AZDISPLAYS PM070WT4

P-511-387(V:1)
PM070WT4
Version :1.0
TECHNICAL SPECIFICATION
MODEL NO. : PM070WT4
The content of this information is subject to be changed without notice.
Please contact PVI or its agent for further information.
Customer’s Confirmation
Customer
Date
By
PVI’s Confirmation
FOR MORE INFORMATION:
AZ DISPLAYS, INC.
75 COLUMBIA, ALISO VIEJO, CA, 92656
Http://www.AZDISPLAYS.com
Confirmed By
Prepared By
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:1
P-511-387(V:1)
PM070WT4
TECHNICAL SPECIFICATION
CONTENTS
NO.
ITEM
PAGE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
-
Cover
Contents
Application
Features
Mechanical Specifications
Mechanical Drawing of TFT-LCD module
Input / Output Terminals
Touch Panel Characteristics
Absolute Maximum Ratings
Electrical Characteristics
Pixel Arrangement
Display Color and Gray Scale Reference
Block Diagram
Interface Timing
Power On Sequence
Optical Characteristics
Handling Cautions
Reliability Test
Packing Diagram
Revision History
1
2
3
3
3
4
6
8
9
9
11
12
13
14
17
17
21
22
23
24
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:2
P-511-387(V:1)
PM070WT4
1.Application
This data sheet applies to a color TFT LCD module, PM070WT4.
The application of panel are OA product, portable DVD, car TV(must use Analog to Digital driving
board), which requires high quality flat panel display.
Prime View assume no responsibility for any damage resulting from the use of the device
which dose not comply with the instructions and the precautions in these specification sheet.
2. Features
. Wide VGA (800*480 pixels) resolution
. Amorphous silicon TFT LCD panel with back-light unit
. Pixel in stripe configuration
. Thin and light weight
. Display Colors:262,144 colors
. +3.3V DC supply voltage for TFT LCD panel driving
. Wide viewing angle
. TTL interface
. Module with resistive type touch panel .
. Backlight driving DC/AC inverter not included in this module
3.Mechanical Specifications
Parameter
Screen Size
Display Format
Display Colors
Active Area
Pixel Pitch
Pixel Configuration
Outline Dimension
Weight
Back-light
Surface treatment
Display mode
Surface treatment of Touch Panel
Specifications
7.0(diagonal)
800×(R, G, B)×480
262,144
152.4(H)×91.44(V)
0.1905(H)×0.1905(V)
Stripe
166.3(W)×105.3 (H)×10.7 (typ.) (D)
318±15
CCFL, 1 tube
Anti-glare and Wide View Film
Normally white
3H
Gray scale inversion direction
6 o’clock
[ ref to Page 17 viewing angle ]
Unit
inch
dot
mm
mm
mm
g
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:3
P-511-387(V:1)
PM070WT4
:
:
:
:±
裸銅鍍金
Housing
裸銅鍍金
補強片
Housing(LOCK)
4.Mechanical Drawing of TFT-LCD Module
Outline Drawing : Front View (unit mm)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:4
P-511-387(V:1)
PM070WT4
Outline Drawing : Rear View (unit mm)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:5
P-511-387(V:1)
PM070WT4
5.Input Terminals
5-1) TFT-LCD Panel Driving
Connector type: ELCO 6210-30P
Pin No. Symbol
Function
1
CLK
Clock Signal for Sampling Image Digital Data
2
Hsync
Horizontal Synchronous Signal
3
Vsync
Vertical Synchronous Signal
4
GND
Ground (0V)
5
R0
Red Image Data Signal (LSB)
6
R1
Red Image Data Signal
7
R2
Red Image Data Signal
8
R3
Red Image Data Signal
9
R4
Red Image Data Signal
10
R5
Red Image Data Signal (MSB)
11
GND
Ground (0V)
12
G0
Green Image Data Signal (LSB)
13
G1
Green Image Data Signal
14
G2
Green Image Data Signal
15
G3
Green Image Data Signal
16
G4
Green Image Data Signal
17
G5
Green Image Data Signal (MSB)
18
GND
Ground (0V)
19
B0
Blue Image Data Signal (LSB)
20
B1
Blue Image Data Signal
21
B2
Blue Image Data Signal
22
B3
Blue Image Data Signal
23
B4
Blue Image Data Signal
24
B5
Blue Image Data Signal (MSB)
25
GND
Ground (0V)
26
DENB
Compound Synchronization signal
27
VCC
DC +3.3V Power Supply
28
VCC
DC +3.3V Power Supply
Left / Right control for source driver
29
R/L
Up / Down control for gate driver
30
U/D
Remark
Note5-1
Note5-2
Note5-2
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:6
P-511-387(V:1)
PM070WT4
Note5-1 DENB input signal.
If customer wanted to off the DENB mode , you must keep the DENB always High or
Low.
1 0 5 6 tc
8 0 0 tc
DENB
(tc: the period of sampling clock)
Note 5-2 The definitions of U/D & R/L
U/D(PIN 30)=Low R/L(PIN 29)=High
U/D(PIN 30)=High R/L(PIN 29)=Low
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:7
P-511-387(V:1)
PM070WT4
6.Touch Panel Characteristics
6.1) Pin assignment:
Pin
No.
1
Symbol
Function
Remark
YU
Upper electrode Y(Upper side)
2
XR
Lower electrode X(Right side)
3
YD
Upper electrode Y(Down side)
4
XL
Lower electrode X(Left side)
6.2) Electrical Performance:
Parameters
Terminal Resistance
Input Voltage
Linearity(X ,Y direction)
Insulation Impedance
Response Time
Operation Force
Symbol
X
Y
VT
MIN.
580
120
20
-
Typ.
840
180
5.0
-
MAX.
1200
260
7.0
±1.5
15
50
Unit
Ω
Ω
V
%
MΩ
ms
g
Remark
DC 25V
Note 6-1
Note 6-1 Input through 0.8R stylus or finger.
6.3) Durability Performance
1. Hitting Durability:
At least 1,000,000 times with R8.0mm silicon rubber, 250g , 3times/sec .
2. Sliding Durability:
At least 100,000 times with R0.8mm polyacetal stylus , 250g , 60mm/sec.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:8
P-511-387(V:1)
PM070WT4
7.Absolute Maximum Ratings:
Parameters
Supply Voltage
Input Signals Voltage
Backlight Driving Frequency
Symbol
VCC
VIN
FL
MIN.
-0.3
-0.3
0
MAX.
+4.0
VCC +0.3
100
GND=0V, Ta=25℃
Unit
Remark
V
V
KHz
8.Electrical Characteristics
8-1) Recommended Operating Conditions:
GND = 0V,Ta = 25℃
Item
Symbol Min.
Typ.
Max.
Unit
Remark
VCC
3.0
3.3
3.6
V
Supply Voltage
Current Dissipation
ICC
178.3 194.5
mA
Note7-1
0.7 VCC
High Level
VIN
mV
VCC
Digital input voltage
0.1VCC
Low Level
VIL
-0.1
Vcom Voltage
Vcom
V
3.1
-
Note 8-1 : To test the current dissipation of VCC using the “color bars” testing pattern shown as
below
1
2
3
4
5
6
7
8
1.
2.
3.
4.
5.
6.
7.
8.
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
ICC current dissipation testing pattern
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:9
P-511-387(V:1)
PM070WT4
8-2) Recommended Driving Condition for Back Light
Parameter
Lamp Voltage
Lamp Current
Lamp Frequency
Starting Voltage (25℃)
(Reference Value)
Starting Voltage (0℃)
(Reference Value)
Symbol
VL
IL
PL
Min.
522
4
45
Typ.
580
6
Vs
Vs
Ta=25℃
Max.
638
60
7
80
Unit
V
mA
KHz
Remark
IL=6mA
Note 8-2
Note 8-3
-
-
1090
Vrms
Note 8-4
-
-
1420
Vrms
Note 8-4
Note 8-2 In order to satisfy the quality of B/L, no matter use what kind of inverter, the
output lamp current must between Min. and Max. to avoid the abnormal
display image caused by B/L.
Note 8-3: The waveform of lamp driving voltage should be as closed to a perfect sine
wave as possible.
Note 8-4 The” Max of starting voltage ” means the minimum voltage of inverter to turn
on the CCFL. and it should be applied to the lamp for more than 1 second to
start up. Otherwise the lamp may not be turned on.
8-3) Backlight driving & Power Consumption
Pin No
1
2
Symbol
VL1
VL2
Description
Input terminal (Hi voltage side)
Input terminal (Low voltage side)
Remark
Note 8-6
Note 8-6 : Low voltage side of backlight inverter connects with ground of inverter
circuits.
Parameter
LCD Power consumption (W/O BL)
Backlight Lamp Power Consumption
Total Power Consumption
Symbol
-
Typ.
0.59
3.48
4.07
Max.
0.71
4.47
5.18
Unit
W
W
W
Remark
Note 8-7
Note 8-7: Backlight lamp power consumption is calculated by IL x VL
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:10
P-511-387(V:1)
PM070WT4
9. Pixel Arrangement
The LCD module pixel arrangement is the stripe.
R G B R G B R G B 1 st Line
RGB
R G B R G B 2 nd Line
RGB
R G B 3 rd Line
RGB
1 st Pixel
800 th Pixel
1 Pixel = R G B
RGB
478 th Line
RGBRGB
RGB
479 th Line
RGBRGBRGB
480 th Line
RGB
RGB
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:11
P-511-387(V:1)
PM070WT4
10. Display Color and Gray Scale Reference
Color
Input Color Data
Green
Red
Blue
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Basic
Colors
Red
Green
Blue
Black
Red (63)
Green (63)
Blue (63)
Cyan
Magenta
Yellow
White
Red (00)
Red (01)
Red (02)
Darker
↓
Brighter
Red (61)
Red (62)
Red (63)
Green (00)
Green (01)
Green (02)
Darker
↓
Brighter
Green (61)
Green (62)
Green (63)
Blue (00)
Blue (01)
Blue (02)
Darker
↓
Brighter
Blue (61)
Blue (62)
Blue (63)
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
0
0
1
0
0
0
1
1
1
0
0
1
0
1
0
0
0
1
1
1
0
1
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
1
0
1
0
1
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
0
0
0
1
1
1
0
1
0
0
0
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
1
1
1
0
0
0
0
1
1
0
0
0
1
0
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
0
0
0
0
1
0
↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:12
P-511-387(V:1)
PM070WT4
11. Block Diagram
11-1) TFT-module Block Diagram
SYSTEM
+3.3V
User
signal
input
Timing Controller
(PVI-2003A)
Video
Control
VDD1
DC-DC
Converter
Gamma
Generator
Vcom
Generator
VGG / VEE
VDD2
Gamma
FPC
Source
Driver
IC
7.0"WVGA
TFT-LCDPanel
Vcom
Gate Driver IC
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:13
P-511-387(V:1)
PM070WT4
12. Interface Timing
12.1) Timing Parameters
Power supply
CLK
Frequency
HSYNC Period
Display period
Pulse width
Back-porch
Front-porch
Hpw+Hbp
Hsync-CLK
Vsync-Hsync
VSYNC Period
DENB
R,G,B
Symbol
VCC
1/tc
tc
Hp
Min.
3.0
10
0
-
Typ.
3.3
32
31.25
33
1056
800
128
86
42
214
0
17.325
525
480
2
33
10
35
Max.
3.6
Tc-10
200
-
Unit
V
MHz
ns
us
tc
tc
tc
tc
tc
tc
ns
tc
ms
Hp
Hp
Hp
Hp
Hp
Hp
T1
860
1056
1064
tc
T2
-
800
-
tc
T3
-
480
-
T1
T4
520
525
800
T1
Hdp
Hpw
Hbp
Hfp
Hhc
Hvh
Vp
Display period
Pulse width
Back-porch
Front-porch
Vpw+Vbp
Horizontal
scanning period
Horizontal
display period
Vertical display
period
Frame cycling
period
CLK-DATA
Vdp
Vpw
Vbp
Vfp
Dcd
10
-
-
ns
DATA-CLK
Ddc
8
-
-
ns
Remark
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:14
P-511-387(V:1)
PM070WT4
12.2) The Timing Diagram
A. The timing chart for DENB mode
a-1 CLK data ,relationship
tc
R05-R00
G05-G00
B05-B00
DENB
a-2 DENB Timing
B. The timing chart for sync mode
b-1 CLK Hsync relation ship
CLK
Hhc
HSYNC
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:15
P-511-387(V:1)
PM070WT4
b-2 Hsync timing
HSYNC
Hp
Hpw
Hdp
Hbp
Hfp
R,G,B Vaild data
b-3 Hsync ,Vsync relation ship
b-4 Vsync Timing
Valid line
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:16
P-511-387(V:1)
PM070WT4
13. Power On Sequence
VCC
Logic Signal
Backlight
ON
OFF
>10ms
OFF
>10ms
1. 0<t1≦20ms
2. 0<t2≦50ms
3. 0<t3≦1s
14. Optical Characteristics
14-1) Specification:
Parameter
Horizontal
Symbol
θ21.22
θ12
Viewing
(to
12
’clock)
Angle
Vertical
θ11
(to 6 o’clock)
Contrast Ratio
CR
Rise
Tr
Response time
Fall
Tf
Brightness
L
Luminance Uniformity
U
Lamp Life Time
x
White Chromaticity
y
Cross Talk
-
Condition
CR>10
θ=0°/φ=0
MIN.
±55
TYP.
±60
MAX.
-
Unit
deg
35
40
-
deg
50
55
-
deg
400
15
25
330
75
0.30
0.32
-
30
50
0.33
0.35
3.5
ms
ms
cd/㎡
%
hr
%
250
θ=0°/φ=0
θ=0°/φ=0 280
70
25000
0.27
θ=0°/φ=0
0.29
θ=0°
Ta=25℃
Remarks
Note 14-1
Note 14-2
Note 14-3
Note 14-4
At 6mA
Note 14-5
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:17
P-511-387(V:1)
PM070WT4
All the optical measurement shall be executed 30 minutes after backlight being turn-on.
The optical characteristics shall be measured in dark room (ambient illumination on panel
surface less than 1 Lux). The measuring configuration shows as following figure.
Photometer (TOPCON
BM-5A or BM-7 fast)
500 mm +/- 50 mm
Field = 1°
TFT-LCD module
DC/AC Inverter
Optical characteristics measuring configuration
Topcon BM-5A or BM-7 fast luminance meter 1°field of view is used in the testing (after
30 minutes’ operation). The typical luminance value is measured at lamp current 6.0
mA.
Note 14-1: The definitions of viewing angles are as follow.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:18
P-511-387(V:1)
PM070WT4
Note 14-2: The definition of contrast ratio CR =
Luminance at gray level 63
Luminance at gray level 0
Note 14-3: Definition of Response Time Tr and Tf:
White
Black
White
100%
90%
Brightness
10%
0%
Tr
Tf
Note 14-4: The uniformity of LCD is defined as
The Minimum Brightness of the 9 testing Points
U=
The Maximum Brightness of the 9 testing Points
Luminance meter : BM-5A or BM-7 fast(TOPCON)
Measurement distance : 500 mm +/- 50 mm
Ambient illumination : < 1 Lux
Measuring direction : Perpendicular to the surface of module
The test pattern is white (Gray Level 63).
1/6
2/6
2/6
1/6
1/6
2/6
2/6
1/6
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:19
P-511-387(V:1)
PM070WT4
Note 14-5: Cross Talk (CTK) =
YA-YB
×100%
YA
YA: Brightness of Pattern A
YB: Brightness of Pattern B
Luminance meter : BM 5A or BM-7 fast (TOPCON)
Measurement distance : 500 mm +/- 50 mm
Ambient illumination : < 1 Lux
Measuring direction : Perpendicular to the surface of module
Pattern A
Pattern B
(Gray Level 31)
(Gray Level 31, central
black box exclusive)
YA
YB
1/3
1/3
1/3
1/3
1/3
1/3
Black
: Measuring Point (A and B are at the same point.)
(Gray Level 0)
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:20
P-511-387(V:1)
PM070WT4
15. Handling Cautions
15-1) Mounting of module
a) Please power off the module when you connect the input/output connector.
b) Please connect the ground pattern of the inverter circuit surely. If the connection
is not perfect, some following problems may happen possibly.
1.The noise from the backlight unit will increase.
2.The output from inverter circuit will be unstable.
3.In some cases a part of module will heat.
c) Polarizer which is made of soft material and susceptible to flaw must be
handled carefully.
d) Protective film (Laminator) is applied on surface to protect it against scratches
and dirts. It is recommended to peel off the laminator before use and taking
care of static electricity.
15-2) Precautions in mounting
a) When metal part of the TFT-LCD module (shielding lid and rear case) is soiled,
wipe it with soft dry cloth.
b) Wipe off water drops or finger grease immediately. Long contact with water may
cause discoloration or spots.
c) TFT-LCD module uses glass which breaks or cracks easily if dropped or bumped on hard
surface. Please handle with care.
d) Since CMOS LSI is used in the module. So take care of static electricity and
earth yourself when handling.
15-3) Adjusting module
a) Adjusting volumes on the rear face of the module have been set optimally before
shipment.
b) Therefore, do not change any adjusted values. If adjusted values are changed, the
specifications described may not be satisfied.
15-4) Others
a) Do not expose the module to direct sunlight or intensive ultraviolet rays for many
hours.
b) Store the module at a room temperature place.
c) The voltage of beginning electric discharge may over the normal voltage because of
leakage current from approach conductor by to draw lump read lead line around.
d) If LCD panel breaks, it is possibly that the liquid crystal escapes from the panel.
Avoid putting it into eyes or mouth. When liquid crystal sticks on hands, clothes or feet.
Wash it out immediately with soap.
e) Observe all other precautionary requirements in handling general electronic components.
f) Please adjust the voltage of common electrode as material of attachment by 1 module.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:21
P-511-387(V:1)
PM070WT4
16. Reliability Test
No
1
2
3
4
5
6
Test Item
High Temperature Storage Test
Low Temperature Storage Test
High Temperature Operation Test
Low Temperature Operation Test
High Temperature & High Humidity
Operation Test
Thermal Cycling Test
(non-operating)
7
Vibration Test
(non-operating)
8
Shock Test
(non-operating)
9
Electrostatic Discharge Test
(non-operating)
10
11
Hitting Durability Test
( Touch panel)
Sliding Durability Test
( Touch panel)
Test Condition
Remark
Ta = +80℃, 240 hrs
Ta = -30℃, 240 hrs
Ta = +70℃, 240 hrs
Ta = -20℃, 240 hrs
Ta = +60℃, 90%RH, 240 hrs
(No Condensation)
-30℃+80℃, 100 Cycles
30min 30min
Frequency:10 ~ 55 HZ ,
Amplitude:1 mm
Sweep time: 11 min
Test Period: 6 Cycles for each direction of X, Y, Z
100G, 6ms
Direction: ±X, ±Y, ±Z Cycle: 3 times
Contact mode: ±8KV,10times/point
, 9 points/panel face
Air mode: 150pF, 330ΩAir : ±15KV
1,000,000 times, with R 8.0 mm silicon rubber,
250g, 3times/sec
100,000 times, with R 0.8 mm polyacetal stylus,
250g, 60mm/sec
Ta: ambient temperature
Note: The protective film must be removed before temperature test.
[Criteria]
In the standard conditions, there is not display function NG issue occurred. (including : line
defect ,no image), All the cosmetic specification is judged before the reliability stress.
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:22
P-511-387(V:1)
PM070WT4
16. Packing Diagram
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:23
P-511-387(V:1)
PM070WT4
Revision History
Rev.
0.1
1.0
Eng.
蔡弘毅
蔡弘毅
Issued Date Revised
Contents
Oct.24.2006
New
Jan.03.2006
Release version
The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be
distributed, reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co.,
Ltd.
Page:24