FR601G THRU FR607G GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Glass passivated junction in R-6 package 6.0 ampere operation at TA=75 with no thermal runaway Fast switching for high efficiency Mechanical Data DIM ENSIONS Case: Molded plastic, R-6 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Band denotes cathode Mounting Position: Any Weight: 0.074 ounce, 2.105 grams inches DIM Maximum Ratings and Electrical Characteristics Symbols FR 601G FR 602G mm Min. Max. Min. Max. A 0.339 0.358 8.6 9.1 B 0.339 0.358 8.6 9.1 C 0.047 0.052 1.2 1.3 D 1.000 - 25.40 - @25 Note unless otherwise specified FR 603G FR 604G FR 605G FR 606G FR 607G Units Volts Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward rectified current at TA=75 I(AV) 6.0 Amps Peak forward surge current 8.3mS single half sine-wave IFSM 300.0 Amps Maximum instantaneous forward voltage IFM=6.0A; TA=25 (Note 1) VF 1.3 Volts Maximum DC reverse current at rated DC blocking voltage IR 10.0 150.0 TA=25 TA=55 Maximum reverse recovery time at IF=0.5A, IR=1.0A, Irr=0.25A Typical junction capacitance Trr Measured at 1.0MHz, VR=4.0V Operating and storage temperature range 150 250 CJ 150 TJ, TSTG -65 to +150 Note: (1) Pulse test: Pulse width 300uSec, Duty cycle 1% 1 A 500 nS F RATINGS AND CHARACTERISTIC CURVES 2 RATINGS AND CHARACTERISTIC CURVES 3