MURHF860CT Preferred Device SWITCHMODEt Power Rectifier These state‐of‐the‐art SWITCHMODE power rectifiers are designed for use in switching power supplies, inverters and as free wheeling diodes. http://onsemi.com Features •Ultrafast 35 Nanosecond Recovery Times •150°C Operating Junction Temperature •Electrically Isolated. No Isolation Hardware Required •Epoxy Meets UL 94 V-0 @ 0.125 in •High Temperature Glass Passivated Junction •High Voltage Capability to 600 V •Low Leakage Specified @ 150°C Case Temperature •Pb-Free Package is Available* ULTRAFAST RECTIFIER 8.0 AMPERES, 600 VOLTS 3 2 1 MARKING DIAGRAM Mechanical Characteristics: •Case: Epoxy, Molded •Weight: 1.9 Grams (Approximately) •Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable •Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds ISOLATED TO-220 CASE 221D STYLE 3 MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 600 V Average Rectified Forward Current (Rated VR, TC = 120°C) Total Device IF(AV) 4.0 8.0 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz, TC = 120°C) IFM 16 A Non-Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM 100 A TJ, Tstg - 65 to +150 °C Operating Junction and Storage Temperature Range 1 2 3 A Y WW UH860 G AKA MURHF860CT Rating Symbol Value Unit Max Thermal Resistance, Junction-to-Case RqJC 4.1 °C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. = Assembly Location = Year = Work Week = Device Code = Pb-Free Package = Diode Polarity ORDERING INFORMATION Device THERMAL CHARACTERISTICS (Per Leg) AYWW UH860G AKA MURHF860CTG Package Shipping TO-220 50 Units/Rail TO-220 (Pb-Free) 50 Units/Rail Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 June, 2007 - Rev. 5 1 Publication Order Number: MURHF860CT/D MURHF860CT ELECTRICAL CHARACTERISTICS (Per Leg) Characteristic Symbol Maximum Instantaneous Forward Voltage (Note 1) (iF = 4.0 A, TC = 150°C) (iF = 4.0 A, TC = 25°C) vF Maximum Instantaneous Reverse Current (Note 1) (Rated DC Voltage, TC = 150°C) (Rated DC Voltage, TC = 25°C) iR Maximum Reverse Recovery Time (IF = 1.0 A, di/dt = 50 A/ms) trr Value Unit V 2.5 2.8 mA 500 10 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0% http://onsemi.com 2 35 ns MURHF860CT PACKAGE DIMENSIONS TO-220 FULLPAK CASE 221D-03 ISSUE J SEATING PLANE -T-B- F C S Q NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH 3. 221D-01 THRU 221D-02 OBSOLETE, NEW STANDARD 221D-03. U A 1 2 3 H -Y- K G N L D J R 3 PL 0.25 (0.010) M B M DIM A B C D F G H J K L N Q R S U INCHES MIN MAX 0.617 0.635 0.392 0.419 0.177 0.193 0.024 0.039 0.116 0.129 0.100 BSC 0.118 0.135 0.018 0.025 0.503 0.541 0.048 0.058 0.200 BSC 0.122 0.138 0.099 0.117 0.092 0.113 0.239 0.271 MILLIMETERS MIN MAX 15.67 16.12 9.96 10.63 4.50 4.90 0.60 1.00 2.95 3.28 2.54 BSC 3.00 3.43 0.45 0.63 12.78 13.73 1.23 1.47 5.08 BSC 3.10 3.50 2.51 2.96 2.34 2.87 6.06 6.88 STYLE 3: PIN 1. ANODE 2. CATHODE 3. ANODE Y SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MURHF860CT/D