SD3000C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 3800 A FEATURES • Wide current range • High voltage ratings up to 1000 V RoHS COMPLIANT • High surge current capabilities • Diffused junction • Hockey PUK version DO-200AC (K-PUK) • Case style DO-200AC (K-PUK) • Lead (Pb)-free TYPICAL APPLICATIONS PRODUCT SUMMARY • Converters IF(AV) 3800 A • Power supplies • High power drives • Auxiliary system supplies for traction applications MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) Ths IF(RMS) Ths IFSM I2 t VRRM VALUES UNITS 3800 A 55 °C 6230 A 25 °C 50 Hz 35 800 60 Hz 37 500 50 Hz 6410 60 Hz 5850 Range 400 to 1000 V - 40 to 180 °C TJ A kA2s ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 04 400 500 SD3000C..K Document Number: 93543 Revision: 14-May-08 08 800 900 10 1000 1100 For technical questions, contact: [email protected] IRRM MAXIMUM AT TJ = 180 °C mA 75 www.vishay.com 1 SD3000C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 3800 A FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at heatsink temperature TEST CONDITIONS 180° conduction, half sine wave Double side (single side) cooled IF(AV) Maximum RMS forward current 25 °C heatsink temperature double side cooled IF(RMS) t = 10 ms Maximum peak, one-cycle forward, non-repetitive surge current t = 8.3 ms IFSM t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing t = 8.3 ms I2t t = 10 ms Maximum I2√t for fusing No voltage reapplied A 55 (85) °C 6230 35 800 No voltage reapplied 100 % VRRM reapplied UNITS 3800 (1925) 37 500 A 30 100 Sinusoidal half wave, initial TJ = TJ maximum 31 500 6410 5850 4530 100 % VRRM reapplied 4135 t = 0.1 to 10 ms, no voltage reapplied 64 100 t = 8.3 ms I2√t VALUES Low level value of threshold voltage VF(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.74 High level value of threshold voltage VF(TO)2 (I > π x IF(AV)), TJ = TJ maximum 0.86 kA2s kA2√s V Low level value of forward slope resistance rf1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.08 High level value of forward slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.07 VFM Ipk = 6000 A, TJ = TJ maximum tp = 10 ms sinusoidal wave 1.22 V VALUES UNITS mΩ Maximum forward voltage drop THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink TEST CONDITIONS TJ - 40 to 180 TStg - 55 to 200 RthJ-hs DC operation single side cooled 0.042 DC operation double side cooled 0.020 Mounting force, ± 10 % Approximate weight Case style See dimensions - link at the end of datasheet °C K/W 22 250 (2250) N (kg) 425 g DO-200AC (K-PUK) ΔRthJ-hs CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION SINGLE SIDE DOUBLE SIDE RECTANGULAR CONDUCTION SINGLE SIDE DOUBLE SIDE 180° 0.002 0.002 0.001 0.001 120° 0.002 0.002 0.002 0.002 90° 0.003 0.003 0.003 0.003 60° 0.004 0.004 0.004 0.004 30° 0.007 0.007 0.007 0.007 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note • The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 93543 Revision: 14-May-08 SD3000C..K Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 3800 A SD 3 0 0 0 C ..K Se rie s (Sin g le S id e C o o le d ) R thJ-hs (D C ) = 0 .0 4 2 K / W 160 140 120 C o nd uctio n A ng le 100 80 30 ° 6 0° 90° 60 120° 180 ° 40 0 50 0 1 00 0 1 5 00 2 0 00 2 50 0 180 M a x im u m A llo w a b le H e a t sin k T e m p e ra t u re ( °C ) M a x im um A llo w a b le H e a t sink T e m p e ra tu re (°C ) 180 S D 3 0 0 0 C ..K S e rie s (D o u b le S id e C o o le d ) R th J- hs (D C ) = 0 .0 2 0 K / W 160 140 120 C o nduc tio n Perio d 100 80 60 90° 60° 40 30° 0 DC 10 0 0 20 0 0 3 0 00 40 0 0 5 00 0 60 00 7 0 00 A v e ra g e F o rw a rd C u rre n t (A ) Fig. 4 - Current Ratings Characteristics 7000 SD 3 0 0 0 C ..K Se rie s (Sin g le S id e C o o le d ) R thJ-h s (D C ) = 0 .0 4 2 K / W 160 140 120 C o nduc tion Period 100 80 30° 60 60° 90 ° 1 2 0° 40 1 8 0° DC 20 0 1 0 00 2 00 0 30 0 0 4 00 0 Maximum Average Forward Pow er Loss (W ) 180 M a x im um A llo w a b le H e a t sin k T e m p e ra t ure ( °C ) 1 8 0° 20 A v e ra g e Fo rw a rd C urre n t (A ) Fig. 1 - Current Ratings Characteristics 6000 180° 120° 90° 60° 30° 5000 4000 RMS Lim it 3000 2000 Co n duc tion An g le SD 3000C..K Series TJ = 180°C 1000 0 0 A v e ra g e Fo rw a rd C u rre n t (A ) SD3000C..K Series ( Double Side Cooled) R th J- hs (D C) = 0.020 K/W 160 140 120 Co n duc tio n A ng le 100 80 180° 60 40 30° 60° 90° 120° 20 0 1000 2000 3000 4000 Average Forward Curren t (A) Fig. 3 - Current Ratings Characteristics Document Number: 93543 Revision: 14-May-08 2000 3000 4000 Fig. 5 - Forward Power Loss Characteristics 8000 Maxim um Average Forward Power Loss (W ) 180 1000 Average Forward Current (A) Fig. 2 - Current Ratings Characteristics Maxim um Allowable Heatsin k Tem perature (°C) 120 ° DC 180° 120° 90° 60° 30° 7000 6000 5000 RMS Limit 4000 3000 C o nd uc tio n Perio d 2000 SD 3000C..K Series TJ = 180°C 1000 0 0 1000 2000 3000 4000 5000 6000 7000 Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics For technical questions, contact: [email protected] www.vishay.com 3 SD3000C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 3800 A 40000 At Any Rated Load Con dition An d W ith Rated V R RM Applied Following Surge. In itial TJ = 180 °C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 30000 25000 P e a k H a lf S in e W a v e F o rw a r d C ur re n t (A ) Peak Half Sine W ave Forw ard Current (A) 35000 20000 15000 10000 SD3000C ..K Series 5000 1 10 35000 30000 M a x im u m N o n R e p e t it iv e S urg e C u rre n t V e rs us P u lse T ra in D ura t io n . In it ia l TJ = 1 8 0 °C N o V o lt a g e R e a pp lie d R a te d V RRMR e a p p lie d 25000 20000 15000 10000 100 SD 3 0 0 0 C ..K S e rie s 5000 0.01 0.1 1 Pu lse T ra in D u ra t io n (s) Num be r O f E qu al A m p litu de Ha lf C yc le Cu rre nt Pu lse s (N ) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Instan taneous Forward Current (A) 100000 TJ = 25°C 10000 TJ = 180°C 1000 SD 3000C..K Series 100 0.5 1 1.5 2 2.5 3 3.5 Instantan eous Forw ard V oltage (V) Fig. 9 - Forward Voltage Drop Characteristics T ran sie n t T h e rm a l Im p e d a n c e Z thJ-hs ( K / W ) 0 .1 St e a d y St a t e V a lu e R thJ-hs = 0 .0 4 2 K / W (Sin gle Sid e C o o le d ) 0 .0 1 R thJ-hs = 0 .0 2 0 K / W ( D o u b le S id e C o o le d) ( D C O p e ra t io n ) 0 .0 0 1 S D 3 0 0 0 C ..K Se rie s 0 .0 0 0 1 0 .0 0 1 0 .0 1 0 .1 1 10 10 0 S q ua re W a v e Pu lse D ura t io n ( s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 93543 Revision: 14-May-08 SD3000C..K Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 3800 A ORDERING INFORMATION TABLE Device code SD 300 0 C 10 K 1 2 3 4 5 6 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - C = Ceramic PUK 5 - Voltage code x 100 = VRRM (see Voltage Ratings table) 6 - K = PUK case DO-200AC (K-PUK) LINKS TO RELATED DOCUMENTS Dimensions Document Number: 93543 Revision: 14-May-08 http://www.vishay.com/doc?95247 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1