F-213 TFM–115–02–L–S TFM–110–02–L–D–LC ™ (1,27 mm) .050" SYSTEM TFM–110–01–L–D–RE1–WT TFML–115–12–L–D–K TFM, TFML SERIES SMT & THROUGH-HOLE HEADER SPECIFICATIONS Shrouded body for blind mating TFM Mates with: SFM, SFMC, SFSD For complete specifications and recommended PCB layouts see www.samtec.com?TFM or www.samtec.com?TFML TFML Mates with: SFML, SFSD (–XL option), SFSDT (–XL option) Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au or Sn over 50µ" (1,27 µm) Ni Voltage Rating: 350 VAC mated with SFM Operating Temp Range: -55°C to +125°C RoHS Compliant: Yes TFM-DH Mates with: SFM (-DH), SFMC, SFSDX (–S, -D, -SR, -DR) CURRENT RATING (PER CONTACT) AMBIENT TEMP TFM/SFM 20°C 5A 40°C 4.5A 60°C 3.9A 95°C 2.6A 6 POSITIONS (2x3) POWERED Processing: TM EXTENDED LIFE PRODUCT 10 year Mixed Flowing Gas with 30µ" Gold 1,000 cycles when mated with SFM TYPE STRIP –02 (9,91) .390 (11,81) .465 LEAD STYLE TFM SFM –01 –03 –11 –13 –21 –31 (8,13) .320 MATED HEIGHT* (5,97) .235 (5,97) .235 –01 (7,75) .305 (7,75) .305 (9,53) .375 (11,43) .450 *Processing conditions will affect mated height. Specify LEAD STYLE from chart 05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50 LEAD STYLE (T/H) B COST-SAVING APPLICATIONS (Call Samtec for other sizes) = Locking MATED HEIGHT* (6,35) .250 LEAD STYLE (TFM only) TFML MATED HEIGHT –02 –12 –22 –32 See TFC Series for lower cost plating options. (1,27) .050 x No. of Positions + (3,18) .125 (See website for –DS & –WT OAL) –REX = (1,27) .050 x No. of Positions + (6,68) .263 (2,79) .110 C (5,59) (1,97) .220 .078 (2,77) –03* (5,59) .220 .109 (1,97) (4,45) –11* (7,37) .290 .078 .175 (2,77) –13* (7,37) .290 .109 (9,14) (1,97) –21* .360 .078 (1,97) –31* (11,05) SINGLE ROW .435 .078 * N/A with 07 or -S row option –01 LEAD STYLE (1,27) .050 (1,27) .050 DOUBLE ROW –02 –12* –22* –32* PLATING OPTION –L = 15µ" (0,38 µm) Gold on post, Matte Tin on tail (Call Samtec for E.L.P. plating option) Note: Other Gold plating options available. Contact Samtec. A (SMT) (5,72) .225 (1,14) .045 (5,72) .225 (7,49) .295 (9,27) .365 (11,18) .440 * N/A with 07, -DH or -S row option (1,27) .050 DIA –A (SMT or TH) (0,46) .018 DIA B (1,40) .055 A C Note: Some sizes, styles and options are non-standard, non-returnable. TFM to SFM-SH SHOWN 04, 06, 08 TFM SFM Surface mount or Through-hole tails NO. PINS PER ROW 1 = Standard TFM APPLICATIONS TFM-DH to SFM-DH SHOWN Lead-Free Solderable: Yes SMT Lead Coplanarity: (0,10 mm) .004" max (05-25) (0,15 mm) .006" max (30-50) LEAD STYLE (1,27 mm x 1,27 mm) .050" x .050" micro pitch (0,36) .014 THROUGH-HOLE SURFACE MOUNT WWW.SAMTEC.COM (1,42) .056 –LC (SMT or TH) (0,64) .025 (2,35) .093 –WT (–01 & –02 ONLY) TFM–105–01–L–D–RA TFM–125–01–L–D–WT TFML–150–01–L–D–LC TFM–110–02–L–D–DS TFM–110–02–L–DH–WT Shrouded body for blind mating (1,27 mm) .050" pitch • Passes 10 Year MFG • Locking option Surface mount or Through-hole tails • Locking clip option • Weld tab option Screw down option ROW OPTION Weld tab option • Screw Down option OPTION –S Specify only –RA, –RE1 or –RE2 –RA = Single Row (TFM only) = Right Angle (Lead style –01 only) –D Specify only –A, –LC, –DS or –WT Not available with –RA, –RE1 and –RE2 unless otherwise noted. –A SMT lead styles only Specify only –K or –P –K = Polyimide Film Pick & Place Pad = Alignment Pin = Double Row –RE1 –DH = Right Angle Elevated for (1,58 mm) .062" PCB (Requires TFM lead style –01, –D row and –WT) = Double Horizontal (TFM lead style –02 only) (05 thru 50 positions only) (–WT standard; –TR option only available) (0,76) .030 (2,26) .089 –LC = Locking Clip (Manual Placement required) (1,91) .075 (0,51) .020 –RA (6,48) .255 (1,27) .050 –DS –TR = Dual Screw Down for (1,60 mm) .062" PCB (05, 07, 10, 15, 20, 25, 30, 35, 40 positions only) (TFM lead styles –01 and –02 only) (Requires –D row option) (Mates with SFM–DS option and SFSD/SFSDT –SS and –DS option only) = Tape & Reel (Not available with –DS) –WT = Weld Tab (TFM lead styles –01 and –02 only) (Standard with –DH) (Mates to SFSS/SFSD –SR and –DR option only) (05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50 positions only) (1,99) .079 –DS (–D, –01 & –02 ONLY) –P = Plastic Pick & Place Pad (5 positions minimum) Specify –TR last –RE2 = Right Angle Elevated for (2,36 mm) .093" PCB (Requires TFM lead style –01, –D row and –WT) –DH (3,81) .150 Mates with SFM for coplanar and perpendicular mating APPLICATION SPECIFIC OPTION Solder nail option available. Call Samtec. –RE1 & –RE2 WWW.SAMTEC.COM