STB35N65M5, STF35N65M5, STI35N65M5 STP35N65M5, STW35N65M5 N-channel 650 V, 0.085 Ω, 27 A, MDmesh™ V Power MOSFET in D²PAK, TO-220FP, I²PAK, TO-220, TO-247 Features Type VDSS @ TJMAX RDS(on) max. 710 V 710 V 710 V 710 V 710 V < 0.098 Ω < 0.098 Ω < 0.098 Ω < 0.098 Ω < 0.098 Ω STB35N65M5 STF35N65M5 STI35N65M5 STP35N65M5 STW35N65M5 ID 3 1 27 A 27 A(1) 27 A 27 A 27 A D²PAK TO-220FP 1. Limited only by maximum temperature allowed Worldwide best RDS(on)* area ■ Higher VDSS rating ■ Excellent switching performance ■ Easy to drive ■ 100% avalanche tested ■ High dv/dt capability 2 I²PAK 3 1 ■ 3 12 3 1 2 2 TO-220 Figure 1. 3 1 TO-247 Internal schematic diagram $ Applications ■ Switching applications ' Description These devices are N-channel MDmesh™ V Power MOSFETs based on an innovative proprietary vertical process technology, which is combined with STMicroelectronics’ well-known PowerMESH™ horizontal layout structure. The resulting product has extremely low onresistance, which is unmatched among siliconbased Power MOSFETs, making it especially suitable for applications which require superior power density and outstanding efficiency. Table 1. Device summary 3 !-V Order codes Marking Package Packaging STB35N65M5 STF35N65M5 STI35N65M5 STP35N65M5 STW35N65M5 35N65M5 35N65M5 35N65M5 35N65M5 35N65M5 D²PAK TO-220FP I²PAK TO-220 TO-247 Tape and reel Tube Tube Tube Tube October 2011 Doc ID 15325 Rev 3 1/22 www.st.com 22 Contents STB/F/I/P/W35N65M5 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) .......................... 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2/22 .............................................. 9 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol VGS ID Parameter Unit TO-220, D²PAK TO-247, I²PAK Gate-source voltage TO-220FP ±25 Drain current (continuous) at TC = 25 °C V 27 27 (1) A (1) A Drain current (continuous) at TC = 100 °C 17 17 IDM (2) Drain current (pulsed) 108 108 (1) A PTOT Total dissipation at TC = 25 °C 160 40 W ID IAR Max current during repetitive or single pulse avalanche (pulse width limited by TJMAX) EAS dv/dt (3) 9 A Single pulse avalanche energy (starting Tj = 25°C, ID = IAR, VDD = 50V) 800 mJ Peak diode recovery voltage slope 15 V/ns VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 °C) Tstg Storage temperature Tj 2500 V - 55 to 150 °C 150 °C Max. operating junction temperature 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD ≤ 27 A, di/dt = 400 A/µs, peak VDS < V(BR)DSS Table 3. Thermal data Value Symbol Parameter Unit D²PAK TO-220FP I²PAK TO-220 TO-247 Rthj-case Thermal resistance junctioncase max Rthj-amb Thermal resistance junctionambient max Rthj-pcb Thermal resistance junction-pcb max Tl Maximum lead temperature for soldering purpose 0.78 3.1 0.78 62.5 50 30 Doc ID 15325 Rev 3 °C/W °C/W °C/W 300 °C 3/22 Electrical characteristics 2 STB/F/I/P/W35N65M5 Electrical characteristics (TC = 25 °C unless otherwise specified) Table 4. Symbol V(BR)DSS On /off states Parameter Test conditions Drain-source breakdown voltage ID = 1 mA, VGS = 0 Min. Typ. Max. Unit 650 V IDSS VDS = Max rating Zero gate voltage drain current (VGS = 0) VDS = Max rating, TC=125 °C 1 100 µA µA IGSS Gate-body leakage current (VDS = 0) 100 nA 4 5 V 0.085 0.098 Ω Min. Typ. Max. Unit VGS = ± 25 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance Table 5. Symbol 3 VGS = 10 V, ID = 13.5 A Dynamic Parameter Test conditions Input capacitance Output capacitance Reverse transfer capacitance VDS = 100 V, f = 1 MHz, VGS = 0 - 3750 84 5.5 - pF pF pF Co(tr)(1) Equivalent capacitance time related VGS = 0, VDS = 0 to 520 V - 220 - pF Co(er)(2) Equivalent capacitance energy related VGS = 0, VDS = 0 to 520 V - 75 - pF RG Intrinsic gate resistance f = 1 MHz open drain - 1.6 - Ω Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 520 V, ID = 13.5 A, VGS = 10 V (see Figure 20) - 83 19 35 - nC nC nC Ciss Coss Crss 1. Coss eq. time related is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 2. Coss eq. energy related is defined as a constant equivalent capacitance giving the same stored energy as Coss when VDS increases from 0 to 80% VDSS 4/22 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 Table 6. Symbol td(off) tr tc tf Table 7. Electrical characteristics Switching times Parameter Test conditions Turn-off delay time Rise time Cross time Fall time VDD = 400 V, ID = 16 A, RG = 4.7 Ω, VGS = 10 V (see Figure 21) Parameter ISD ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage IRRM trr Qrr IRRM Typ. - 60 12 28 16 Min. Typ. Max. Unit - ns ns ns ns Source drain diode Symbol trr Qrr Min. Test conditions Max. Unit - 27 108 A A ISD = 27 A, VGS = 0 - 1.5 V Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 27 A, di/dt = 100 A/µs VDD = 60 V (see Figure 24) - 360 7 36 ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 27 A, di/dt = 100 A/µs VDD = 60 V, Tj = 150 °C (see Figure 24) - 425 8 38 ns µC A 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5% Doc ID 15325 Rev 3 5/22 Electrical characteristics STB/F/I/P/W35N65M5 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220, D²PAK Figure 3. Thermal impedance for TO-220, D²PAK Figure 5. Thermal impedance for TO-220FP Figure 7. Thermal impedance for TO-247 AM05411v1 ID (A) Tj=150°C Tc=25°C Sinlge pulse 100 D S( on ) O Li per m at ite io d ni by n m this ax a R rea is 10µs 10 100µs 1ms 10ms 1 0.1 0.1 Figure 4. 1 10 100 VDS(V) Safe operating area for TO-220FP AM05412v1 ID (A) Tj=150°C Tc=25°C Sinlge pulse 100 10 is ea ar (on) s S i D th in ax R ion m at by r e d Op ite Lim 10µs 100µs 1ms 10ms 1 0.1 0.01 0.1 Figure 6. 1 10 100 VDS(V) Safe operating area for TO-247 AM05413v1 ID (A) Tj=150°C Tc=25°C Sinlge pulse 100 10 is ea ) ar S(on is D th R in ax n m tio by ra pe ed O imit L 10µs 100µs 1ms 10ms 1 0.1 0.1 6/22 1 10 100 VDS(V) Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 Figure 8. Electrical characteristics Output characteristics Figure 9. AM05414v1 ID (A) VGS=10V Transfer characteristics AM05415v1 ID (A) VDS=10V 50 50 40 40 6V 30 30 20 20 10 10 5V 0 0 5 10 20 15 25 30 0 0 VDS(V) 2 4 8 6 10 VGS(V) Figure 10. Gate charge vs gate-source voltage Figure 11. Static drain-source on resistance AM05420v1 VGS (V) 12 VGS VDD=520V ID=13.5A VDS 480 AM05417v1 RDS(on) (Ω) ID=13.5A VGS=10V 0.10 0.09 10 400 8 320 6 240 4 160 2 80 0.04 0 Qg(nC) 0.03 0 0.08 0.07 0 50 0 100 Figure 12. Capacitance variations 0.05 5 10 15 20 25 ID(A) Figure 13. Output capacitance stored energy AM05418v1 C (pF) 0.06 AM05419v1 Eoss (µJ) 16 10000 Ciss 14 12 1000 10 8 100 Coss 4 10 Crss 1 0.1 6 1 10 100 VDS(V) Doc ID 15325 Rev 3 2 0 0 100 200 300 400 500 600 VDS(V) 7/22 Electrical characteristics STB/F/I/P/W35N65M5 Figure 14. Normalized gate threshold voltage vs temperature AM05422v1 VGS(th) (norm) 1.10 Figure 15. Normalized on resistance vs temperature AM05423v1 RDS(on) (norm) 2.1 1.9 1.7 1.00 1.5 1.3 0.90 1.1 0.80 0.9 0.7 0.70 -50 -25 25 0 50 TJ(°C) 75 100 Figure 16. Source-drain diode forward characteristics 0 25 50 75 100 TJ(°C) Figure 17. Normalized BVDSS vs temperature AM05424v1 VSD (V) 0.5 -50 -25 TJ=-50°C AM05416v1 BVDSS (norm) 1.2 1.07 1.0 1.05 1.03 0.8 TJ=25°C 1.01 0.6 0.99 TJ=150°C 0.4 0.97 0.2 0.95 0 0 10 30 20 40 50 ISD(A) 0.93 -50 -25 Figure 18. Switching losses vs gate resistance (1) E (μJ) 400 AM05421v1 ID=15A VGS=10V VCL=400V Eon 350 300 Eoff 250 200 150 100 50 0 0 10 20 30 40 RG(Ω) 1. Eon including reverse recovery of a SiC diode 8/22 Doc ID 15325 Rev 3 0 25 50 75 100 125 TJ(°C) STB/F/I/P/W35N65M5 3 Test circuits Test circuits Figure 19. Switching times test circuit for resistive load Figure 20. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 21. Test circuit for inductive load Figure 22. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 23. Unclamped inductive waveform V(BR)DSS AM01471v1 Figure 24. Switching time waveform Concept waveform for Inductive Load Turn-off Id VD 90%Vds 90%Id Tdelay-off -off IDM Vgs 90%Vgs on ID Vgs(I(t)) )) VDD VDD 10%Id 10%Vds Vds Trise AM01472v1 Doc ID 15325 Rev 3 Tfall Tcross --over AM05540v2 9/22 Package mechanical data 4 STB/F/I/P/W35N65M5 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/22 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 Table 8. Package mechanical data D²PAK (TO-263) mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 0.4 0° 8° Doc ID 15325 Rev 3 11/22 Package mechanical data STB/F/I/P/W35N65M5 Figure 25. D²PAK (TO-263) drawing 0079457_S Figure 26. D²PAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 a. All dimensions are in millimeters 12/22 Doc ID 15325 Rev 3 Footprint STB/F/I/P/W35N65M5 Table 9. Package mechanical data TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 Figure 27. TO-220FP drawing L7 E A B D Dia L5 L6 F1 F2 F G H G1 L4 L2 L3 7012510_Rev_K Doc ID 15325 Rev 3 13/22 Package mechanical data Table 10. STB/F/I/P/W35N65M5 I²PAK (TO-262) mechanical data mm. DIM. min. typ max. A 4.40 4.60 A1 2.40 2.72 b 0.61 0.88 b1 1.14 1.70 c 0.49 0.70 c2 1.23 1.32 D 8.95 9.35 e 2.40 2.70 e1 4.95 5.15 E 10 10.40 L 13 14 L1 3.50 3.93 L2 1.27 1.40 Figure 28. I²PAK (TO-262) drawing 0004982_Rev_H 14/22 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 Table 11. Package mechanical data TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 15325 Rev 3 15/22 Package mechanical data STB/F/I/P/W35N65M5 Figure 29. TO-220 type A drawing 0015988_typeA_Rev_S 16/22 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 Table 12. Package mechanical data TO-247 mechanical data mm Dim. Min. Typ. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 ∅P 3.55 3.65 ∅R 4.50 5.50 S 5.50 Doc ID 15325 Rev 3 17/22 Package mechanical data STB/F/I/P/W35N65M5 Figure 30. TO-247 drawing 0075325_F 18/22 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 5 Packaging mechanical data Packaging mechanical data Table 13. D²PAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 Doc ID 15325 Rev 3 Min. Max. 330 13.2 26.4 30.4 19/22 Packaging mechanical data STB/F/I/P/W35N65M5 Figure 31. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 32. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 20/22 Doc ID 15325 Rev 3 STB/F/I/P/W35N65M5 6 Revision history Revision history Table 14. Document revision history Date Revision 29-Jul-2009 1 First release 01-Sep-2009 2 Figure 10 has been updated 3 Co(er) and Co(tr) values changed in Table 5: Dynamic Table 6: Switching times parameters updates Figure 24: Switching time waveform has been corrected Minor text changes Section 4: Package mechanical data has been modified. Added: – Table 8: D²PAK (TO-263) mechanical data, Figure 25: D²PAK (TO263) drawing and Figure 26: D²PAK footprint; – Table 9: TO-220FP mechanical data,and Figure 27: TO-220FP drawing; – Table 10: I²PAK (TO-262) mechanical data,and Figure 28: I²PAK (TO-262) drawing; – Table 11: TO-220 type A mechanical data,and Figure 29: TO-220 type A drawing; – Table 12: TO-247 mechanical data,and Figure 30: TO-247 drawing; Section 5: Packaging mechanical data has been modified. Added: – Table 13: D²PAK (TO-263) tape and reel mechanical data, Figure 31: Tape and Figure 32: Reel; 06-Oct-2011 Changes Doc ID 15325 Rev 3 21/22 STB/F/I/P/W35N65M5 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 22/22 Doc ID 15325 Rev 3