3314 POWER INDUCTORS High-Reliability Power Inductors MS414PJB ■ High temperature material allows operation in ambient temperatures up to 155°C ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel. Weight 44.1 – 46.5 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth Recommended pick and place nozzle OD: 3.3 mm; ID: ≤ 1.65 mm Isat (A)5 Irms (A)6 Inductance DCR 4 SRF (MHz) 2 3 ±20% max 10% 20% 30% 20°C40°C min typ drop drop drop rise rise Part number1 (µH)(Ohms) MS414PJB102MSZ MS414PJB222MSZ MS414PJB332MSZ MS414PJB472MSZ MS414PJB562MSZ 1.0 0.055 1502151.81.91.91.31.7 2.2 0.100 98.0 1401.11.41.50.96 1.3 3.3 0.145 80.5 115 0.98 1.2 1.3 0.801.1 4.7 0.17560.2 86 0.970.991.0 0.721.0 5.6 0.22051.8 74 0.920.950.980.660.88 MS414PJB682MSZ MS414PJB822MSZ MS414PJB103MSZ MS414PJB153MSZ MS414PJB183MSZ 6.8 8.2 10 15 18 0.24050.4 72 0.27042.0 60 0.33038.5 55 0.44031.5 45 0.57525.9 37 0.820.830.860.660.88 0.580.750.780.560.80 0.560.660.700.520.70 0.460.560.590.500.66 0.440.510.540.420.54 MS414PJB223MSZ MS414PJB333MSZ MS414PJB473MSZ MS414PJB563MSZ MS414PJB683MSZ 22 33 47 56 68 0.72023.8 34 0.92018.9 27 1.40 15.4 22 1.55 13.3 19 1.80 11.9 17 0.440.480.490.360.48 0.300.380.400.340.46 0.280.330.340.280.38 0.260.300.310.260.34 0.220.260.290.240.32 MS414PJB823MSZ 82 MS414PJB104MSZ100 MS414PJB124MSZ120 MS414PJB154MSZ150 MS414PJB184MSZ180 2.00 2.75 3.45 4.10 4.80 9.8 14 0.200.240.260.230.31 9.1 13 0.190.230.240.210.30 7.7 11 0.190.210.220.180.24 7.0 10 0.160.190.200.160.22 6.3 9.00.140.170.180.150.20 MS414PJB224MSZ220 6.00 MS414PJB334MSZ330 9.30 MS414PJB474MSZ 470 12.0 MS414PJB564MSZ 560 14.0 MS414PJB684MSZ 680 18.5 4.90 7.00.140.160.170.130.18 4.20 6.00.110.120.130.100.14 3.15 4.5 0.0800.11 0.11 0.10 0.13 3.15 4.5 0.0950.1050.11 0.0900.12 2.80 4.0 0.0920.1000.1050.0800.10 MS414PJB824MSZ 820 MS414PJB105MSZ1000 MS414PJB155MSZ1500 2.59 3.7 0.0860.0990.1000.0700.090 2.10 3.0 0.0900.0990.1000.0650.080 1.89 2.7 0.0800.0860.0900.0500.060 24.0 31.0 44.0 1. When ordering, please specify testing code: MS414PJB105MSZ Testing:Z=COTS H=Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document MS541-1 Revised 09/24/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 3314y POWER INDUCTORS MS414PJB Series (3315) Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 1000 Inductance (µH) Inductance (µH) 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 1 µH 1 0.1 0.01 1000 µH 1000 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 1 µH 1 1 0.1 10 Frequency (MHz) 0.1 0.01 0.1 Current (A) 1 10 Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 Isat Irms 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in inches mm Document MS541-2 Revised 09/24/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.