ALUMINUM ELECTROLYTIC CAPACITORS ES Bi-Polarized, For Audio Equipment series Bi-polarized “nichicon MUSE” acoustic series. Suited for audio signal circuits. Adapted to the RoHS directive (2002/95/EC). ES Bi-polarized FW Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +85°C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.47 ~ 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 1 minute's application of rated voltage, leakage current is not more than 0.03CV or 3 (µA), whichever is greater. Measurement frequency : 120Hz, Temperature : 20°C tan δ Rated voltage (V) tan δ (MAX.) 6.3 0.24 10 0.20 16 0.16 25 0.16 35 0.14 50 0.12 Measurement frequency : 120Hz Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature 6.3 4 8 10 3 6 16 2 4 Capacitance change tan δ Leakage current 25 2 4 35 2 4 50 2 4 Endurance After 1000 hours' application of rated voltage at 85°C with the polarity inverted every 250 hours, capacitors meet the characteristics requirement listed at right. Shelf Life After storing the capacitors under no load at 85°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. Marking Printed with black color letter on clear green sleeve. Type numbering system (Example : 10V 47µF) Radial Lead Type Sleeve (P.E.T.) d 1 2 3 4 5 6 7 8 9 10 11 UES 1 A 4 7 0 MEM Configuration f D Code Capacitance tolerance (±20%) 5 DM Rated Capacitance (47µF) 6.3 EM Rated voltage (10V) 8 á 10 PM 12.5 á 16 HM Series name Type P ± 0.5 D+0.5 MAX. f f Pressure relief vent (f6.3up) Within ±20% of initial value 150% or less of initial specified value Initial specified value or less (mm) D 5 6.3 8 10 12.5 16 P 2.0 2.5 3.5 5.0 5.0 7.5 f d 0.6 0.6 0.6 0.6 0.8 0.8 f L+ MAX. 15MIN 4MIN • Please refer to page 21 about the end seal configulation. (fD < 10) 1.0 (fD 10) 1.5 φ D × L (mm) Dimensions V Cap.(µF) 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 Code R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 6.3 0J 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 10 1A 5 × 11 6.3 × 11 6.3 × 11 10 × 12.5 10 × 16 10 × 20 12.5 × 20 16 × 25 16 1C 5 × 11 6.3 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 20 12.5 × 20 12.5 × 25 16 × 25 25 1E 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 12.5 × 25 12.5 × 25 16 × 25 16 × 31.5 35 1V 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 12.5 10 × 20 12.5 × 25 16 × 25 16 × 25 50 1H 5 × 11 5 × 11 5 × 11 5 × 11 6.3 × 11 8 × 11.5 10 × 12.5 10 × 16 10 × 20 12.5 × 25 16 × 25 16 × 31.5 Please refer to page 21, 22, 23 about the formed or taped product spec. Please refer to page 3 for the minimum order quantity. CAT.8100V