PD104VT2 Version : 1.7 TECHNICAL MODEL SPECIFICATION NO : PD104VT2 Customer’s Confirmation Customer By PVI’s Confirmation Confirmed By Prepared By PRIME VIEW INTERNATIONAL CO.,LTD. 3,LI SHIN RD. 1,SCIENCE-BASED INDUSTRIAL PARK,HSINCHU,TAIWAN,R.O.C. http://www.pvi.com.tw Date:Oct.05,2004 This technical specification is subject to change without notice. Please return 1 copy with your signature on this page for approval. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:1 PD104VT2 TECHNICAL SPECIFICATION CONTENTS NO. ITEM PAGE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Cover Contents Application Features Mechanical Specifications Mechanical Drawing of TFT-LCD module Input / Output Terminals Absolute Maximum Ratings Electrical Characteristics Power On Sequence Optical Characteristics 1 2 3 3 3 4 6 8 8 15 16 19 20 20 21 22 25 - Handling Cautions Reliability Test Indication of Lot Number Label Block Diagram Packing Diagram Revision History The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:2 PD104VT2 1. Application This data sheet applies to a color TFT LCD module, PD104VT2. PD104VT2 module applies to OA product, car TV(must use Analog to Digital drive board), which require high quality flat panel display.If you must use in high reliability environment can’t over reliability test condition. Prime View assume no responsibility for any damage resulting from the use of the device which dose not comply with the instructions and the precautions in these specification sheet. 2. Features . Support the DENB mode . Image Reversion : Up/Down and Left/Right . Amorphous silicon TFT LCD panel with back-light unit . Pixel in stripe configuration . Slim and compact, designed for O/A application . Display Colors：262,144 colors . Optimum Viewing Direction：6 o’clock . +3.3V DC supply voltage for TFT LCD panel driving . Backlight driving DC/AC inverter not included in this module . TTL transmission interface 3.Mechanical Specifications Parameter Screen Size Display Format Display Colors Active Area Pixel Pitch Pixel Configuration Outline Dimension Weight Back-light Surface treatment Display mode Specifications 26.4(diagonal) 10.4 (diagonal) 640×(R, G, B)×480 262,144 211.2(H)×158.4(V) 0.330(H)×0.330(V) Stripe 243.0(w)×185.1 (H)×12.5 (typ.) (D) 516±10 CCFL, 2 tubes Anti-glare and hard-coating Normally white Unit cm inch dot mm mm mm g The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:3 PD104VT2 4.Mechanical Drawing of TFT-LCD Module mm) 1 +10 -0 QUALITY WARRANTY LABEL 1 CHG DIM 60.0±10 TO 60.0 -0 +10 Outline Drawing : Front View (unit The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:4 PD104VT2 mm) 3 'A' 'A' 3 'A' 3 3 A 3 'B' A 3 3 3 'A' 3 'A' 3 'B' QUALITY WARRANTY LABEL 'A' 2 2. ALLOW DEPTH OF SCREW HOLE 'A' IS 1.7mm MAX, M2 SCREW, TORQUE 1.0 Kgf-cm MAX ALLOW DEPTH OF SCREW HOLE 'B' IS 4.0mm MAX, M2 SCREW, TORQUE 1.5 Kgf-cm MAX 'A' 3 'A' 3 2 3 1 3 Add screw hole Dim. & note item 2 3 Outline Drawing : Rear View (unit The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:5 PD104VT2 5.Input / Output Terminals 5-1) TFT-LCD Panel Driving Connector type : Con 2 mode DF9A-31P-1V(HRS) Pin No. Symbol Function 1 GND Ground (0V) 2 CLK Clock Signal for Sampling Image Digital Data 3 Hsync Horizontal Synchronous Signal 4 Vsync Vertical Synchronous Signal 5 GND Ground (0V) 6 R0 Red Image Data Signal (LSB) 7 R1 Red Image Data Signal 8 R2 Red Image Data Signal 9 R3 Red Image Data Signal 10 R4 Red Image Data Signal 11 R5 Red Image Data Signal (MSB) 12 GND Ground (0V) 13 G0 Green Image Data Signal (LSB) 14 G1 Green Image Data Signal 15 G2 Green Image Data Signal 16 G3 Green Image Data Signal 17 G4 Green Image Data Signal 18 G5 Green Image Data Signal (MSB) 19 GND Ground (0V) 20 B0 Blue Image Data Signal (LSB) 21 B1 Blue Image Data Signal 22 B2 Blue Image Data Signal 23 B3 Blue Image Data Signal 24 B4 Blue Image Data Signal 25 B5 Blue Image Data Signal (MSB) 26 GND Ground (0V) Remark 27 DENB Data Enable Signal Note 5-1 Note 5-2 28 29 VCC VCC R/L U/D GND DC +3.3V Power Supply DC +3.3V Power Supply Horizontal Image Shift-direction Select Signal Vertical Image Shift-direction Select Signal Ground (0V) Note 5-4 30 31 Note 5-5 Note 5-5:This pin must connect to ground, if without grounding the panel can’t turn on. Note 5-1 : The relationship between DENB & SYNC. mode 1. DENB mode with the top priority. 2. When working with the SYNC. mode , The Hsync and Vsync determine the timings. 3. This pin must connect to ground, if without DENB. Mode DENB VGA Hsync Polarization Don’t care Negative Vsync Polarization Don’t care Negative SYNC. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:6 PD104VT2 Note 5-2 : DENB input signal. If customer wanted to off the DENB mode , you must keep the DENB (pin 27) always High or Low. 800 tc 640 tc DENB Note 5-4 : The definitions of U/D & R/L U/D & R/L (PIN 30)= High U/D & R/L (PIN 30)= Low 5-2) Backlight driving Connector type:BHR-03VS-1 (JST) , PIN No 3pin, pitch=4mm Pin No Symbol Description 1 VL1 Input terminal (Hi voltage side) 2 NC No Connection 3 VL2 Input terminal (Low voltage side) Remark Wire color : Pink Wire Color : White Note 5-3 Note 5-3 : Low voltage side of backlight inverter connects with ground of inverter circuits. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:7 PD104VT2 6. Absolute Maximum Ratings : The followings are maximum values , which if exceeded, may cause faulty operation or damage to the unit. Parameters Supply Voltage Input Signal Voltage Backlight Driving Voltage Backlight Driving Frequency Storage Temperature Operating Temperature Symbol Vcc VIN VL FL TST TOP MIN. -0.3 -0.3 0 -10 -10 MAX. +4.0 Vcc+0.3 2000 100 +70 +60 GND=0V, Ta=25℃ Unit Remark V V Note 6-1 V KHz ℃ Note 6-2 ℃ Note 6-1 : Input signals include CLK , Hsync , Vsync , DENB , R[0:5] , G[0:5] and B[0:5]. Note 6-2 : Optical characteristics shown in Table 9-1 are measured under Ta=+25℃. 7.Electrical Characteristics 7-1) Recommended Operating Conditions: Item Symbol Min. Supply Voltage Vcc 3.0 Current Dissipation Icc H level VIN 0.7 VCC Digital input voltage -0.1 L level VIL Lamp Current IFL 3.0 Lamp Voltage Lamp Initial Voltage Lamp Driving Frequency Lamp Life Time VL VSFL FL Typ. 3.3 300 6.0 540 540 - - - - 50 30000 60 - GND = 0V，Ta = 25℃ Max. Unit Remark 3.6 V 390 mA Note 7-1 VCC V 0.1 VCC V Per CCFL 8.0 mA Note 7-2 Note 7-4 650 Vrms Note 7-2 at Ta=25°C 1060 Vrms Note 7-3 at Ta=0°C 1300 Note 7-3 70 KHz Hrs Note 7-5 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:8 PD104VT2 Note 7-1 : To test the current dissipation of Vcc, using the “color bars” testing pattern shown as below 1 2 3 4 5 6 7 1. 2. 3. 4. 5. 6. 7. 8. 8 White Yellow Cyan Green Magenta Red Blue Black Idd current dissipation testing pattern Note 7-2 : The back-light driving waveform should be as closed to sine-wave as possible. In order to satisfy the quality of B/L , no matter use what kind of inverter , the output lamp current must between Min. and Max. to avoid the abnormal display image caused by B/L. Note 7-3 : Not including the efficiency of backlight DC/AC inverter The kick-off time must larger than 1 second Note 7-4 : Lamp current is measured with current meter for high frequency as shown below Lamp current dissipation testing configuration 1 2 3 NC TFT-LCD MODULE Inverter 1 2 3 NC Ground Note1:Pin 1 is high voltage,Pin 2 NC, Pin 3 ground. Note2:One Lamp Current is 6mA.Two Lamp 12mA. Note 7-5: The life time is determined as the time at which brightness of lamp is 50% compare to that of initial value at the typical lamp current. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:9 PD104VT2 7-2) Input / Output signal timing chart Parameters CLK Frequency Period Hsync Display period Pulse width Back-porch Front-porch Hpw+Hbp Hsync-CLK Vsync-Hsync Period Vsync Data DENB Display period Pulse width Back-porch Front-porch Vpw+Vbp CLK-DATA DATA-CLK Horizontal scanning period Horizontal display period Vertical display period Frame cycling period Symbol Fc=1/Tc tc Min. Hp Hdp Hpw Hbp Hfp Hhc Hvh Vp Vdp Vpw Vbp Vfp 12 12 136 10 0 515 Dcd Ddc 2 2 1 31 10 10 T1 780 Typ. 25.175 40 31.778 800 640 96 48 16 144 0 16.8 525 480 2 33 10 35 800 Max. 139 139 151 Tc-10 200 800 35 35 38 900 Unit MHz ns us tc tc tc tc tc tc ns tc ms Hp Hp Hp Hp Hp Hp ns ns 640 tc T3 480 T1 515 525 800 Note 7-6 tc T2 T4 Note T1 Note 7-6 : Tc is the period of sampling clock. In case of low-frequency , the image-flicker may occur. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:10 PD104VT2 7-3) Display Time Range (1) Vertical Timing : Hsync Hvh Vsync (2) Horizontal Timing : Hsync Hhc tc CLK DATA R0~R5 , G0~G5 , B0~B5 Dcd Ddc (3) DENB Timing : DENB T1 T2 T3 1 480 1 2 3 DENB T4 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:11 PD104VT2 (4) Detail of Horizontal Timing : Hp Hpw Hsync Hbp Hdp Hfp Display period (a) VGA-480 Mode (Hsync = Negative Polarization) Item Hpw Hbp Hdp Hfp Hp Description Horizontal Width Horizontal B-Porch Horizontal Display Horizontal F-Porch Horizontal Total Clock Cycles 96 48 640 16 800 Time 3.813 μs 1.907 μs 25.422 μs 0.636 μs 31.778 μs (5) Detail of Vertical Timing : Vp Vpw Vsync Vbp Vdp Vfp Display period (a) VGA-480 Mode (Vsync = Negative Polarization) Item Vpw Vbp Vdp Vfp Vp Description Vertical Width Vertical B-Porch Vertical Display Vertical F-Porch Vertical Total Horizontal Lines 2 33 480 10 525 Time 63.5 μs 1.049 ms 15.253 ms 317.8 μs 16.683 ms The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:12 PD104VT2 7-5) Display Color and Gray Scale Reference Color Input Color Data Green Red Blue R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 Basic Colors Red Green Blue Black Red (63) Green (63) Blue (63) Cyan Magenta Yellow White Red (00) Red (01) Red (02) Darker ↓ Brighter Red (61) Red (62) Red (63) Green (00) Green (01) Green (02) Darker ↓ Brighter Green (61) Green (62) Green (63) Blue (00) Blue (01) Blue (02) Darker ↓ Brighter Blue (61) Blue (62) Blue (63) 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 0 0 1 0 0 0 1 1 1 0 0 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 1 0 1 0 1 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 0 0 0 1 1 1 0 1 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 1 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:13 PD104VT2 8. Power On Sequence 3.0 V 0 s< t <35 ms 0 s< t <35 ms 3.0 V VCC Signal 35ms 0<17ms Backlight 1. The supply voltage for input signals should be same as VCC. 2. When the power is off , please keep whole signals (Hsync, Vsync, CLK, Data) low level or high impedance The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:14 PD104VT2 9. Optical Characteristics 9-1) Specification: Parameter Horizontal Viewing Angle Vertical Contrast Ratio Rise Response time Fall Brightness Luminance Uniformity Lamp Life Time White Chromaticity Cross Talk Symbol Condition θ θ(to 12 o’clock) CR＞10 θ(to 6 o’clock) CR Tr θ=0° Tf θ=0°/φ=0 U x y θ=0° MIN. ±40 TYP. ±45 MAX. Unit deg 10 15 - deg 25 40 - deg 200 290 70 30000 0.279 0.307 - 400 15 ms 25 ms 330 cd/㎡ 80 % hr 0.309 0.339 0.337 0.367 3.5 % Ta=25℃ Remarks Note 9-3 Note 9-1 Note 9-4 Note 9-2 Note 9-6 Note 9-5 All the optical measurement shall be executed 30 minutes after backlight being turn-on. The optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 Lux). The measuring configuration shows as following figure. Photometer (TOPCON BM-5A or BM-7 fast) 500 mm +/- 50 mm Field = 2° TFT-LCD module DC/AC Inverter Optical characteristics measuring configuration The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:15 PD104VT2 Note 9-1：The definitions of viewing angles are as follow Lamp connector θ 12 o’clock 3 o’clock 9 o’clock 6 o’clock φ Note 9-2 : The definition of contrast ratio CR = Luminance at gray level 63 Luminance at gray level 0 Note 9-3：Topcon BM-5A luminance meter 2°field of view is used in the testing (after 30 minutes’ operation). The typical luminance value is measured at lamp current 12.0 mA. Note 9-4: Definition of Response Time Tr and Tf: White Black White 100% 90% Brightness 10% 0% Tr Tf The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:16 PD104VT2 Note 9-5 : The uniformity of LCD is defined as The Minimum Brightness of the 9 testing Points U= The Maximum Brightness of the 9 testing Points Luminance meter : BM-5A or BM-7 fast (TOPCON) Measurement distance : 500 mm +/- 50 mm Ambient illumination : < 1 Lux Measuring direction : Perpendicular to the surface of module The test pattern is white (Gray Level 63). 1/6 2/6 2/6 1/6 1/6 2/6 2/6 YA-YB YA YA : Brightness of Pattern A YB : Brightness of Pattern B Pattern A Note 9-6 : Cross Talk (CTK) = 1/6 ×100% Pattern B (Gray Level 31) (Gray Level 31, central black box exclusive) YA YB 1/3 1/3 1/3 1/3 1/3 1/3 Black : Testing Point (A and B are at the same point.) (Gray Level 0) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:17 PD104VT2 10. Handling Cautions 10-1) Mounting of module a) Please power off the module when you connect the input/output connector. b) Please connect the ground pattern of the inverter circuit surely. If the connection is not perfect, some following problems may happen possibly. 1.The noise from the backlight unit will increase. 2.The output from inverter circuit will be unstable. 3. In some cases a part of module will heat. c) Polarizer which is made of soft material and susceptible to flaw must be handled carefully. d) Protective film (Laminator) is applied on surface to protect it against scratches and dirts. It is recommended to peel off the laminator before use and taking care of static electricity. 10-2) Precautions in mounting a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled, wipe it with soft dry cloth. b) Wipe off water drops or finger grease immediately. Long contact with water may cause discoloration or spots. c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard surface. Please handle with care. d) Since CMOS LSI is used in the module. So take care of static electricity and earth yourself when handling. 10-3) Adjusting module a) Adjusting volumes on the rear face of the module have been set optimally before shipment. b) Therefore, do not change any adjusted values. If adjusted values are changed, the specifications described may not be satisfied. 10-4) Others a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) Store the module at a room temperature place. c) The voltage of beginning electric discharge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel. Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet. Wash it out immediately with soap. e) Observe all other precautionary requirements in handling general electronic components. f) Please adjust the voltage of common electrode as material of attachment by 1 module. 10-5) Polorizer mark The polorizer mark is to describe the direction of wide view angle film how to mach up with the rubbing direction. The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:18 PD104VT2 11. Reliability Test No Test Item Test 1 High Temperature Storage Test Ta = +70℃, 240 hrs 2 Low Temperature Operation Test Ta = -10℃, 240 hrs 3 4 5 6 7 Condition Remark High Temperature & High Humidity Ta = +60℃, 90%RH, 240 hrs Operation Test (No Condensation) Thermal Cycling Test 0℃ Æ (non-operating) Vibration Test 1Hr 1Hr Frequency：10 ~ 57 HZ , Amplitude：0.5 mm 58~500Hz, 1G Sweep time: 11 min (non-operating) Test Period: 3 hrs (1 hr for each direction of X, Shock Test Y, Z) 80G, 6ms, X,Y, Z (non-operating) 1 times for each direction Electrostatic Discharge Test (non-operating) +60℃, 50 Cycles 150pF, 330Ω Air: ±15KV; Contact: ±8KV 10 times/point, 9 points/panel face Ta: ambient temperature [Judgement Criteria] Under the display quality test conditions with normal operation state , there should be no change which may affect practical display function. 12. Indication of Lot Number Label 1. Indicated contents of the label Lot number OOO-OOOOOO PD104VT2XX Module number Contents of lot number : 1st—Process area : class 1000, 10K, 100K ⇒ D 2nd~3rd—Module screen size(in inch) : 1.8”⇒18, 10.4”⇒A4…… 5th—Production year : 1999⇒9, 2000⇒A, 2001⇒1…….. 6th—Production month : 1, 2, 3,….9, A, B, C 7th~10th—Serial numbers : 0001~9999 The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:19 PD104VT2 13. Block Diagram VL B a c k lig h t GND IC V 1 1 IC H1 V SYNC 2 3 IC V 4 IC V 5 1920 2 3 Control Board R [5 :0 ] IC V 3 1 H SYNC CLK IC V 2 T F T -L C D D is p la y A re a G [5 :0 ] IC H2 B [5 :0 ] 478 479 480 VL GND B a c k lig h t The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:20 PD104VT2 14. Packing Diagram The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:21 PD104VT2 Revision History Rev. 1.0 1.1 Issued Date Sep 12,2002 Mar. 18,2003 Revised Contents 1.2 Mar. 31,2003 Add Page 17 10.Handling Cautions Add Page 18 12. Indication of Lot Number Label 1.3 Aug. 26 ,2003 Modify Page 9 7-4 Display Time Range(remove positive input signal ) Modify Page 18 11. Reliability Test(remove low temperature storage test , low temperature operation test from 0℃ to -10℃) Modify Page 18 12. Indication of Lot Number Label 1.4 Nov. 25 ,2003 1.5 1.6 Mar. 18 ,2004 Sep. 14, 2004 1.7 Sep. 30, 2004 Modify Page 4, 5 Mechanical Drawing Add Page 6 Support the DENB mode & Image Reversion : Up/Down and Left/Right Modify Page16 Contrast Ratio (CR from Typ.180,Min.100 to Typ.400,Min.200) Modify Page 20 Indication of Lot Number Label Page 8 Electrical Characteristics a.Input/Output signal timing chart b.Display Time Range Modify Page 7 Note 5-4:The definitions of U/D & R/L Modify Page 5 Mechanical Drawing Modify Page 21 Packing Diagram Page 9 Note 7-3 Add Lamp kick –off time New Modify Page 5 Mechanical Drawing(change PCBA outline dimension) Modify Page 6 TFT-LCD Panel Driving (pin 31 must connect to ground ) Modify Page 7-3 Input / Output signal timing chart (Back Porch form 49 to 48) Modify Page 17 Reliability test (High Temperature & High Humidity Operation Test from 60℃,95%RH to 60℃,90%RH) The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd. Page:22