15ETH06SPbF/15ETH06-1PbF Vishay High Power Products Hyperfast Rectifier, 15 A FRED PtTM 15ETH06SPbF FEATURES 15ETH06-1PbF • Hyperfast recovery time Available • Low forward voltage drop RoHS* COMPLIANT • Low leakage current Base cathode 2 • 175 °C operating junction temperature 2 • Single die center tap module • Lead (Pb)-free (“PbF” suffix) • Designed and qualified for Q101 level 3 1 3 Anode 1 N/C N/C 2 D PAK DESCRIPTION/APPLICATIONS Anode State of the art hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, hyperfast recovery time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. TO-262 PRODUCT SUMMARY trr (typical) 22 ns IF(AV) 15 A VR 600 V ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS MAX. UNITS 600 V Peak repetitive reverse voltage VRRM Average rectified forward current IF(AV) TC = 140 °C 15 Non-repetitive peak surge current IFSM TJ = 25 °C 120 Peak repetitive forward current Operating junction and storage temperatures A IFM 30 TJ, TStg - 65 to 175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage SYMBOL VBR, VR TEST CONDITIONS MIN. TYP. MAX. 600 - - IF = 15 A - 1.8 2.2 IF = 15 A, TJ = 150 °C - 1.3 1.6 VR = VR rated - 0.2 50 TJ = 150 °C, VR = VR rated - 30 500 IR = 100 µA UNITS V Forward voltage VF Reverse leakage current IR Junction capacitance CT VR = 600 V - 20 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH µA * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 94003 Revision: 21-May-08 For technical questions, contact: [email protected] www.vishay.com 1 15ETH06SPbF/15ETH06-1PbF Hyperfast Rectifier, 15 A FRED PtTM Vishay High Power Products DYNAMIC RECOVERY CHARACTERISTICS (TC = 25 °C unless otherwise specified) PARAMETER Reverse recovery time SYMBOL trr TEST CONDITIONS IRRM Reverse recovery charge Qrr Reverse recovery time trr Peak recovery current IRRM TYP. MAX. IF = 1 A, dIF/dt = 100 A/µs, VR = 30 V - 22 30 IF = 15 A, dIF/dt = 100 A/µs, VR = 30 V - 28 35 TJ = 25 °C - 29 - - 75 - - 3.5 - - 7 - TJ = 125 °C Peak recovery current MIN. TJ = 25 °C TJ = 125 °C IF = 15 A dIF/dt = 200 A/µs VR = 390 V TJ = 25 °C - 57 - TJ = 125 °C - 300 - - 51 - ns A µC ns - 20 - A - 580 - nC MIN. TYP. MAX. UNITS TJ, TStg - 65 - 175 °C Thermal resistance, junction to case per leg RthJC - 1.0 1.3 Thermal resistance, junction to ambient per leg RthJA Typical socket mount - - 70 Thermal resistance, case to heatsink RthCS Mounting surface, flat, smooth and greased - 0.5 - - 2.0 - g - 0.07 - oz. 6.0 (5.0) - 12 (10) kgf · cm (lbf · in) Reverse recovery charge TJ = 125 °C IF = 15 A dIF/dt = 800 A/µs VR = 390 V UNITS Qrr THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range SYMBOL TEST CONDITIONS Weight Mounting torque Marking device www.vishay.com 2 Case style D2PAK 15ETH06S Case style TO-262 15ETH06-1 For technical questions, contact: [email protected] °C/W Document Number: 94003 Revision: 21-May-08 15ETH06SPbF/15ETH06-1PbF Hyperfast Rectifier, 15 A FRED PtTM 1000 IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) 100 Vishay High Power Products TJ = 175 °C TJ = 150 °C TJ = 25 °C 10 1 0.5 TJ = 175 °C 100 TJ = 150 °C 10 TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0.001 0 1.0 1.5 2.0 2.5 3.0 0 100 300 200 400 500 600 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 1000 100 TJ = 25 °C 10 0 100 200 300 400 500 600 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 94003 Revision: 21-May-08 For technical questions, contact: [email protected] www.vishay.com 3 15ETH06SPbF/15ETH06-1PbF Hyperfast Rectifier, 15 A FRED PtTM Vishay High Power Products 100 IF = 15 A 80 160 DC 150 140 Square wave (D = 0.50) 80 % rated VR applied 130 120 60 40 20 VR = 390 V TJ = 125 °C TJ = 25 °C See note (1) 110 0 5 10 15 20 0 100 25 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery vs. dIF/dt 35 1000 VR = 390 V TJ = 125 °C TJ = 25 °C 30 800 RMS Limit 25 IF = 30 A IF = 15 A 20 Qrr (nC) Average Power Loss (W) IF = 30 A 170 trr (ns) Allowable Case Temperature (°C) 180 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 15 10 DC 5 5 10 15 20 400 200 0 0 600 25 0 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 94003 Revision: 21-May-08 15ETH06SPbF/15ETH06-1PbF Hyperfast Rectifier, 15 A FRED PtTM Vishay High Power Products VR = 200 V 0.01 Ω L = 70 µH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Document Number: 94003 Revision: 21-May-08 For technical questions, contact: [email protected] www.vishay.com 5 15ETH06SPbF/15ETH06-1PbF Hyperfast Rectifier, 15 A FRED PtTM Vishay High Power Products ORDERING INFORMATION TABLE Device code 15 E T H 06 S 1 2 3 4 5 6 1 - Current rating (15 A) 2 - E = Single diode 3 - T = TO-220, D 2PAK 4 - H = Hyperfast rectifier 5 - Voltage rating (06 = 600 V) 6 - S = D2PAK 7 - None = Tube (50 pieces) TRL PbF 7 8 -1 = TO-262 TRL = Tape and reel (left oriented, for D2PAK package) 6 TRR = Tape and reel (right oriented, for D2PAK package) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 94003 Revision: 21-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1