3316 POWER INDUCTOR 200°C Power Inductors AT563PKA ■ High temperature materials allow operation in ambient temperatures up to 200°C. ■ Soldered self-leaded construction for excellent solderability. ■ Very low DCR values and excellent current handling Core material Ferrite Terminations Tin-silver-copper over copper Weight 0.95 – 1.25 g Ambient temperature –55°C to +140°C with Irms current, +140°C to +200°C with derated current Storage temperature Component: –55°C to +200°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 750 per 13″ reel Plastic tape: 24 mm wide, 0.35 mm thick, 12 mm pocket spacing, 6.4 mm pocket depth DCR (mOhm) Inductance2 Part number1 ±20% (µH) typ max SRF (MHz)3 min typ Isat (A)4 Irms (A)5 10%20%30% 20°C40°C drop drop drop rise rise AT563PKA301MLZ 0.3 2.6 3.0200238 14.016.017.0 8.012.0 AT563PKA901MLZ 0.9 5.1 6.0122153 8.610.210.9 6.1 8.8 AT563PKA122MLZ 1.2 5.16.0 100 125 7.08.49.3 3.45.6 AT563PKA182MLZ 1.8 7.79.086 108 6.27.48.1 3.25.0 AT563PKA222MLZ 2.2 6.810 7492 6.06.77.2 2.94.5 AT563PKA272MLZ 2.7 9.411 6379 5.16.06.4 2.74.2 AT563PKA332MLZ 3.3 11.113 5771 4.75.56.0 2.44.0 AT563PKA392MLZ 3.9 15.318 5468 4.35.25.5 2.44.0 AT563PKA472MLZ 4.7 20.424 4657 4.04.44.8 2.43.7 AT563PKA562MLZ 5.6 21.325 4353 3.64.14.4 2.23.3 AT563PKA682MLZ 6.8 25.530 3848 3.33.74.0 2.23.3 AT563PKA822MLZ 8.2 29.835 3544 2.93.43.7 2.23.2 AT563PKA103MLZ 10 32.338 3038 2.73.13.4 2.13.1 AT563PKA123MLZ 12 40.848 2633 2.52.93.1 1.72.7 AT563PKA153MLZ 15 49.358 2531 2.22.52.8 1.92.6 AT563PKA183MLZ 18 59.570 2127 2.12.42.6 1.92.5 AT563PKA223MLZ 22 72.385 2025 1.92.12.3 1.82.4 AT563PKA273MLZ 27 85100 1924 1.71.92.1 1.31.9 AT563PKA333MLZ 33 109128 1620 1.51.71.9 1.31.8 AT563PKA393MLZ 39 116136 1418 1.31.51.7 1.31.8 AT563PKA473MLZ 47 146172 1215 1.21.41.5 1.11.5 AT563PKA563MLZ 56 170200 1114 1.11.31.4 0.91.3 AT563PKA683MLZ 68 221 260 10 13 0.85 1.2 1.3 0.821.2 AT563PKA823MLZ 82 264 310 9.512 0.82 1.1 1.2 0.811.2 AT563PKA104MLZ 100 306 360 8.310 0.800.961.1 0.801.1 AT563PKA124MLZ 120 384 452 8.310 0.700.850.98 0.680.90 AT563PKA154MLZ 150 432 508 7.0 8.7 0.650.800.86 0.630.87 ® © Coilcraft, Inc. 2012 Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com 1. When ordering, specify testing code: AT563PKA301MLZ Testing:Z =COTS H =Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. SRF measured using Agilent/ HP 8753D network analyzer or equivalent.. 4. Typical DC current at which the inductance drops 10% (typ) from its value without current. 5. Typical Current that causes a 40°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document AT196-1 Revised 04/22/11 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 3316 POWER INDUCTOR AT563PKA Series (3316) Irms Derating Dot indicates start 0.390 max 9,91 0.330 8,38 0.225 max 5,71 0.460 max 11,68 0.360 min 9.14 Recommended Land Pattern 0.060 1,52 0.160 4,06 0.150 typ 3,81 0.120 3,05 0.520 max 13,21 Dimensions are in inches mm Document AT196-2 Revised 04/22/11 ® © Coilcraft, Inc. 2012 0.400 10,16 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.