UTC DTA143Z PNP DIGITAL TRANSISTOR PNP DIGITAL TRANSISTOR (BUILT-IN RESISTORS) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). * The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. * Only the on/off conditions need to be set for operation, making device design easy. EQUIVALENT CIRCUIT 3 MARKING OUT R1 IN 2 1 SOT-23 AE3Z R2 GND(+) 1: GND IN 2: IN 3: OUT OUT GND(+) ABSOLUTE MAXIMUM RATINGS (Ta=25℃) PARAMETER Supply voltage Input voltage Output current SYMBOL RATINGS UNIT VCC VIN IO -50 -30 ~ +5 -100 -100 200 150 -55 ~ +150 V V IC (Max.) PD Tj Tstg Power dissipation Junction temperature Storage temperature mA mW ℃ ℃ ELECTRICAL CHARACTERISTICS (Ta = 25℃) PARAMETER Input voltage Output voltage Input current Output current DC current gain Input resistance Resistance ratio Transition frequency * Transition frequency of the device UTC SYMBOL VI (off) VI (on) VO (on) II IO (off) GI R1 R2/R1 fT TEST CONDITIONS VCC=−5V, IO=−100μA VO=−0.3V, IO=−5mA IO/II=−5mA/−0.25mA VI=−5V VCC=−50V, VI=0V VO=−5V, IO=−10mA VCE=−10V, IE=5mA, f=100MHz * UNISONIC TECHNOLOGIES MIN TYP MAX UNIT -0.5 -1.3 80 3.29 8 V -0.1 -0.3 -1.8 -0.5 V mA μA 4.7 10 250 6.11 12 KΩ MHz CO. LTD 1 QW-R206-072,B UTC DTA143Z PNP DIGITAL TRANSISTOR ELECTRICAL CHARACTERISTIC CURVES Output current vs. input voltage (OFF characteristics) Input voltage vs. output current (ON characteristics) -100 -10m VO = -0.3V -20 -10 -5 Ta = -40℃ 25℃ 100℃ -2 -1 -500m VCC = -5V -5m OUTPUT CURRENT, I O (A) INPUT VOLTAGE, V I(on) (V) -50 -2m -1m -500µ Ta = 100℃ 25℃ -40℃ -200µ -100µ -50µ -20µ -10µ -5µ -200m -2µ -100m -1µ -100µ -200µ -500µ -1m -2m -5m -10m -20m -50m-100m 0 -0.5 OUTPUT CURRENT, I O (A) DC current gain vs. output current 100 -500m OUTPUT VOLTAGE, V O(on) (V) I DC CURRENT GAIN, G 200 -40℃ 50 20 10 5 2 -2.0 -2.5 -3.0 -1 VO = -5V Ta = 100℃ 25℃ -1.5 Output voltage vs. output current 1K 500 -1.0 INPUT VOLTAGE, V I(off) (V) -200m -100m IO/II = 20 Ta = 100℃ 25℃ -40℃ -50m -20m -10m -5m -2m 1 -1m -100µ -200µ -500µ -1m -2m -5m -10m -20m -50m -100m -100µ -200µ -500µ -1m OUTPUT CURRENT, I O (A) -2m -5m -10m -20m -50m-100m OUTPUT CURRENT, I O (A) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UTC UNISONIC TECHNOLOGIES CO. LTD 2 QW-R206-072,B