ANADIGICS ADC20013

ADC20013
950 – 2050 MHz DBS Tuner IC
Data Sheet
Rev 8
FEATURES
„
„
„
„
„
„
„
„
„
Monolithic BS tuner IC
On Chip Oscillator
6 dB Noise Figure
11 dB Conversion Gain
Single + 5V Supply
Small Size
Low Cost
High Reliability
Surface Mount Package
FUNCTIONAL BLOCK DIAGRAM
V
DD
IF
RF
LO
OSC
The ANADIGICS DBS (Direct Broadcast Satellite) Tuner IC is intended for use in high volume, low
cost manufacturing of compact DBS tuners for satellite receivers and integrated satellite ready
TV/VTR receivers.
The ADC20013 Tuner IC provides DBS tuner manufacturers the ability to produce, in high volumes,
tuners with low component count, minimal tuning, small size, high reliability and exceptional priceperformance ratios.
The ADC20013 offers a high degree of functionality in a very small and user friendly configuration.
ABSOLUTE MAXIMUM RATINGS
PARAMETER
MIN.
MAX.
UNITS
VDD/VIF
0
+7
V
VLO
-5
+.5
V
VRF
- 10
+.5
V
VOSC
-5
+5
V
Case Temperature
- 55
+ 85
o
Storage Temperature
- 55
+ 100
o
C
C
Input Power RF
+ 10
dBm
Input Power LO
+ 17
dBm
35 Technology Drive, Warren NJ: Phone 908-669-5000, Fax: 908-668-5132
adc20013
02/26/99, 1
ELECTRICAL SPECIFICATIONS
(Packaged unit, TA = 25 oC, VDD = + 5V)
PARAMETER
Frequency
RF
1
LO
IF
MIN.
TYP.
MAX.
UNITS
2050
2530
480
MHz
MHz
MHz
11
dB
950
1430
6
6
Conversion Gain
6
SSB Noise Figure
6.5
11
dB
Third Order IMD4
(-20 dBm Tones, 5 MHz Apart)
- 40
-35
dBc
Second Order IMD
(-20 dBm Input Level)
- 25
- 20
dBc
LO Leakage 1,2
RF Port
IF Port
- 30
0
- 25
3
dBm
dBm
LO Output Level for PLL 3
-8
Tuning Voltage 1(VT)
1
VCO Phase Noise5
10 kHz Offset
100 kHz Offset
-4
dBm
20
Volts
- 70
- 100
- 65
- 95
dBc/Hz
dBc/Hz
60
85
mA
Input Impedance7
Output Impedance 7
Power Supply Current (+ 5V)
NOTES
1. Measured in ANADIGICS test fixture with Toshiba 1SV186 off-chip-varactor.
2. Includes external coupling through test fixture.
3. Oscillator output for external PLL. (Pin 14)
4. Measured at 1450 & 1750 MHz.
5. Measured using PLL (LBW =1KHz, Reference = 1.25 MHz, Step Size = 10 MHz).
6. Measured in ANADIGICS test set-up.
7. See Smith charts.
35 Technology Drive, Warren NJ: Phone 908-669-5000, Fax: 908-668-5132
adc20013
02/26/99, 2
INPUT IMPEDANCE DATA (RF)
1. IMPEDANCE REFERENCE AT PIN 6
2. VCO ON Vt = 3.20 VOLTS
3. Vdd = + 5 VOLTS
4. USE EXTERNAL BIAS TEE FOR IF
1
.5
0.950 GHz
8.40 Ω
- 61.53 j Ω
2
1.250 GHz
8.12 Ω
-34.53 j Ω
3
1.550 GHz
10.13 Ω
- 19.90 j Ω
4
1.750 GHz
12.75 Ω
- 8.70 j Ω
5.
1.900 GHz
15.23 Ω
- 3.03 jΩ
6.
2.050 GHz
16.33 Ω
- 0.27 j Ω
2
.2
5
-Bp
6
5
0
1
.2
.5
1
2
5
4
3
-5
-.2
+Bp
2
1
-2
-.5
-1
MEASURED IN 50 Ω SYSTEM
OUTPUT IMPEDANCE DATA (IF)
1. IMPEDANCE REFERENCE AT PIN 2
2. VCO ON Vt = 3.20 VOLTS
3. Vdd = + 5 VOLTS
4. USE EXTERNAL BIAS TEE FOR IF
1
0.40 GHz
26.8 Ω
- 82.8 j Ω
2
0.48 GHz
22.2 Ω
- 70.0 j Ω
3
0.50 GHz
21.4 Ω
- 67.5 j Ω
4
0.60 GHz
18.1 Ω
- 56.2 j Ω
5.
0.70 GHz
15.9 Ω
- 48.7 jΩ
6.
0.80 GHz
14 Ω
- 41.2 j Ω
1
.5
2
.2
0
5
.2
.5
1
2
- Bp
5
+Bp
-5
-.2
6
5 4 32
1
-.5
-2
-1
MEASURED IN 50 Ω SYSTEM
35 Technology Drive, Warren NJ: Phone 908-669-5000, Fax: 908-668-5132
adc20013
02/26/99, 3
LO IMPEDANCE DATA
1
500.0 MHz
- 60.83 Ω
- 169.80 j Ω
2
1000.0 MHz
-15.15 Ω
-54.41 j Ω
3
1430.0 MHz
- 5.71 Ω
- 24.62 j Ω
4
1700.0 MHz
- 2.80 Ω
- 12.02 j Ω
5.
1922.0 MHz
- 2.83 Ω
- 4.25 jΩ
6.
2768.0 MHz
0.54 Ω
--11.31 j Ω
1. IMPEDANCE REFERENCE AT PIN 11
2. Vdd = + 5 VOLTS
1
.5
2
.2
-.17
6
5
0
.2
.5
1
2
-5.8
5
4
-.2
3
-2
-.5
2
-1
MEASURED IN 50 Ω SYSTEM
MTF vs Tcase
(ADC Series)
1012
1011
1010
MTF (hrs)
109
108
107
106
105
104
103
102
300 280 260 240 220 200 180 160 140
120
100
80
60
Tcase (0 C)
θJC ~ 600 C/W
35 Technology Drive, Warren NJ: Phone 908-669-5000, Fax: 908-668-5132
adc20013
02/26/99, 4