SV05..F SV05..F Fast Recovery Diode Advance Information Replaces March 1998 version, DS4144-3.4 DS4144-4.0 January 2000 KEY PARAMETERS VRRM 2500V IF(AV) 145A IFSM 2500A Qr 150µC trr 2.2µs APPLICATIONS ■ Induction Heating ■ A.C. Motor Drives ■ Snubber Diode ■ Welding ■ High Frequency Rectification ■ UPS FEATURES ■ Double Side Cooling ■ High Surge Capability ■ Low Recovery Charge VOLTAGE RATINGS Type Number Repetitive Peak Reverse Voltage VRRM V SV05 25F M or K SV05 24F M or K SV05 22F M or K SV05 20F M or K 2500 2400 2200 2000 Conditions VRSM = VRRM + 100V For 1/2" 20 UNF thread, add suffix K, e.g. SV05 25FK. For M12 thread, add suffix M, e.g. SV05 25FM. For stud anode add 'R' to type number, e.g. SV05 25FMR. For outline DO8C add suffix 'C' to typ number, e.g. SV05 25FKC. Outline type codes: DO8 and DO8C. See Package Details for further information. CURRENT RATINGS Symbol Parameter Conditions Max. Units IF(AV) Mean forward current Half wave resistive load, Tcase = 65oC 145 A IF(RMS) RMS value Tcase = 65oC 225 A Continuous (direct) forward current Tcase = 65oC 195 A IF 1/8 SV05..F SURGE RATINGS Symbol Conditions Parameter IFSM Surge (non-repetitive) forward current I2t I2t for fusing IFSM Surge (non-repetitive) forward current I2t I2t for fusing Max. Units 2.5 kA 31 x 103 A2s 2.0 kA 20 x 103 A2s 10ms half sine; with 0% VRRM, Tj = 150oC 10ms half sine; with 50% VRRM, Tj = 150oC THERMAL AND MECHANICAL DATA Conditions Parameter Symbol Min. Max. Units Rth(j-c) Thermal resistance - junction to case dc - 0.23 o Rth(c-h) Thermal resistance - case to heatsink Mounting torque 15Nm with mounting compound - 0.02 o Tvj Virtual junction temperature On-state (conducting) - 150 o Tstg Storage temperature range -55 150 o Mounting torque 13.5 16.5 Nm Typ. Max. Units - C/W C/W C C CHARACTERISTICS Symbol VFM Forward voltage At 600A peak, Tcase = 25oC - 2.8 V IRRM Peak reverse current At VRRM, Tcase = 150oC - 50 mA 2.2 - µs trr Reverse recovery time Recovered charge (50% chord) IF = 600A, diRR/dt = 80A/µs - 150 µC IRM Reverse recovery current Tcase = 150oC, VR = 100V - 140 A K Soft factor - - - QRA1 VTO Threshold voltage At Tvj = 150oC - 1.4 V rT Slope resistance At Tvj = 150oC - 2.5 mΩ Forward recovery voltage di/dt = 1000A/µs, Tj = 125oC - 250 V VFRM 2/8 Conditions Parameter SV05..F DEFINITION OF K FACTOR AND QRA1 QRA1 = 0.5x IRR(t1 + t2) dIR/dt t1 t2 k = t1/t2 τ 0.5x IRR IRR CURVES 1000 Measured under pulse conditions Instantaneous forward current IF - (A) 900 800 700 Tj = 150˚C Tj = 25˚C 600 500 2.0 2.5 3.0 3.5 4.0 4.5 Instantaneous forward voltage VF - (V) Fig.1 Maximum (limit) forward characteristics 3/8 SV05..F 500 Measured under pulse conditions Instantaneous forward current IF - (A) 400 Tj = 25˚C 300 Tj = 150˚C 200 100 0 1.0 1.5 2.0 2.5 Instantaneous forward voltage VF - (V) Fig.2 Maximum (limit) forward characteristics 4/8 3.0 SV05..F 10000 QS = ∫ IF 50µs Conditions: 0 Tj = 150 ˚C, Reverse recovered charge QS - (µC) QS VR = 100V tp = 1ms dIR/dt 1000 IRR IF = 1000A IF = 500A IF = 200A IF = 100A 100 10 1 10 100 Rate of rise of reverse current dIR/dt - (A/µs) 1000 Fig.3 Recovered charge 1000 Reverse recovery current IRR - (A) Conditions: Tj = 150˚C, IF = 1000A VR = 100V 100 10 1 10 100 Rate of rise of reverse current dIR/dt - (A/µs) 1000 Fig.4 Typical reverse recovery current vs rate of rise of reverse current 5/8 SV05..F Thermal impedance - (˚C/W) 0.1 d.c. 0.01 0.001 0.01 0.1 1 Time - (s) 10 Fig.5 Maximum (limit) transient thermal impedance - junction to case - (˚C/W) 6/8 100 SV05..F PACKAGE DETAILS - DO8 and DO8C For further package information, please contact your local Customer Service Centre. All dimensions in mm, unless stated otherwise. DO NOT SCALE. Ø8.4 ± 0.3 8 min 20 max 12 ± 0.5 3.17 max Thread M12 1/2" 20 UNF Ø27 max 8 min 3.17 max Thread M12 1/2" 20 UNF Nominal weight: 120g Mounting torque: 15Nm ±10% Nominal weight: 120g Mounting torque: 15Nm ±10% Package outine type code: DO8 Package outine type code: DO8C Type No + K - 20.6 ± 0.6 Type No + M - 18.0 ± 0.5 8 min 60 max Ø27 max Type No + K - 20.6 ± 0.6 Type No + M - 18.0 ± 0.5 12 ± 0.5 163 ± 10 Ø5.2 ± 0.2 7/8 SV05..F POWER ASSEMBLY CAPABILITY The Power Assembly group was set up to provide a support service for those customers requiring more than the basic semiconductor, and has developed a flexible range of heatsink / clamping systems in line with advances in device types and the voltage and current capability of our semiconductors. We offer an extensive range of air and liquid cooled assemblies covering the full range of circuit designs in general use today. The Assembly group continues to offer high quality engineering support dedicated to designing new units to satisfy the growing needs of our customers. Using the up to date CAD methods our team of design and applications engineers aim to provide the Power Assembly Complete solution (PACs). HEATSINKS Power Assembly has it’s own proprietary range of extruded aluminium heatsinks. They have been designed to optimise the performance or our semiconductors. Data with respect to air natural, forced air and liquid cooling (with flow rates) is available on request. For further information on device clamps, heatsinks and assemblies, please contact your nearest Sales Representative or the factory. http://www.dynexsemi.com e-mail: [email protected] HEADQUARTERS OPERATIONS DYNEX SEMICONDUCTOR LTD Doddington Road, Lincoln. Lincolnshire. LN6 3LF. United Kingdom. Tel: 00-44-(0)1522-500500 Fax: 00-44-(0)1522-500550 DYNEX POWER INC. Unit 7 - 58 Antares Drive, Nepean, Ontario, Canada K2E 7W6. Tel: 613.723.7035 Fax: 613.723.1518 Toll Free: 1.888.33.DYNEX (39639) CUSTOMER SERVICE CENTRES France, Benelux, Italy and Spain Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 64 46 54 50 North America Tel: 011-800-5554-5554. Fax: 011-800-5444-5444 UK, Germany, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 SALES OFFICES France, Benelux, Italy and Spain Tel: +33 (0)1 69 18 90 00. Fax: +33 (0)1 64 46 54 50 Germany Tel: 07351 827723 North America Tel: (613) 723-7035. Fax: (613) 723-1518. Toll Free: 1.888.33.DYNEX (39639) / Tel: (831) 440-1988. Fax: (831) 440-1989 / Tel: (949) 733-3005. Fax: (949) 733-2986. UK, Germany, Scandinavia & Rest Of World Tel: +44 (0)1522 500500. Fax: +44 (0)1522 500020 These offices are supported by Representatives and Distributors in many countries world-wide. © Dynex Semiconductor 2000 Publication No. DS4144-4 Issue No. 4.0 January 2000 TECHNICAL DOCUMENTATION – NOT FOR RESALE. PRINTED IN UNITED KINGDOM Datasheet Annotations: Dynex Semiconductor annotate datasheets in the top right hard corner of the front page, to indicate product status. The annotations are as follows:Target Information: This is the most tentative form of information and represents a very preliminary specification. No actual design work on the product has been started. Preliminary Information: The product is in design and development. The datasheet represents the product as it is understood but details may change. Advance Information: The product design is complete and final characterisation for volume production is well in hand. No Annotation: The product parameters are fixed and the product is available to datasheet specification. This publication is issued to provide information only which (unless agreed by the Company in writing) may not be used, applied or reproduced for any purpose nor form part of any order or contract nor to be regarded as a representation relating to the products or services concerned. No warranty or guarantee express or implied is made regarding the capability, performance or suitability of any product or service. The Company reserves the right to alter without prior notice the specification, design or price of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user's responsibility to fully determine the performance and suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. These products are not suitable for use in any medical products whose failure to perform may result in significant injury or death to the user. All products and materials are sold and services provided subject to the Company's conditions of sale, which are available on request. All brand names and product names used in this publication are trademarks, registered trademarks or trade names of their respective owners. 8/8