STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND N-channel 600 V, 0.097 Ω typ., 29 A FDmesh™ II Power MOSFET (with fast diode) in D2PAK, TO-220FP, TO-220 and TO-247 Datasheet — production data Features TAB Order codes VDSS @TJ max. RDS(on) max. ID 3 STB34NM60ND STF34NM60ND STP34NM60ND STW34NM60ND 1 650 V 0.110 Ω D2PAK 29 A 2 TO-220FP TAB ■ The world’s best RDS(on) in TO-220 amongst the fast recovery diode devices ■ 100% avalanche tested 3 ■ Low input capacitance and gate charge ■ Low gate input resistance ■ Extremely high dv/dt and avalanche capabilities 1 2 2 3 1 TO-220 Applications ■ 3 1 Figure 1. TO-247 Internal schematic diagram Switching applications $4!" Description These FDmesh™ II Power MOSFETs with intrinsic fast-recovery body diode are produced using the second generation of MDmesh™ technology. Utilizing a new strip-layout vertical structure, these revolutionary devices feature extremely low on-resistance and superior switching performance. They are ideal for bridge topologies and ZVS phase-shift converters. ' 3 !-V Table 1. Device summary Order codes Marking Package Packaging STB34NM60ND STF34NM60ND STP34NM60ND STW34NM60ND 34NM60ND 34NM60ND 34NM60ND 34NM60ND D2PAK TO-220FP TO-220 TO-247 Tape and reel Tube Tube Tube October 2012 This is information on a product in full production. Doc ID 18099 Rev 5 1/22 www.st.com 22 Contents STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 Test circuits 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 2/22 .............................................. 9 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter D2PAK, TO-220, TO-247 Unit TO-220FP VDS Drain-source voltage 600 V VGS Gate- source voltage ± 25 V ID Drain current (continuous) at TC = 25 °C 29 29(1) A ID Drain current (continuous) at TC = 100 °C 18 18(1) A IDM (2) Drain current (pulsed) 116 116(1) A PTOT Total dissipation at TC = 25 °C 190 40 W VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1 s;TC=25 °C) 2500 V dv/dt(3) Peak diode recovery voltage slope Tstg TJ 40 Storage temperature V/ns - 55 to 150 °C Max. operating junction temperature 150 1. Current limited by package 2. Pulse width limited by safe operating area 3. ISD ≤ 29 A, di/dt ≤ 600 A/µs, VDD = 80% V(BR)DSS,VDSPeak < V(BR)DSS Table 3. Symbol Thermal data Parameter Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max TO-220 TO-247 D2PAK TO-220FP Rthj-pcb(1) Thermal resistance junction-pcb max 62.5 Unit 0.66 3.1 °C/W 50 62.5 °C/W 30 °C/W 1. When mounted on FR-4 board of 1 inch², 2 oz Cu. Table 4. Symbol Avalanche characteristics Parameter Max value Unit IAR Avalanche current, repetitive or notrepetitive (pulse width limited by TJ max) 7 A EAS Single pulse avalanche energy (starting TJ = 25 °C, ID = IAR, VDD = 50 V) 345 mJ Doc ID 18099 Rev 5 3/22 Electrical characteristics 2 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 5. Symbol V(BR)DSS On/off states Parameter Test conditions Drain-source I = 1 mA breakdown voltage (VGS = 0) D Min. Typ. Max. Unit 600 V IDSS Zero gate voltage drain current (VGS = 0) VDS = 600 V VDS = 600 V, TC=125 °C 1 100 µA µA IGSS Gate-body leakage current (VDS = 0) VGS = ± 25 V ±100 nA VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA 5 V RDS(on) Static drain-source on resistance VGS = 10 V, ID = 14.5 A Table 6. Symbol 3 4 Ω 0.097 0.110 Dynamic Parameter Test conditions Min. Typ. Max. Unit - pF pF pF - pF Input capacitance Output capacitance Reverse transfer capacitance VDS = 50 V, f = 1 MHz, VGS = 0 - 2785 168 5 Coss eq.(1) Equivalent output capacitance VGS = 0, VDS = 0 to 480 V - 43.8 td(on) tr td(off) tf Turn-on delay time Rise time Turn-off delay time Fall time VDD =300 V, ID = 14.5 A RG = 4.7 Ω, VGS = 10 V (see Figure 18 and 23) - 30 53.4 111 61.8 - ns ns ns ns Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 480 V, ID = 29 A, VGS = 10 V, (see Figure 19) - 80.4 16 41.4 - nC nC nC Rg Gate input resistance f=1 MHz , open drain - 2.87 - Ω Ciss Coss Crss 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/22 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Table 7. Symbol Electrical characteristics Source drain diode Parameter Test conditions Min. Typ. Max. Unit - 29 116 A A 1.6 V ISD ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 29 A, VGS = 0 - Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 29 A, VDD = 60 V di/dt=100 A/µs (see Figure 20) - 175 1.4 16 ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 29 A,VDD = 60 V di/dt=100 A/µs, TJ = 150 °C (see Figure 20) - 255 2.6 20 ns µC A trr Qrr IRRM trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5%. Doc ID 18099 Rev 5 5/22 Electrical characteristics STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220FP Figure 3. Thermal impedance for TO-220FP AM09018v1 ID (A) Tj=150°C Tc=25°C Single pulse 100 10 1 his t in a ion m at by r e d Op mite Li is ea ar (on) DS xR 10µs 100µs 1ms 10ms 0.1 0.01 0.1 Figure 4. 10 1 100 VDS(V) Safe operating area for TO-220 and Figure 5. D2PAK Thermal impedance for TO-220 and D2PAK AM09017v1 ID (A) Tj=150°C Tc=25°C Single pulse ) on D S( O Li per m at ite io d ni by n m this ax a R rea is 100 10 10µs 100µs 1ms 10ms 1 0.1 0.1 Figure 6. 10 1 100 VDS(V) Safe operating area for TO-247 Figure 7. AM09019v1 ID (A) Tj=150°C Tc=25°C Single pulse 100 is ea ) ar S(on t RD in ax n it o y m b ra pe ed O mit i L 10µs s hi 10 100µs 1ms 10ms 1 0.1 0.1 6/22 1 10 100 VDS(V) Doc ID 18099 Rev 5 Thermal impedance for TO-247 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 8. Output characteristics Figure 9. Electrical characteristics Transfer characteristics AM08229v1 ID (A) AM00889v1 ID (A) 80 VGS=10V VDS=20V 80 7V 70 70 60 60 6V 50 50 40 40 30 30 20 20 5V 10 10 0 0 5 10 20 15 25 30 0 0 VDS(V) 2 4 8 6 10 VGS(V) Figure 10. Gate charge vs gate-source voltage Figure 11. Static drain-source on resistance AM08231v1 VDS VGS (V) VDS (V) VDD=480V ID=29A 12 500 AM08232v1 RDS(on) (Ω) 0.102 VGS=10V 0.100 10 400 0.098 8 300 0.096 6 200 4 100 2 0 0 0 10 20 30 40 50 60 70 80 90 Qg(nC) Figure 12. Capacitance variations 0.092 0.090 0 4 8 12 16 20 24 28 ID(A) Figure 13. Output capacitance stored energy AM08233v1 C (pF) 0.094 AM08234v1 Eoss (µJ) 16 10000 Ciss 14 12 1000 10 Coss 100 8 6 10 4 Crss 1 0.1 1 10 100 VDS(V) Doc ID 18099 Rev 5 2 0 0 100 200 300 400 500 600 VDS(V) 7/22 Electrical characteristics STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on resistance vs temperature AM08235v1 VGS(th) (norm) AM08236v1 RDS(on) (norm) ID=250µA ID=14.5A 2.1 1.10 1.9 1.7 1.00 1.5 1.3 0.90 1.1 0.9 0.80 0.7 0.70 -50 -25 0 25 50 75 100 0.5 -50 -25 TJ(°C) Figure 16. Normalized BVDSS vs temperature 75 100 TJ(°C) !-V 4J # 1.08 96'>9@ 1.06 1.04 1.02 8/22 50 ID=1mA 1.10 4J # 4J # 1.00 0.98 0.96 0.94 0.92 -50 -25 25 Figure 17. Source-drain diode forward vs temperature AM09028v1 VDS (norm) 0 0 25 50 75 100 TJ(°C) Doc ID 18099 Rev 5 ,6'>$@ STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND 3 Test circuits Test circuits Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 22. Unclamped inductive waveform AM01471v1 Figure 23. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 Doc ID 18099 Rev 5 10% AM01473v1 9/22 Package mechanical data 4 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 10/22 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Table 8. Package mechanical data D²PAK (TO-263) mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 0.4 0° 8° Doc ID 18099 Rev 5 11/22 Package mechanical data STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 24. D²PAK (TO-263) drawing 0079457_T Figure 25. D²PAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 a. All dimension are in millimeters 12/22 Doc ID 18099 Rev 5 Footprint STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Table 9. Package mechanical data TO-220FP mechanical data mm Dim. Min. Typ. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 Doc ID 18099 Rev 5 13/22 Package mechanical data STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 26. TO-220FP drawing 7012510_Rev_K_B 14/22 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Table 10. Package mechanical data TO-220 type A mechanical data mm Dim. Min. Typ. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 18099 Rev 5 15/22 Package mechanical data STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 27. TO-220 type A drawing 0015988_typeA_Rev_S 16/22 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Table 11. Package mechanical data TO-247 mechanical data mm. Dim. Min. Typ. Max. A 4.85 5.15 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e 5.30 L 14.20 14.80 L1 3.70 4.30 5.45 L2 5.60 18.50 ∅P 3.55 3.65 ∅R 4.50 5.50 S 5.30 5.50 Doc ID 18099 Rev 5 5.70 17/22 Package mechanical data STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 28. TO-247 drawing 0075325_G 18/22 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND 5 Packaging mechanical data Packaging mechanical data Table 12. D²PAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 Doc ID 18099 Rev 5 Min. Max. 330 13.2 26.4 30.4 19/22 Packaging mechanical data STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Figure 29. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 30. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 20/22 Doc ID 18099 Rev 5 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND 6 Revision history Revision history Table 13. Document revision history Date Revision 04-Nov-2010 1 Initial release. 18-Apr-2011 2 Corrected EAS value in Table 4: Avalanche characteristics 14-Sep-2011 3 Added order code in D2PAK and TO-220FP Updated Table 1: Device summary, Table 2: Absolute maximum ratings and Table 3: Thermal data. Updated Section 4: Package mechanical data. Added Section 5: Packaging mechanical data. Minor text changes. 29-Dec-2011 4 Updated description in cover page. 5 Updated title on the cover page. Updated figures 10, 11, 16 and 17. Updated Section 4: Package mechanical data. Minor text changes. 01-Oct-2012 Changes Doc ID 18099 Rev 5 21/22 STB34NM60ND, STF34NM60ND, STP34NM60ND, STW34NM60ND Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 22/22 Doc ID 18099 Rev 5