ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipment series Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Compliant to the RoHS directive (2002/95/EC). ES FW Bi-polarized Specifications Item Performance Characteristics Category Temperature Range – 40 to +85°C Rated Voltage Range 6.3 to 50V Rated Capacitance Range 0.47 to 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz at 20°C Tangent of loss angle (tan δ) Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120Hz 6.3 4 8 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 10 3 6 16 2 4 25 2 4 35 2 4 50 2 4 Endurance The specifications listed at right shall be met when the capacitors are restored to 20°C after the rated voltage is applied for 1000 hours at 85°C with the polarity inverted every 250 hours. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above. Marking Printed with black color letter on clear green sleeve. Capacitance change tan δ Leakage current Within ±20% of the initial capacitance value 150% or less than the initial specified value Less than or equal to the initial specified value Type numbering system (Example : 10V 47µF) Radial Lead Type φd Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 P ± 0.5 φD+0.5 MAX. UE S 1 A 4 7 0 MEM Configuration Capacitance tolerance ( ±20%) Rated capacitance (47µF) (mm) Pressure relief vent (φ6.3up) φD L+ MAX. 15MIN 4MIN 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 φd 0.6 0.6 0.6 0.6 0.8 0.8 Rated voltage (10V) φD Code 5 DM 6.3 EM 8 · 10 PM 12.5 · 16 HM Series name Type • Please refer to page 20 about the end seal configulation. (φD < 10) 1.0 (φD 10) 1.5 φ D × L (mm) Dimensions V Cap.(µF) 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 6.3 0J 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 10 1A 5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 16 1C 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25 25 1E 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 25 12.5 × 25 16 × 25 16 × 31.5 35 1V 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 31.5 CAT.8100B Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UES1A331MPJ UES1C100MDJ UES1C471MHJ UES0J101MPJ UES1C102MHJ UES1V100MEJ UES1E220MEJ UES1H101MHJ UES0J101MPM UES0J102MHM UES0J221MPM UES0J330MDM UES0J331MPM UES0J470MEM UES0J471MPM UES1A101MPM UES1A102MHM UES1A220MDM UES1A221MPM UES1A330MEM UES1A331MPM UES1A470MEM UES1A471MHM UES1C100MDM UES1C101MPM UES1C102MHM UES1C220MEM UES1C221MPM UES1C330MEM UES1C331MHM UES1C470MPM UES1C471MHM UES1E100MDM UES1E101MPM UES1E102MHM UES1E221MHM UES1E330MPM UES1E331MHM UES1E470MPM UES1E471MHM UES1E4R7MDM UES1H010MDM UES1H100MPM UES1H220MPM UES1H221MHM UES1H2R2MDM UES1H330MPM UES1H331MHM UES1H3R3MDM UES1H470MPM UES1H4R7MEM UES1HR47MDM UES1V101MPM UES1V220MPM UES1V221MHM UES1V330MPM UES1V331MHM UES1V470MPM UES1V471MHM UES1V4R7MDM UES1V470MPH UES1H101MHM UES1E220MEM UES1V100MEM UES0J471MHM