COILCRAFT AE558PTA202MSZ

POWER INDUCTORS
Outgassing Compliant Power Inductors AE558PTA
■ High temperature materials allow operation in ambient
temperatures up to 155°C.
■ Passes NASA low outgassing specifications
■ Tin-lead (Sn-Pb) termination for the best possible board
adhesion
■ Excellent current handling; very low DCR
Core material Ferrite
Terminations Tin-lead over tin over nickel over phos bronze
Weight 1.6 g
Ambient temperature –55°C to +105°C with Irms current, +105°C to
+155°C with derated current
Storage temperature Component: –55°C to +155°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Enhanced crush-resistant packaging 200/7″ reel
Plastic tape: 24 mm wide,0.4 mm thick, 16 mm pocket spacing,
5.45 mm pocket depth
Isat (A)5
SRF (MHz)4 Inductance2 DCR max3 Part number1 ±20% (µH)
(mOhm)
min typ
10% drop 20% drop 30% drop
AE558PTA331MSZ
AE558PTA801MSZ
AE558PTA102MSZ
AE558PTA122MSZ
AE558PTA132MSZ
AE558PTA152MSZ
AE558PTA182MSZ
AE558PTA202MSZ
AE558PTA222MSZ
AE558PTA252MSZ
AE558PTA322MSZ
AE558PTA402MSZ
AE558PTA432MSZ
AE558PTA572MSZ
0.33
0.80
1.0
1.2
1.3
1.5
1.8
2.0
2.2
2.5
3.2
4.0
4.3
5.7
4.0119170
29.530.030.5
4.0 70.0
100
24.925.225.6
4.0 66.5
95.0 16.517.017.5
6.0 63.7
91.0 20.521.021.3
4.0 56.7
81.0 12.916.817.2
6.0 52.5
75.0 13.514.014.5
6.0 49.0
70.0 13.313.814.3
9.0 45.5
65.0 15.315.816.2
4.0 40.6
58.0 8.9 9.610.0
7.5 38.5
55.0 11.411.812.1
6.037.1
53.0 7.37.88.5
9.032.9
47.0 8.38.58.8
7.530.8
44.0 6.46.87.0
9.024.5
35.0 5.45.86.0
Irms (A)6
20°C rise 40°C rise
12.516.3
12.516.3
12.516.3
11.015.0
12.516.3
11.015.0
11.015.0
8.511.5
12.516.3
9.012.0
11.0
15.0
8.5
11.5
9.0
12.0
8.5
11.5
1. When ordering, please specify testing code:
AE558PTA103MSZ
Testing:Z=COTS
H=Screening per Coilcraft CP-SA-10001
N
=Screening per Coilcraft CP-SA-10004
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A or equivalent.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 8753D network analyzer.
5. Typical DC current at which the inductance drops the specified amount from its value without current.
6. Typical current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document AE535-1 Revised 12/05/12
®
© Coilcraft, Inc. 2012
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.
POWER INDUCTORS
AE558PTA Series
Typical L vs Frequency
Typical L vs Current
7
7
5.7 µH
5
4
3.2 µH
3
2.0 µH
2
5.7 µH
6
Inductance (µH)
Inductance (µH)
6
5
4
3.2 µH
3
2.0 µH
2
1.3 µH
1.3 µH
1
1
0.8 µH
0.8 µH
0
0.1
1
10
100
Frequency (MHz)
0
0.1
Irms Derating
Current (A)
10
•
110
2
3
Terminal 3 is for
mounting stability only.
0.402 ±0.008
10,2 ±0,2
100
100
1
0.433 ±0.008
11,0 ±0,2
120
90
80
70
60
0.205 max
5,20
50
40
25°C
Percent of rated Irms
1
30
20
0.075 ±0.004
1,90 ±0,1
10
0
-55 -40
-20
0
20
40
60
80
100
120
140 160
Ambient temperature (°C)
0.075 ±0.004
1,90 ±0,1
Suggested
Land Pattern
0.083 ±0.004
2,10 ±0,1
1
0.152
3,85
0.083 ±0.004
2,10 ±0,1
0.083 ±0.004
2,10 ±0,1
0.118
3,00
0.091
2,30
Dimensions are in
3
0.215
5,47
0.134
3,40
2
inches
mm
Document AE535-2 Revised 12/05/12
®
© Coilcraft, Inc. 2012
0.118 0.125
3,00 3,18
1102 Silver Lake Road
Cary, IL 60013
Phone 800-981-0363
Fax 847-639-1508
Email [email protected]
www.coilcraft-cps.com
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specifications subject to change without notice.
Please check our web site for latest information.