300 0.85 0.71 - V 0.1 6.0 mA mA 220 pF 4.0 ℃/W -65 to +150 -65 to +175 ℃ ℃ RATINGS AND CHARACTERISTIC CURVES (MBRF1035 THRU MBRF10100) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT FIG.1- FORWARD CURRENT DERATING CURVE 175 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 12 10 8 6 4 MBRF1035-MBRF1045 MBRF1050-MBRF10100 2 150 125 100 75 50 25 0 0 50 100 0.1 150 1 o 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 40 Tj=125 0C 10 10 INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 10 NUMBER OF CYCLES AT 60Hz CASE TEMPERATURE. ( C) Pulse Width=300 s 1% Duty Cycle 1 0 Tj=25 C 0.1 MBRF1035-MBRF1045 MBRF1050-MBRF1060 MBRF1090-MBRF10100 Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C MBRF1035-MBRF1045 MBRF1050-MBRF10100 0.01 0 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FORWARD VOLTAGE. (V) 60 80 100 120 140 100 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 40 FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS FIG.5- TYPICAL JUNCTION CAPACITANCE 5,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 500 100 0.1 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) MBRF1035-MBRF1045 MBRF1050-MBRF1060 MBRF1090-MBRF10100 1.0 10 100 REVERSE VOLTAGE. (V) 10 1 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) - 131 - 10 100