NICHICON UWX1C470MCL1GB

ALUMINUM ELECTROLYTIC CAPACITORS
WX
5.5mmL Chip Type
series
Chip type with 5.5mm height.
Designed for surface mounting on high density PC board.
Applicable to automatic mounting machine fed with carrier tape.
Load life of 2000 hours at 85°C.
WT
Compliant to the RoHS directive (2002/95/EC).
WJ
High
Temperature
High
Te m p reflow
WX
WP
Bi-polarized
Smaller
Specifications
ZS
Item
Performance Characteristics
Category Temperature Range
– 40 to +85°C
Rated Voltage Range
4 to 50V
Rated Capacitance Range
0.1 to 330µF
Capacitance Tolerance
± 20% at 120Hz, 20°C
Leakage Current
After 2 minutes' application of rated voltage, leakage current is not more than 0.01CV or 3 (µA) ,whichever is greater.
Measurement frequency : 120Hz at 20°C
Tangent of loss angle (tan δ)
Rated voltage (V)
tan δ (MAX.)
4
6.3
10
16
25
35
50
0.35 (0.40)
0.26 (0.30)
0.20 (0.24)
0.16 (0.19)
0.14 (0.16)
0.12 (0.14)
0.12 (0.14)
Values in ( ) applicable to WR, φ3 case size.
Measurement frequency : 120Hz
4
7
15
Rated voltage (V)
Z– 25°C / Z+20°C
Z– 40°C / Z+20°C
Stability at Low Temperature
Impedance ratio
ZT / Z20 (MAX.)
6.3
4
8
10
3
8
16
2
4
25
2
4
35
2
3
50
2
3
Endurance
The specifications listed at right shall be met
when the capacitors are restored to 20°C after
the rated voltage is applied for 2000 hours at
85°C.
Shelf Life
After storing the capacitors under no load at 85°C for 1000 hours and then performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Resistance to soldering
heat
The capacitors are kept on a hot plate for 30 seconds, which is
maintained at 250°C. The capacitors shall meet the
characteristic requirements listed at right when they are
removed from the plate and restored to 20°C.
Marking
Black print on the case top.
Chip Type
Within ±10% of the initial capacitance value
Less than or equal to the initial specified value
Less than or equal to the initial specified value
Type numbering system (Example : 16V 10µF)
0.5 MAX.
B±0.2
C±0.2
5.4
1
+0.1
–0.2
2
3
4
5
6
7
8
9 10 11 12 13 14
UWX 1 C 1 0 0 MC L 1 G B
Taping code
A±0.2 A±0.2
Plastic platform
0.3 MAX.
E
1 Voltage
φD±0.5
A2
10
16V
Capacitance change
tan δ
Leakage current
Positive
Capacitance
2 Lot No.
Within ±20% of the initial capacitance value (Within ±25% for 4 V and φ3,WR series units)
200% or less than the initial specified value
Less than or equal to the initial specified value
Capacitance change
tan δ
Leakage Current
Size code
Configuration
Capacitance toleranc (±20%)
Rated capacitance (10µF)
Negative
0.5 to 0.8
φD
A
B
C
E
3
1.5
3.3
3.3
0.8
4
1.8
4.3
4.3
1.0
5
2.1
5.3
5.3
1.3
(mm)
6.3 8
2.4 3.3
6.6 8.3
6.6 8.3
2.2 2.3
φD
Code
3
2
4 to 8
1
Rated voltage (16V)
Series name
Type
• In the case of size φ3 in (
),parentheses, use WX in the 2nd and 3rd
digit and put a 2 in the 12th digit of type numbering system.
1. Voltage mark for 6.3V is 6V .
In case of marking for φ3 units, “V” for rated voltage is omitted.
2. In case of marking for φ3 units, Lot No.is expressed by a digit (month code).
Dimension table in next page.
CAT.8100B
ALUMINUM ELECTROLYTIC CAPACITORS
WX
series
Dimensions
4
0G
V
Cap. (µF)
Code
6.3
0J
10
1A
16
1C
25
1E
35
1V
0.1
0R1
4 (3)
1.0
0.22
R22
4 (3)
2.0
0.33
R33
4 (3)
2.8
0.47
R47
4 (3)
4.0
1
010
4 (3)
2.2
2R2
3.3
3R3
4.7
4R7
3
3
10
4
17
16 (12)
4
18
5
20 (18)
5
27 (24)
5
29 (24)
6.3
33 (30)
33 (30)
5
37 (30)
6.3
42 (38)
6.3
46 (39)
8
52 (43)
5
41 (34)
6.3
49 (44)
6.3
52 (46)
8
62 (53)
8
71
45 (40)
6.3
52 (47)
6.3
58 (52)
8
70 (60)
8
80
22
220
3
019
4 (3)
28 (21)
5
33
330
4
028
5
37 (34)
47
470
4
033
5
56
560
5
042
6.3
52 (46)
6.3
57 (50)
6.3
63 (57)
8
100
101
5
056
6.3
70 (47)
6.3
76 (54)
6.3
86
8
150
151
6.3
079
6.3
220
221
6.3
096
8
110 (74)
330
331
8
145
8
170
71
8
111 (76)
8
135
76 (65)
110
),parentheses, use WX at 2nd and 3rd digit and put 2 at the 12th digit of type numbering system.
}
8.4 (8.0)
13 (10)
23 (18)
100
Size φ4 is available for capacitors marked. " "
Size φ5 is available for capacitors marked. " "
Size φ6.3 is available for capacitors marked. " "
4 (3)
4 (3)
10
In the case of size φ3 in (
8.4
4 (3)
( ) is also available with φ3mm upon request.
•
50
1H
Case size Rated
φ D (mm) ripple
Rated ripple current (mArms) at 85°C 120Hz
( ) = φ3 units and WR Series
In such a case, W R will be put at 2nd and 3rd digit of type numbering system.
Frequency coefficient of rated ripple current
Frequency
Coefficient
50 Hz
0.70
120 Hz
1.00
300 Hz
1.17
1 kHz
1.36
10 kHz or more
1.50
Taping specifications are given in page 23.
Recommended land size, soldering by reflow are given
in page 18, 19.
Please select UR(p.106), UG(p.114) series if high C/V
products are reqired.
Please refer to page 3 for the minimum order quantity.
CAT.8100B