REV REVISED PER ER11418 2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16. BY APPD DATE DAO E DESCRIPTION DAO 01/07/09 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: .000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290. 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 20 AMPS 5. SUGGESTED FOR USE WITH 14 GA WIRE OR EQUIVALENT. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. +.010 +.25 .00 .218 - .000 5.54 ACROSS FLATS .167 4.24 .144±.001 3.66±.03 .275 6.99 .144 3.66 .275 6.99 .095±.003 2.41±.08 ,085 MAX CATALOG P/N: 01332 RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 2:1 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 8:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN KJT APPROVED JEM DMF029 B DATE APPROVED 01/31/02 JWH DATE APPROVED 02/01/02 JED DATE 02/01/02 DATE 02/01/02 POWERSNAP RIGHT ANGLE SOLDER MOUNT 14 AWG, 20 AMP A SD01332 SHT OF 1 1 REV E