4018 POWER INDUCTORS Outgassing Compliant Power Inductors AE425PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Passes NASA low outgassing specifications ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel. Weight 54 – 64 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″ reel Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.9 mm pocket depth Recommended pick and place nozzle OD: 4 mm; ID: ≤ 2 mm Isat (A)5 Irms (A)6 DCR 4 2 3 SRF (MHz) Inductance max 10% 20% 30% 20°C 40°C Part number1(µH)(Ohms) min typ drop drop drop rise rise AE425PJB351MSZ 0.35 ±20% 0.040 252 360 5.9 6.1 6.3 2.2 3.1 AE425PJB561MSZ 0.56 ±20% 0.030 175 250 4.8 5.2 5.3 1.9 2.8 AE425PJB102NSZ 1.0 ±30% 0.040 126 180 2.8 3.0 3.1 1.8 2.7 AE425PJB222MSZ 2.2 ±20% 0.070 63 90 2.7 2.8 2.9 1.6 2.3 AE425PJB262MSZ 2.6 ±20% 0.080 59 85 2.6 2.7 2.8 1.5 2.0 AE425PJB332MSZ 3.3 ±20% AE425PJB472MSZ 4.7 ±20% AE425PJB682MSZ 6.8 ±20% AE425PJB103MSZ 10 ±20% AE425PJB153MSZ 15 ±20% 0.080 52 0.125 45 0.150 35 0.200 28 0.260 22 75 65 50 40 32 2.1 2.3 2.4 1.4 2.0 1.8 1.9 1.9 1.3 1.8 1.2 1.3 1.3 1.0 1.5 1.1 1.2 1.3 0.90 1.25 0.860.910.940.801.12 AE425PJB183MSZ 18 ±20% AE425PJB223MSZ 22 ±20% AE425PJB333MSZ 33 ±20% AE425PJB473MSZ 47 ±20% AE425PJB683MSZ 68 ±20% 0.270 18 27 0.360 18 26 0.420 14 20 0.650 11 16 0.950 9.013 0.780.830.850.701.00 0.740.800.830.650.90 0.580.640.680.550.80 0.510.550.560.450.68 0.410.450.460.400.56 AE425PJB104MSZ100 ±20% AE425PJB124MSZ120 ±20% AE425PJB154MSZ150 ±20% AE425PJB184MSZ180 ±20% AE425PJB224MSZ 220 ±20% 1.40 1.60 2.00 2.50 3.70 7.010 0.340.360.370.350.50 6.0 9.0 0.310.330.340.300.45 5.6 8.0 0.270.290.300.280.40 5.2 7.5 0.240.260.270.260.36 4.5 6.5 0.21 0.225 0.235 0.20 0.30 AE425PJB334MSZ330 ±20% 5.90 AE425PJB474MSZ470 ±20% 7.80 AE425PJB564MSZ560 ±20%10.0 AE425PJB684MSZ680 ±20%11.5 AE425PJB824MSZ820 ±20%14.0 3.8 5.5 0.180.190.200.170.23 3.0 4.5 0.140.160.170.150.20 2.8 4.0 0.130.140.150.140.18 2.4 3.5 0.120.130.140.120.16 2.0 2.9 0.110.120.130.100.14 AE425PJB105MSZ1000 ±20%18.0 AE425PJB155MSZ1500 ±20% 25.0 AE425PJB185MSZ1800 ±20% 31.5 AE425PJB225MSZ2200 ±20% 32.5 AE425PJB335MSZ3300 ±20% 48.0 1.9 2.8 0.100.110.110.098 0.125 1.6 2.4 0.0950.10 0.1050.0800.110 1.6 2.3 0.0900.0950.1000.0700.095 1.4 2.1 0.0880.0990.1000.0700.090 1.1 1.6 0.0820.0920.0940.0550.075 1. When ordering, please specify testing code: AE425PJB105MSZ Testing:Z =COTS H =Screening per Coilcraft CP-SA-10001 N =Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Document AE435-1 Revised 06/07/11 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 4018 POWER INDUCTORS AE425PJB Series (4018) Typical L vs Frequency Typical L vs Current 10000 10000 2200 µH 680 µH 100 22 µH 10 4.7 µH 1 µH 1 0.1 0.01 2200 µH 1000 Inductance (µH) Inductance (µH) 1000 680 µH 100 22 µH 10 4.7 µH 1 µH 1 0.1 10 1 Frequency (MHz) 0.1 0.01 0.1 Current (A) 1 10 Current Derating 0.1535 ±0.003* 3,90 ±0,076 120 100 90 0.1535 ±0.003* 3,90 ±0,076 80 Suggested Land Pattern 70 0.118 3,00 0.090 2,30 0.0709 ±0.004† 1,80 ±0,10 60 50 40 25°C Percent of rated Current 110 30 20 Isat Irms 10 0 -55 -40 -20 0 0.123 3,124 20 40 60 80 100 120 0.090 2,30 0.028 0,70 45° typ 0.173 4,40 140 160 Ambient temperature (°C) 0.060 1,52 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.011 in / 0,28 mm. † Height dimension is after mounting. For 0.060 1,50 0.123 3,124 0.173 4,40 maximum height dimension before mounting, add 0.006 in / 0,152 mm. Dimensions are in inches mm Document AE435-2 Revised 06/07/11 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.