GOOD-ARK HER3007

HER3001 THRU HER3007
HIGH EFFICIENCY RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 3.0 Amperes
Features
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Low cost
Ultrafast recovery time for high efficiency
Low forward voltage, high current capability
Low leakage
High surge capability
High temperature soldering guaranteed:
250 , 0.375” (9.5mm) lead length for 10 seconds,
5 lbs. (2.3Kg) tension
Mechanical Data
DIM ENSIONS
Case: DO-201AD, molded plastic body over passivated chip
Terminals: Plated axial leads solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.042 ounce, 1.19 grams
DIM
inches
mm
Min.
Max.
Min.
Max.
A
0.283
0.374
7.20
9.50
B
0.189
0.208
4.80
5.30
C
0.048
0.051
1.20
1.30
D
1.000
-
25.40
-
Note
Maximum Ratings and Electrical Characteristics
Ratings at 25
ambient temperature unless otherwise specified.
Symbols
HER
3001
HER
3002
HER
3003
HER
3004
HER
3005
HER
3006
HER
3007
Units
Maximum repetitive peak reverse voltage
VRRM
50
100
200
400
600
800
1000
Volts
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
Volts
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=55
I(AV)
3.0
Amps
Peak forward surge current
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method) at TA=55
IFSM
150.0
Amps
Maximum instantaneous forward voltage at 3.0A
VF
Maximum DC reverse current
at rated DC blocking voltage
TA=25
TA=125
IR
Maximum reverse recovery time (Note 1) TJ=25
Trr
CJ
Operating junction and storage temperature range
R
R
1.7
10.0
50.0
Typical junction capacitance (Note 2)
Typical thermal resistance (Note 3)
1.0
50.0
JA
JL
TJ, TSTG
A
100.0
nS
45.0
F
20.0
8.5
/W
-55 to +150
Notes:
(1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A
(2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
(3) Thermal resistance from junction to lead and from junction to ambient with 0.375” (9.5mm) lead length, both leads attached to heatsink
1
Volts
RATINGS AND CHARACTERISTIC CURVES
2