6A05 THRU 6A10 GENERAL PURPOSE PLASTIC RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 6.0 Amperes Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High forward current capability Construction utilizes void-free molded plastic technique High surge current capability High temperature soldering guaranteed: 250 /10 seconds, 0.375 (9.5mm) lead length, 5 lbs. (2.3Kg) tension Mechanical Data DIM ENSIONS Case: Void-free molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.074 ounce, 2.1 grams inches DIM mm Min. Max. Min. Max. A 0.339 0.358 8.6 9.1 B 0.339 0.358 8.6 9.1 C 0.047 0.052 1.2 1.3 D 1.000 - 25.40 - Note Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Symbols 6A05 6A1 6A2 6A4 6A6 6A8 6A10 Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current at TA=60 , 0.375" (9.5mm) lead length (Fig 1) TL=60 , 0.125" (3.18mm) lead length (Fig 2) I(AV) 6.0 22.0 Amps Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 400.0 Amps Maximum instantaneous forward voltage at 6.0A 100A VF Maximum DC reverse current at rated DC blocking voltage IR TA=25 TA=100 0.90 1.30 1.0 1.4 Volts 10.0 1.0 A mA Typical reverse recovery time (Note 1) Trr 2.5 S Typical junction capacitance (Note 2) CJ 150.0 F 20.0 4.0 /W Typical thermal resistance (Note 3) Operating junction and storage temperature range R R JA JL TJ, TSTG -50 to +150 Notes: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0MHz and applied reverse voltage of 4.0 volts (3) Thermal resistance from junction to ambient and from junction to lead at 0.375 (9.5mm) lead length, P.C.B. mounted with 1.1X1.1 (30X30mm) copper pads 1 RATINGS AND CHARACTERISTIC CURVES 2