1N5400 THRU 1N5408 GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High surge current capability Construction utilizes void-free molded plastic technique 3.0 ampere operation at TL=105 with no thermal runaway Typical IR less than 0.1 A High temperature soldering guaranteed: 250 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: DO-201AD molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.042 ounce, 1.19 grams inches DIM mm Min. Max. Min. Max. A 0.283 0.374 7.20 9.50 B 0.189 0.208 4.80 5.30 C 0.048 0.051 1.20 1.30 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Symbols 1N 5400 1N 5401 1N 5402 1N 5403 1N 5404 1N 5405 1N 5406 1N 5407 1N 5408 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 300 400 500 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 Volts Maximum DC blocking voltage to TA=150 VDC 50 100 200 300 400 500 600 800 1000 Volts Maximum average forward rectified current 0.5" (12.5mm) lead length at TL=105 I(AV) 3.0 Amps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) at TL=105 IFSM 200.0 Amps Maximum instantaneous forward voltage at 3.0A VF 0.95 Volts IR 10.0 300.0 A CJ 30.0 F 20.0 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=150 Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) R JA Maximum DC blocking voltage temperature TA +150 Operating junction temperature range TJ -50 to +170 TSTG -50 to +170 Storage temperature range Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (2) Thermal resistance from junction to ambient at 0.375 (9.5mm) lead length, P.C.B. mounted with 0.8X0.8 (20X20mm) copper heat sinks 1 RATINGS AND CHARACTERISTIC CURVES 2