55 Commerce Way Woburn, MA 01801 (781) 935 - 4442 (781) 938 - 5867 www.gilway.com GHB-GW20-O Features Description ?SUBMINIATURE PACKAGE. The Super Bright Orange source color devices are made ?WIDE VIEWING ANGLE. ?LONG LIFE - SOLID STATE RELIABILITY. SUBMINIATURE SOLID STATE LAMP ?LOW PACKAGE PROFILE. ?PACKAGE : with DH InGaAlP on GaAs substrate Light Emitting Diode. 1000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. REV NO: V.2 DATE: NOV/13/2002 PAGE: 1 OF 4 Selection Guide P Pa a art rt N No. No o.. WATER CLEAR Super Bright Orange (InGaAIP) GHB-GW20-O m c dd) v ((mcd) IIv (mc @ 20 mA Lens Typ L e ens nss T Tyy p e Diic ce ng ew iin V Viewin Viiiew Angle Miin n. in. T Typ Tyyyp pp.. 480 1300 20° Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25 C its Un nit t io nss o n d iition T Test e est ss t C Cond 610 nm I F =20mA Super Bright Orange 601 nm I F =20mA Spectral Line Half-width Super Bright Orange 29 nm I F =20mA C Capacitance Super Bright Orange 30 pF V F =0V;f =1MHz VF Forward Voltage Super Bright Orange 2.0 2.5 V I F =20mA IR Reverse Current Super Bright Orange 10 uA V R = 5V S Sy yymbo ymbol mb o l P Pa a aramete r a m e t er ev ic e De evic TTyyyp pp.. peak Peak Wavelength Super Bright Orange D Dominate Wavelength 1/2 xx.. ax Ma Absolute Maximum Ratings at TA=25 C P Pa a arameter r am e t er its Un nit Super Bright Orange Power dissipation 75 mW DC Forward Current 30 mW 195 mA Peak Forward Current [1] Reverse Voltage 5 V Operating/Storage Temperature -40 C To +85 C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. REV NO: V.2 DATE: NOV/13/2002 PAGE: 2 OF 4 REV NO: V.2 DATE: NOV/13/2002 PAGE: 3 OF 4 SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) REV NO: V.2 DATE: NOV/13/2002 PAGE: 4 OF 4