3314 POWER INDUCTORS High-Reliability Power Inductors ML414PJB ■ High temperature material allows operation in ambient temperatures up to 155°C ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. Core material Ferrite Terminations Silver-palladium-platinum-glass frit. Weight 44.1 – 46.5 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth Recommended pick and place nozzle OD: 3.3 mm; ID: ≤ 1.65 mm Isat (A)5 Irms (A)6 1. When ordering, please specify testing code: Inductance DCR 4 SRF (MHz) 2 3 ±20% max 10% 20% 30% 20°C40°C ML414PJB105MLZ min typ drop drop drop rise rise Part number1 (µH)(Ohms) Testing:Z =COTS ML414PJB102MLZ ML414PJB222MLZ ML414PJB332MLZ ML414PJB472MLZ ML414PJB562MLZ 1.0 0.055 1502151.81.91.91.31.7 2.2 0.100 98.0 1401.11.41.50.96 1.3 3.3 0.145 80.5 115 0.98 1.2 1.3 0.801.1 4.7 0.17560.2 86 0.970.991.0 0.721.0 5.6 0.22051.8 74 0.920.950.980.660.88 ML414PJB682MLZ 6.8 ML414PJB822MLZ 8.2 ML414PJB103MLZ 10 ML414PJB153MLZ 15 ML414PJB183MLZ 18 0.24050.4 72 0.27042.0 60 0.33038.5 55 0.44031.5 45 0.57525.9 37 0.820.830.860.660.88 0.580.750.780.560.80 0.560.660.700.520.70 0.460.560.590.500.66 0.440.510.540.420.54 ML414PJB223MLZ ML414PJB333MLZ ML414PJB473MLZ ML414PJB563MLZ ML414PJB683MLZ 0.72023.8 34 0.92018.9 27 1.40 15.4 22 1.55 13.3 19 1.80 11.9 17 0.440.480.490.360.48 0.300.380.400.340.46 0.280.330.340.280.38 0.260.300.310.260.34 0.220.260.290.240.32 22 33 47 56 68 ML414PJB823MLZ 82 ML414PJB104MLZ100 ML414PJB124MLZ120 ML414PJB154MLZ150 ML414PJB184MLZ180 2.00 2.75 3.45 4.10 4.80 9.8 14 0.200.240.260.230.31 9.1 13 0.190.230.240.210.30 7.7 11 0.190.210.220.180.24 7.0 10 0.160.190.200.160.22 6.3 9.00.140.170.180.150.20 ML414PJB224MLZ220 6.00 ML414PJB334MLZ330 9.30 ML414PJB474MLZ 470 12.0 ML414PJB564MLZ 560 14.0 ML414PJB684MLZ 680 18.5 4.90 7.00.140.160.170.130.18 4.20 6.00.110.120.130.100.14 3.15 4.5 0.0800.11 0.11 0.10 0.13 3.15 4.5 0.0950.1050.11 0.0900.12 2.80 4.0 0.0920.1000.1050.0800.10 ML414PJB824MLZ 820 ML414PJB105MLZ1000 ML414PJB155MLZ1500 2.59 3.7 0.0860.0990.1000.0700.090 2.10 3.0 0.0900.0990.1000.0650.080 1.89 2.7 0.0800.0860.0900.0500.060 24.0 31.0 44.0 H=Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document ML541-1 Revised 09/24/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 3314 POWER INDUCTORS ML414PJB Series (3315) Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 1000 Inductance (µH) Inductance (µH) 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 1 µH 1 0.1 0.01 1000 µH 1000 330 µH 100 µH 100 33 µH 10 µH 10 3.3 µH 1 µH 1 1 0.1 10 Frequency (MHz) 0.1 0.01 0.1 Current (A) 1 10 Current Derating 120 100 90 80 70 60 50 40 25°C Percent of rated Current 110 30 20 Isat Irms 10 0 -55 -40 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Dimensions are in inches mm Document ML541-2 Revised 09/24/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.