SPECIFICATION • Supplier : Samsung electro-mechanics • Samsung P/N: CL05A475MP5NRNC • Product : Multi-layer Ceramic Capacitor • Description : CAP, 4.7㎌, 10V, ±20%, X5R, 0402 A. Samsung Part Number ① Series CL 05 A 475 M P 5 N R N C ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor ② Size 0402 (inch code) ③ Dielectric X5R ④ Capacitance ⑤ Capacitance L: 1.0 ± 0.15 0.5 ± 0.15 mm W: ⑧ Inner electrode Ni Termination Cu Plating Sn 100% 4.7 ㎌ ±20 % tolerance mm (Pb Free) ⑨ Product 0402 Size dimension spec ⑥ Rated Voltage 10 V ⑩ Special Reserved for future use ⑦ Thickness 0.5 ± 0.15 mm ⑪ Packaging Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Judgement Capacitance Within specified tolerance Tan δ (DF) 0.125 max. Insulation Test condition 1㎑±10% 0.5±0.1Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 50Mohm⋅㎌ Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (×10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55℃ to 85℃, Capacitance change shoud be within ±15%) No peeling shall be occur on the 500g·F, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : within ±12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan δ, IR : initial spec. within ±7.5% Solder pot : 270±5℃, 10±1sec. Judgement Vibration Test Capacitance change : within ±5% Tan δ, IR : initial spec. Moisture Resistance Capacitance change : Tan δ IR : Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours × 3 direction (x, y, z) within ±12.5% With rated voltage 0.25 max 40±2℃, 90~95%RH, 500+12/-0hrs 8.8㏁·㎌ or Over High Temperature Capacitance change : Resistance Tan δ IR : Test condition within ±12.5% With 100% 0.25 max Max. operating temperature 17.7㏁·㎌ or Over Temperature Capacitance change : Cycling Tan δ, IR : initial spec. of the rated voltage within ±10% 1000+48/-0hrs 1 cycle condition Min. operating temperature→ → 25℃ Max. operating temperature → 25℃ 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.