SPECIFICATION • Supplier : Samsung electro-mechanics • Samsung P/N : CL05A474KQ5NNNC • Product : Multi-layer Ceramic Capacitor • Description : CAP, 470㎋, 6.3V, ±10%, X5R, 0402 A. Samsung Part Number ① Series CL 05 A 474 K Q 5 N N N C ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor ② Size 0402 (inch code) ③ Dielectric X5R ④ Capacitance ⑤ Capacitance L: 1.0 ± 0.05 0.5 W: ± 0.05 mm ⑧ Inner electrode Ni Termination Cu Plating Sn 100% 470 ㎋ ±10 % tolerance mm ⑨ Product Normal (Pb Free) ⑥ Rated Voltage 6.3 V ⑩ Special Reserved for future use ⑦ Thickness 0.5 ± 0.05 mm ⑪ Packaging Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Performance 1.0±0.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm⋅㎌ Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (×10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characterisitcs Adhesive Strength (From -55℃ to 85℃, Capacitance change shoud be within ±15%) No peeling shall be occur on the 500g⋅F, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan δ (DF) Insulation Within specified tolerance Test condition 1㎑±10% Capacitance 0.1 max. within ±12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 235±5℃, 5±0.5sec. 2) SnAg3.0Cu0.5 solder 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan δ, IR : initial spec. within ±7.5% Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Capacitance change : within ±5% Tan δ, IR : initial spec. Test condition Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours × 3 direction (x, y, z) Humidity Capacitance change : within ±12.5% 40±2℃, 90~95%RH, 500+12/-0hrs Tan δ : 0.125 max IR : 25㏁·㎌ or Over Moisture Capacitance change : Resistance Tan δ : 0.125 max IR : 40±2℃, 90~95%RH, 500+12/-0hrs 12.5㏁·㎌ or Over High Temperature Capacitance change : Resistance Tan δ : 0.125 max IR : within ±12.5% With rated voltage within ±12.5% With 150% of the rated voltage Max. operating temperature 25㏁·㎌ or Over 1000+48/-0hrs Temperature Capacitance change : Cycling Tan δ, IR : initial spec. within ±7.5% 1 cycle condition Min. operating temperature→ → 25℃ Max. operating temperature → 25℃ 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.