Document 123-1 SMT Data Line EMI Filters – TTDLF We now offer an even more economical version of this series: PDLF. The PDLF is electrically identical and fits the same land pattern. For the TTDLF 10000, please consider our CCDLF10000. We will, however, continue to produce the TTDLF series indefinitely. Coilcraft surface mount filters are designed to virtually eliminate the problem of conducted EMI in data line applications. They provide exceptional common mode noise attenuation from 15 MHz to 300 MHz while passing signal line data below 300 MHz with minimal attenuation. These low resistance filters have been designed for excellent electrical isolation (300 Vrms), environmental stability and low cost. These data line EMI filters come in 10, 8, 4, 3 and 2-line versions with DC current capacity of 500 or 100 mA. Current Inductance DCR max Part number1Lines max (mA)2 min (µH)3(mOhms) Color Dot 2000L_ 21005 250258 Red 2500L_ 25005 200265 Green 3000L_ 31005 250263 Orange 3500L_ 35005 200270 Violet 4000L_ 41005 250268 Yellow 4500L_ 45005 200270 Blue 10000L_101005 250601— 1. When ordering, please specify termination and packaging codes: TTDLF 2500LD TTDLF (except TTDLF 10000) Termination:L=RoHS compliant tin-silver-copper over silverplatinum-glass frit. Special order: S = non-RoHS tinlead (63/37). Packaging: C =7″ machine ready reel. EIA-481 embossed plastic tape (500 parts per full reel). B =Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. D =13″ machine ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). TTDLF 10000 Termination:L=RoHS compliant tin-silver-copper over nickel over moly-mag. Special order: S = non-RoHS tinlead (63/37). Packaging: D =13″ machine ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B =Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Current rating is for each line. 3. Inductance is per winding, tested at 1 MHz. 4. Operating temperature range -40°C to +85°C. 5. Electrical specifications at 25°C. Typical Response* Attenuation (dB) re: 50 Ohms TTDLF TTDLF TTDLF TTDLF TTDLF TTDLF TTDLF Weight (mg) -10 Differential Mode 0 10 20 Common Mode 30 0.1 1 10 100 1000 Frequency (MHz) *Measured on HP 8753D network analyzer. US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 123-1 Revised 10/15/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 123-2 Surface Mount Data Line EMI Filters TTDLF 4x00, 3x00, 2x00 0.200 5,08 4 0.050 typ 1,27 5 0.198max 5,03 1 8 0.030 0,76 5 Dimensions are in 0.050cen 1,27 6 7 0.050cen 1,27 0.155max 3,94 TTDLF 3000, 3500 8 7 6 5 4 3 2 1 2 3 4 1 8 0.320 max 8,13 TTDLF 4000, 4500 8 7 6 5 Recommended Land Pattern 0.008 ref 0,20 0.200 5,08 0.030 0,76 1 2 3 4 TTDLF 2000, 2500 8 7 6 5 0.060 1,52 inches mm 1 2 3 4 Packaging 500/7″reel; 2200/13″ reel; Plastic tape: 16 mm wide, 0.3mm thick, 8 mm pocket spacing, 3.8 mm pocket depth TTDLF 10000 1 0.030 0,76 0.050 cen 1,27 10 0.050 1,27 10 20 Dimensions are in 0.500 max 12,70 11 0.050 cen 1,27 1 Recommended Land Pattern 0.200 5,08 0.320max 8,13 0.030 0,76 0.150max 3,81 11 0.060 1,52 10 9 8 7 6 5 4 3 2 1 0.200 5,08 11 12 13 14 15 16 17 18 19 20 20 inches mm Packaging 1000/13″ reel; Plastic tape: 24 mm wide, 0.3 mm thick, 12 mm pocket spacing, 3.94 mm pocket depth US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 123-2 Revised 10/15/09 © Coilcraft Inc. 2013 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.