DESCRIPTION F ECR 8954 2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16. BY APPD DATE PSM REV PSM 05/31/06 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 40 AMPS CONTACT RESISTANCE: 1.0 MILLIOHM MAX 5. FOR USE WITH 8 AWG WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .187 4.75 .250 6.35 .144 3.66 .218 5.54 ACROSS FLATS .281 7.14 CATALOG P/N: 01131 .270 6.86 .187 4.75 X .187 DEEP .173 MAX 4.39 MAX RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX ± .01 [0.3] .XXX ± .005 [0.13] .XXXX ± .XXXX ANGLES: ± 2° SCALE: 8:1 NORTHROP GRUMMAN Winchester Electronics CUSTOMER DRAWING DRAWN KJT APPROVED XXX DATE APPROVED 03/08/00 XXX DATE APPROVED XX/XX/XX XXX DATE XX/XX/XX DATE XX/XX/XX 62 Barnes Industrial Road North Wallingford, CT 06492 RIGHT ANGLE SOLDER MOUNT POWERSNAP A SD01131 SHT 1 OF 1 REV F June 2006 - This drawing became the property of Winchester Electronics Corporation, Wallingford, CT.