ONSEMI MURHF860CTG

MURHF860CT
Preferred Device
SWITCHMODEt
Power Rectifier
These state-of-the-art SWITCHMODE power rectifiers are
designed for use in switching power supplies, inverters and as free
wheeling diodes.
http://onsemi.com
Features
•
•
•
•
•
•
•
•
ULTRAFAST RECTIFIER
8.0 AMPERES, 600 VOLTS
Ultrafast 35 Nanosecond Recovery Times
150°C Operating Junction Temperature
Electrically Isolated. No Isolation Hardware Required
Epoxy Meets UL 94 V−0 @ 0.125 in
High Temperature Glass Passivated Junction
High Voltage Capability to 600 V
Low Leakage Specified @ 150°C Case Temperature
Pb−Free Package is Available*
3
2
1
MARKING
DIAGRAM
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.9 Grams (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max for 10 Seconds
ISOLATED TO−220
CASE 221D
STYLE 3
MAXIMUM RATINGS (Per Leg)
Rating
Symbol
Value
Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
600
V
Average Rectified Forward Current
(Rated VR, TC = 120°C) Total Device
IF(AV)
4.0
8.0
A
Peak Repetitive Forward Current
(Rated VR, Square Wave,
20 kHz, TC = 120°C)
IFM
16
A
Non−Repetitive Peak Surge Current
(Surge Applied at Rated Load Conditions
Halfwave, Single Phase, 60 Hz)
IFSM
100
A
Operating Junction and Storage Temperature Range
TJ, Tstg
−65 to +150
°C
Rating
Symbol
Value
Unit
Max Thermal Resistance, Junction−to−Case
RqJC
4.1
°C/W
1
2
3
A
Y
WW
UH860
G
AKA
MURHF860CT
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
= Assembly Location
= Year
= Work Week
= Device Code
= Pb−Free Package
= Diode Polarity
ORDERING INFORMATION
Device
THERMAL CHARACTERISTICS (Per Leg)
AYWW
UH860G
AKA
MURHF860CTG
Package
Shipping
TO−220
50 Units/Rail
TO−220
(Pb−Free)
50 Units/Rail
Preferred devices are recommended choices for future use
and best overall value.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2006
April, 2006 − Rev. 4
1
Publication Order Number:
MURHF860CT/D
MURHF860CT
ELECTRICAL CHARACTERISTICS (Per Leg)
Characteristic
Symbol
Maximum Instantaneous Forward Voltage (Note 1)
(iF = 4.0 A, TC = 150°C)
(iF = 4.0 A, TC = 25°C)
vF
Maximum Instantaneous Reverse Current (Note 1)
(Rated DC Voltage, TC = 150°C)
(Rated DC Voltage, TC = 25°C)
iR
Maximum Reverse Recovery Time
(IF = 1.0 A, di/dt = 50 A/ms)
trr
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%
http://onsemi.com
2
Value
2.5
2.8
500
10
35
Unit
V
mA
ns
MURHF860CT
PACKAGE DIMENSIONS
TO−220 FULLPAK TRANSISTOR
CASE 221D−03
ISSUE G
−T−
−B−
F
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH
3. 221D−01 THRU 221D−02 OBSOLETE, NEW
STANDARD 221D−03.
SEATING
PLANE
C
S
Q
U
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
U
A
1 2 3
H
−Y−
K
G
N
L
D
J
R
3 PL
0.25 (0.010)
M
B
M
Y
INCHES
MIN
MAX
0.625
0.635
0.408
0.418
0.180
0.190
0.026
0.031
0.116
0.119
0.100 BSC
0.125
0.135
0.018
0.025
0.530
0.540
0.048
0.053
0.200 BSC
0.124
0.128
0.099
0.103
0.101
0.113
0.238
0.258
MILLIMETERS
MIN
MAX
15.88
16.12
10.37
10.63
4.57
4.83
0.65
0.78
2.95
3.02
2.54 BSC
3.18
3.43
0.45
0.63
13.47
13.73
1.23
1.36
5.08 BSC
3.15
3.25
2.51
2.62
2.57
2.87
6.06
6.56
STYLE 3
PIN 1. ANODE
2. CATHODE
3. ANODE
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
3
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
MURHF860CT/D