DESCRIPTION F EC11418 BY APPD DATE 2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16. DAO REV DAO 1/07/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 20 AMPS 5. SUGGESTED FOR USE WITH 14 AWG WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .218 5.54 ACROSS FLATS .187 4.75 .144 3.66 .250 6.35 .275 6.99 .095 2.41 .275 6.99 CATALOG P/N: 01208 .085 2.16 MAX RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 8:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN EJW APPROVED JM DMF029 B DATE APPROVED 05/05/98 PRP DATE APPROVED 05/05/98 XXX DATE 05/05/98 DATE XX/XX/XX RIGHT ANGLE SOLDER MOUNT POWERSNAP A SD01208 SHT OF 1 1 REV F