POWER INDUCTORS High-Reliability Power Inductors ML566PNB ■ High current, low DCR shielded power inductors ■ High temperature materials allow operation in ambient temperatures up to 155°C Core material Ferrite Terminations Matte tin over nickel over phos bronze. Weight: 2.3 g – 2.5 g Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 200/7″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 16 mm pocket spacing, 4.7mm pocket depth DCR Inductance2 (mOhms) Part number1 (µH) typ max ML566PNB102MLZ 1.0 ±20% 5.6 6.3 ML566PNB152MLZ 1.5 ±20% 8.7 9.7 ML566PNB272MLZ 2.7 ±20% 10.3 11.5 ML566PNB332MLZ 3.3 ±20% 15.1 16.8 ML566PNB472MLZ 4.7 ±20% 19.1 21.3 ML566PNB562MLZ 5.6 ±20% 22.1 24.6 ML566PNB682MLZ 6.8 ±20% 24.9 27.7 ML566PNB822MLZ 8.2 ±20% 27.4 30.5 ML566PNB103MLZ 10 ±20% 36.8 40.9 ML566PNB123MLZ 12 ±20% 38.9 43.3 ML566PNB153MLZ 15 ±20% 48.6 54.1 ML566PNB183MLZ 18 ±20% 51.0 56.7 ML566PNB223MLZ 22 ±20% 60.3 67.0 ML566PNB273MLZ 27 ±20% 67.5 75.0 ML566PNB333MLZ 33 ±20% 81.7 90.8 ML566PNB393MLZ 39 ±20% 95.2 105.8 ML566PNB473MLZ 47 ±20% 120.6 134.0 ML566PNB563MLZ 56 ±20% 133.8 148.7 ML566PNB683MLZ 68 ±20% 167.3 185.9 ML566PNB823MLZ 82 ±20% 188.5 209.5 ML566PNB104MLZ 100 ±20% 216.8 240.9 ML566PNB124KLZ 120 ±10% 287.2 319.2 ML566PNB154KLZ 150 ±10% 326.7 363.0 ML566PNB184KLZ 180 ±10% 379.5 421.7 ML566PNB224KLZ 220 ±10% 488.2 542.5 ML566PNB274KLZ 270 ±10% 560.1 622.4 ML566PNB334KLZ 330 ±10% 731.4 812.7 ML566PNB394KLZ 390 ±10% 813.7 904.2 ML566PNB474KLZ 470 ±10% 935.11039 ML566PNB564KLZ 560 ±10% 1193 1326 ML566PNB684KLZ 680 ±10% 1370 1523 ML566PNB824KLZ 820 ±10% 1590 1767 ML566PNB105KLZ 1000 ±10% 2090 2323 3 SRF 4 (MHz) min typ 70.0100 60.0 85.0 49.0 70.0 46.0 65.0 30.0 42.0 26.0 37.0 23.0 33.0 22.0 31.0 19.0 27.0 17.0 24.0 15.0 22.0 13.0 19.0 12.6 18.0 11.2 16.0 10.5 15.0 9.3 13.3 8.4 12.0 7.4 10.6 6.8 9.7 6.2 8.8 5.6 8.0 5.0 7.2 4.6 6.6 4.1 5.9 3.7 5.3 3.3 4.7 2.9 4.1 2.7 3.8 2.5 3.5 2.1 3.0 2.0 2.8 1.8 2.6 1.7 2.4 Isat (A)5 Irms (A)6 10% 20% 30% 20°C40°C dropdropdropriserise 18.1420.6422.24 6.00 8.00 14.0615.9017.08 5.80 7.80 11.6613.1614.16 5.00 6.80 9.7411.0811.98 4.50 6.30 8.62 9.7010.42 4.40 6.00 7.62 8.74 9.44 3.95 5.75 7.38 8.36 9.00 3.70 5.20 6.84 7.70 8.32 3.35 4.67 5.88 6.66 7.18 2.85 3.90 5.34 6.04 6.52 2.69 3.65 4.68 5.36 5.78 2.50 3.40 4.32 4.92 5.32 2.41 3.19 3.84 4.34 4.75 2.30 3.14 3.54 4.02 4.32 2.06 2.86 3.24 3.66 3.96 1.90 2.60 3.04 3.46 3.72 1.73 2.39 2.70 3.08 3.34 1.50 2.10 2.46 2.80 3.02 1.44 2.01 2.26 2.54 2.74 1.30 1.80 1.98 2.26 2.46 1.24 1.72 1.84 2.08 2.24 1.19 1.65 1.62 1.86 2.04 1.03 1.42 1.48 1.70 1.82 0.95 1.30 1.36 1.56 1.68 0.89 1.21 1.22 1.38 1.50 0.76 1.00 1.12 1.26 1.36 0.72 0.95 1.00 1.10 1.20 0.65 0.87 0.946 1.00 1.10 0.59 0.79 0.864 0.978 1.00 0.56 0.76 0.776 0.884 0.956 0.50 0.67 0.720 0.818 0.882 0.46 0.62 0.634 0.728 0.792 0.43 0.58 0.594 0.676 0.728 0.36 0.50 1. When ordering, please specify testing code: ML566PNB105KLZ Testing:Z=COTS H=Screening per Coilcraft CP‑SA‑10001 N =Screening per Coilcraft CP‑SA‑10004 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD‑A fixture in an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer. 5. DC current at which the inductance drops the specified amount from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document ML540-1 Revised 12/05/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. POWER INDUCTORS ML566PNB Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 1 0.1 10 Frequency (MHz) 0.1 0.1 10 1 100 Current (A) Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 Isat 10 Irms 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in inches mm Document ML540-2 Revised 12/05/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.